Search

Scope: Core (OPC-10000-*) All specs

23 result(s) for SubStateMachine

OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.4.6 FiniteStateMachineType

unique across all States defined in the StateMachine . Be aware that States in a SubStateMachine may have the same StateNumber or BrowseName as States in the parent machine. A concrete ... have a HasSubStateMachine Reference to the StateMachineType Object which represents the child States . The SubStateMachine is not active if the parent State is not active. In this case the CurrentState
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.4.10 InitialStateType

FiniteStateMachine does not have to have a State of this type. A SubStateMachine goes into its initial state whenever the parent state is entered. However, a state machine may define ... transition that goes directly to a state of the SubStateMachine . In this case the SubStateMachine goes into that State instead of the initial State . The two scenarios are illustrated
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.4.16 HasSubStateMachine

most one HasSubStateMachine Reference . The SourceNode (the state) and the TargetNode (the SubStateMachine ) shall belong to the same StateMachine . Therefore, the SourceNode shall be referenced from the ObjectType FiniteStateMachineType
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.4.17 TransitionEventType

StateMachine instance where the Transition occurs. If the Transition occurs in a SubStateMachine , then the NodeId of the SubStateMachine has to be used. If the Transition occurs between a StateMachine ... SubStateMachine , then the NodeId of the StateMachine has to be used, independent of the direction of the Transition . Transition identifies the Transition that triggered the Event . FromState identifies the State
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.4.18 AuditUpdateStateEventType

StateMachine instance where the State changed. If the State changed in a SubStateMachine , then the NodeId of the SubStateMachine has to be used. The SourceName for Events of this type
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.4.19 Special Restrictions on subtyping StateMachines

SubStateMachines , it may add Transitions from the States to the States of the SubStateMachine , and it may add Causes and Effects to a Transition . In addition, a subtype
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.5.2 StateMachineType with a SubStateMachine using inheritance

StateMachineType with a SubStateMachine using inheritance Figure 8 - Example of a StateMachineType with a SubStateMachine using inheritance Figure 8 gives an example of a StateMachineType having a SubStateMachine ... contains an Object "MySubMachine" of type "AnotherStateMachineType" representing a SubStateMachine . The "State1" references this Object with a HasSubStateMachine Reference , thus it is a SubStateMachine
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.5.4 Example of a StateMachine having Transition to SubStateMachine

Example of a StateMachine having Transition to SubStateMachine The StateMachines shown so far only had Transitions between States on the same level, that is, on the same StateMachine . Of cause ... often required to have Transitions between States of the StateMachine and States of its SubStateMachine . Because a SubStateMachine can be defined by another StateMachineType and this type can be used
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.5.5 Example of a StateMachine adding a SubStateMachine on a Subtype

Example of a StateMachine adding a SubStateMachine on a Subtype When a subtype of FiniteStateMachineType having States extends the StateMachine , it is not allowed to add additional States , but instead ... MySubStateMachineType" is a subtype and extends the StateMachine with a SubStateMachine as defined in Figure 13 . The "MySubSubStateMachineType" is another subtype as defined in Figure
OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control

6.2.3 ISA95PrepareStateMachineType

ISA95PrepareStateMachineType This ObjectType describes a SubStateMachine that a job order may use while already stored in the system but not being executed. The ObjectType formally defined in Table 40 . Table
OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control

6.2.4 ISA95EndedStateMachineType

ISA95EndedStateMachineType This ObjectType describes a SubStateMachine that a job order may use after being executed. The ObjectType formally defined in Table 43 . Table 43 - ISA95EndedStateMachineType definition Attribute Value BrowseName ISA95EndedStateMachineType
OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control

6.2.5 ISA95InterruptedStateMachineType

ISA95InterruptedStateMachineType This ObjectType describes a SubStateMachine a job order may use when being interrupted. The ObjectType formally defined in Table 46 . Table 46 - ISA95InterruptedStateMachineType definition Attribute Value BrowseName ISA95InterruptedStateMachineType IsAbstract
OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type Definitions

6.3.1 Extension of MachineryItemState

this specification the MachineryItemState defined in OPC UA for Machinery is extended by a SubStateMachine for the State Executing . Figure 4 - Extended MachineryItemState For this, the ExtrusionMachineryItemState_StateMachineType is defined
OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type Definitions

6.3.2 Definition of ExtrusionExecutingSubState_StateMachineType

Definition of ExtrusionExecutingSubState_StateMachineType The ExtrusionExecutingSubState_StateMachineType is used for a SubStateMachine which divides the Executing State into ReadyToRun , ManualRun and ControlledRun . This SubStateMachine is not active if the parent
OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management

8.3.11 MaintenanceModeStateMachineType

different modes of maintenance being perfomed on a machine. It is used as a SubStateMachine . If the parent state is not active, the 0:CurrentState Variable of the MaintenanceModeStateMachineType shall
OPC-40563-4 – OPC UA for Mining - Transport Dumping - Part 4: Conveying

7.1.2 Extension of MachineryItemState for belt conveyor machines

MachineryItemState defined in OPC 40001-1 UA for Machinery is extended by a SubStateMachine for the State OutOfService, NotExecuting and Executing . An exemplary illustration can be found in Figure
OPC-40563-4 – OPC UA for Mining - Transport Dumping - Part 4: Conveying

7.1.3 BeltConveyorOutOfServiceSubState_StateMachineType ObjectType Definition

BeltConveyorOutOfServiceSubState_StateMachineType ObjectType Definition The BeltConveyorOutOfServiceSubState_StateMachineType is used for a SubStateMachine which divides the OutOfServices State into Booting and NoClearance . This SubStateMachine is not active if the parent State
OPC-40563-4 – OPC UA for Mining - Transport Dumping - Part 4: Conveying

7.1.4 BeltConveyorNotExecutingSubState_StateMachineType ObjectType Definition

BeltConveyorNotExecutingSubState_StateMachineType ObjectType Definition The BeltConveyorNotExecutingSubState_StateMachineType is used for a SubStateMachine which divides the NotExecuting State into BrakeClosed, IsStopped, Ready and AlertSignal . This SubStateMachine is not active
OPC-40563-4 – OPC UA for Mining - Transport Dumping - Part 4: Conveying

7.1.5 BeltConveyorExecutingSubState_StateMachineType ObjectType Definition

BeltConveyorExecutingSubState_StateMachineType ObjectType Definition The BeltConveyorExecutingSubState_StateMachineType is used for a SubStateMachine which divides the Executing State into ReverseRunning, ForwardRunning and InitialStopping . This SubStateMachine is not active if the parent
OPC-40719 – OPC UA for Plasma Surface Technology

7.2.2 Extension of MachineryItemState for low pressure plasma surface treatment machines

this specification the MachineryItemState defined in OPC UA for Machinery is extended by a SubStateMachine for the State NotExecuting . An exemplary illustration can be found in Figure 10 . Figure
OPC-40719 – OPC UA for Plasma Surface Technology

7.2.3 LowPressurePlasmaNotExecutingSubState_StateMachineType ObjectType Definition

LowPressurePlasmaNotExecutingSubState_StateMachineType ObjectType Definition The LowPressurePlasmaNotExecutingSubState_StateMachineType is used for a SubStateMachine which divides the NotExecuting State into Vented and Standby . This SubStateMachine is not active if the parent State
OPC-40719 – OPC UA for Plasma Surface Technology

7.3.2 Extension of MachineryItemState for atmospheric pressure plasma surface treatment machines

this specification the MachineryItemState defined in OPC UA for Machinery is extended by a SubStateMachine for the State NotExecuting . An exemplary illustration can be found in Figure 11 . Figure
OPC-40719 – OPC UA for Plasma Surface Technology

7.3.3 AtmosphericPressurePlasmaNotExecutingSubState_StateMachineType ObjectType Definition

AtmosphericPressurePlasmaNotExecutingSubState_StateMachineType ObjectType Definition The AtmosphericPressurePlasmaNotExecutingSubState_StateMachineType is used for a SubStateMachine which divides the NotExecuting State into Idle and Standby . This SubStateMachine is not active if the parent State