Search

Scope: Core (OPC-10000-*) All specs

14 result(s) for Mode

OPC-10000-20 – OPC Unified Architecture - Part 20: File Transfer

4.2.2 Open

NotReadable when the file is already opened for writing. Signature Open( [in] Byte mode [out] UInt32 fileHandle ); Argument Description mode Indicates whether the file should be opened only for read ... read and write operations and where the initial position is set. The mode is an 8-bit unsigned integer used as bit mask with the structure defined in the following
OPC-10000-81 – OPC Unified Architecture - Part 81: UAFX Connecting Devices and Information Model

6.6.3 PubSubConnectionEndpointType definition

Node Class BrowseName DataType TypeDefinition Other Subtype of the 3:ConnectionEndpointType HasComponent Variable 3:Mode 2:PubSubConnectionEndpointModeEnum 0:BaseDataVariableType M ConformanceUnits UAFX ConnectionEndpoint PubSub Table 76 - PubSubConnectionEndpointType additional References SourceBrowsePath ... PublishSubscribe 0:<PubSubConnection> 0:<WriterGroup> 0:<DataSetWriter> Mode defines the mode of the ConnectionEndpoint with respect to the Connection . The modes are formally defined
OPC-10000-81 – OPC Unified Architecture - Part 81: UAFX Connecting Devices and Information Model

10.42 PubSubConnectionEndpointModeEnum

PubSubConnectionEndpointModeEnum This enumeration defines the possible values of the Mode of the PubSubConnectionEndpointType . The enumeration is formally defined in Table 208 . Table 208 - PubSubConnectionEndpointModeEnum items Name Value Description PublisherSubscriber
OPC-30020 – MDIS OPC UA Companion Specification

6.9.4 SetOperationMode Method

SetOperationMode Method SetOperationMode Method is used to change the operation mode of the CIMV. Signature SetOperationMode ( [in] CIMVOperationModeEnum Mode, [in] SEMEnum SEM, [in] 0:Boolean ShutdownRequest); Table 60 - SetOperationMode Method ... Arguments Argument Description Mode Enumeration indicating the requested operation mode SEM The selection of which SEM to send the command to ShutdownRequest Boolean indicates that this command is part
OPC-30142 – OPC UA for PROFINET Remote IO

7.2.2.1 RioPaAnalogInputChannelType

HasComponent Variable SignalValue 0:Double 0:BaseAnalogType O, RO 0:HasComponent Variable Mode RioChannelModeEnumeration 0:BaseDataVariableType M, RO 0:HasComponent Variable ManualProcessValue RioAnalogDataType 0:BaseDataVariableType O, RO 0:HasComponent Variable ... obtained by reading the input signal through the signal coupling in the Transducer . The Mode Variable contains the current mode of operation encoded as RioChannelModeEnumeration . If Mode has the Value
OPC-30142 – OPC UA for PROFINET Remote IO

7.2.2.2 SetMode Method

SetMode Method This Method sets the Value of the Mode Variable . The security constraints defined in chapter 6.7 apply. Signature SetMode ( [in] RioChannelModeEnumeration Mode ); Argument Description Mode Desired content ... Mode Variable . The Method Result Codes (defined in Call Service) are defined in Table 33 . Table 33 - Possible Method result codes Result Code Description Good The Method execution was successful
OPC-30142 – OPC UA for PROFINET Remote IO

7.2.3.1 RioPaAnalogOutputChannelType

HasComponent Variable SignalValueReadback 0:Double 0:BaseAnalogType O, RO 0:HasComponent Variable Mode RioChannelModeEnumeration 0:BaseDataVariableType M, RO 0:HasComponent Variable ManualOutValue RioAnalogDataType 0:BaseDataVariableType O, RO 0:HasComponent Variable ... contains the output signal read back through the signal coupling in the Transducer . The Mode Variable contains the current mode of operation encoded as RioChannelModeEnumeration . If Mode has the Value
OPC-30142 – OPC UA for PROFINET Remote IO

7.2.3.2 SetMode Method

SetMode Method This Method sets the Value of the Mode Variable . The security constraints defined in chapter 6.7 apply. Signature SetMode ( [in] RioChannelModeEnumeration Mode ); Argument Description Mode Desired content ... Mode Variable . The Method Result Codes (defined in Call Service) are defined in Table 39 . Table 39 - Possible Method result codes Result Code Description Good The Method execution was successful
OPC-30142 – OPC UA for PROFINET Remote IO

7.2.4.1 RioPaDigitalInputChannelType

HasComponent Variable SignalValue 0:Double 0:BaseAnalogType O, RO 0:HasComponent Variable Mode RioChannelModeEnumeration 0:BaseDataVariableType M, RO 0:HasComponent Variable ManualProcessValue 0:Boolean 0:BaseDataVariableType O, RO 0:HasComponent ... obtained by reading the input signal through the signal coupling in the Transducer . The Mode Variable contains the current mode of operation encoded as RioChannelModeEnumeration . If Mode has the Value
OPC-30142 – OPC UA for PROFINET Remote IO

7.2.4.2 SetMode Method

SetMode Method This Method sets the Value of the Mode Variable . The security constraints defined in chapter 6.7 apply. Signature SetMode ( [in] RioChannelModeEnumeration Mode ); Argument Description Mode Desired content ... Mode Variable . The Method Result Codes (defined in Call Service) are defined in Table 45 . Table 45 - Possible Method result codes Result Code Description Good The Method execution was successful
OPC-30142 – OPC UA for PROFINET Remote IO

7.2.5.1 RioPaDigitalOutputChannelType

HasComponent Variable SignalValueReadback 0:Double 0:BaseAnalogType O, RO 0:HasComponent Variable Mode RioChannelModeEnumeration 0:BaseDataVariableType M, RO 0:HasComponent Variable ManualOutValue 0:Boolean 0:BaseDataVariableType O, RO 0:HasComponent ... contains the output signal read back through the signal coupling in the Transducer . The Mode Variable contains the current mode of operation encoded as RioChannelModeEnumeration . If Mode has the Value
OPC-30142 – OPC UA for PROFINET Remote IO

7.2.5.2 SetMode Method

SetMode Method This Method sets the Value of the Mode Variable . The security constraints defined in chapter 6.7 apply. Signature SetMode ( [in] RioChannelModeEnumeration Mode ); Argument Description Mode Desired content ... Mode Variable . The Method Result Codes (defined in Call Service) are defined in Table 51 . Table 51 - Possible Method result codes Result Code Description Good The Method execution was successful
OPC-40084-3 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 3: Extruder

7.7.7 Mode

Mode The Mode Property provides information, how the throughput of the feeder is controlled. Table 4 - FeedingModeEnumeration Definition Name Value Description ONLY_CONVEYING 0 The throughput is not controlled ... only falling through a feed opening OTHER 1 Throughput is controlled, but in another mode than these below GRAVIMETRIC 2 The throughput is controlled by a gravimetric dosing system. VOLUMETRIC
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management

8.4.7.1 EnterStepSequenceEventType

steps required, for example a call to the Sync method with a particular mode argument. Figure 34 - Overview EnterStepSequenceEvent Table 120 - EnterStepSequenceEventType definition Attribute Value BrowseName EnterStepSequenceEventType IsAbstract False References