Search

7 result(s) for SetValue

• OPC-40082-2 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 2: Hot runner devices
  9.8 ActiveSetValues
  Values for ActiveSetValues EnumValue ValueAsText Description 0 First Use of value stored as SetValue 1 Second Use of value stored as SecondSetValue 2 Standby Use of value stored as SetStandbyValue ... have a boost, for the others, the value of BoostSetValue is the same as SetValue . A server can provide manufacturer specific values with EnumValues ≥ 100. This is a central Variable
• OPC-40082-2 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 2: Hot runner devices
  9.9 ReactionOnDisconnect, SessionNameForReactionOnDisconnect, SetReactionOnDisconnect
  SwitchOff Switch hot runner off when disconnected 2 FirstSetValue Use of value stored as SetValue 3 SecondSetValue Use of value stored as SecondSetValue 4 Standby Use of value stored ... have a boost, for the others, the value of SecondSetValue is the same as SetValue . A server can provide manufacturer specific values with EnumValues ≥ 100. It is possible, that
• OPC-40082-2 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 2: Hot runner devices
  16.4 EvenHeatUpEnabled
  EvenHeatUpEnabled Enables even heat-up process until nominal SetValue of Temperature of ZoneType is reached. This stands for a process for uniform heating of a mould. Many manufacturers
• OPC-40082-3 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 3: LSR Dosing Systems
  9.11 DeliveryPressure, DeliveryPressureMeasuringPoint
  elements shall always be used together. For systems with DeliveryPressure the components ActualValue , SetValue , UpperTolerance and LowerTolerance defined in the ControlledParameterType are mandatory. If the upper or lower tolerance band
• OPC-40082-3 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 3: LSR Dosing Systems
  9.12 DeliveryFlowrate
  DeliveryFlowrate For system with delivery volumetric flow rate the components ActualValue , SetValue , UpperTolerance and LowerTolerance are mandatory. If the upper or lower tolerance band is passed it is documented
• OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions
  22.10 ResetMonitoring
  monitoring sensitivity. This can be used e.g. after a process change with new SetValue to adapt the monitoring. Signature ResetMonitoring (); The method has no Input - or OutputArguments . Table 130 - ResetMonitoring
• OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions
  23 ControlledParameterType
  down, which are only readable in the MonitoredParameterType , are writable in the ControlledParameterType . If SetValue (already writeable in MonitoredParameterType ) is changed by the client within the ControlledParameterType , the device shall