10.4 CuttingSpeedFeed

The rate at which the material is cut, which would depend e.g. on the feed of the material, the speed and sharpness of the knife.

Units: m/min or ft/min

Figure 8 - CuttingSpeed_Feed Overview

10.4.1 MaxMachineLimit

The maximum mechanicaly achievable speed by the machine due to the drive, gears and other moving parts. The value applies for cutting and idle speed.

Units: m/min or ft/min

10.4.2 RecipeLimit

Provides the order (recipe) specific limit of the cutting speed when the knife is cutting material.

Same units as MaxMachineLimit

10.4.3 RecipeLimitIdle

Provides the order (recipe) specific limit of the return speed of the knife to cut start position.

Same units as MaxMachineLimit

10.4.4 Override

Provides the current override value in percent (e.g. 50 %), which is manually adjusted by the machine operator. The cutting speed setpoint calculates as follows: Setpoint = Override x RecipeLimit.

10.4.5 OverrideIdle

Same as override but for idle speed.

10.4.6 CurrentValue

Provides the current actual cutting speed.

Same units as MaxMachineLimit