Search

Scope: Core (OPC-10000-*) All specs

12 result(s) for MeasuringDeviceType

OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type Definitions

8.2 ExtrusionTemperatureZoneType

BrowseName ExtrusionTemperatureZoneType IsAbstract False References Node Class BrowseName DataType TypeDefinition Other Subtype of 3: MeasuringDeviceType defined in OPC 40083 0:HasComponent Variable NominalHeatingPower 0:Double 0:AnalogUnitType ... NOTES: The temperature of the zone is stored inside the MonitoredParameter object of the MeasuringDeviceType . The TemperatureZoneType differs from the TemperatureZoneType defined in OPC 40083 to make
OPC-40084-3 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 3: Extruder

7.2 MeltTemperatureZones

Object is a container for the melt temperature zones. The zones are modelled as MeasuringDeviceType as defined in OPC 40083. When instances for melt temperature zones are created, the BrowseNames
OPC-40084-3 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 3: Extruder

7.3 MeltPressureZones

Object is a container for the melt pressure zones. The zones are modelled as MeasuringDeviceType as defined in OPC 40083. When instances for melt pressure zones are created, the BrowseNames
OPC-40084-3 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 3: Extruder

7.4 VacuumZones

This Object is a container for the vacuum zones. The zones are modelled as MeasuringDeviceType as defined in OPC 40083. When instances for vacuum zones are created, the BrowseNames shall
OPC-40084-3 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 3: Extruder

7.7.5 Target

relevant ExtrusionTemperatureZone or feeder. NOTE: The Id Property is modelled inside the MeasuringDeviceType which is the basis for all zones
OPC-40084-6 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 6: Filter

6.9 HydraulicPressure

HydraulicPressure This Object controls the hydraulic pressure of the filter. The MeasuringDeviceType is defined
OPC-40084-6 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 6: Filter

7.2 MeltTemperatureZones

Object is a container for the melt temperature zones. The zones are modelled as MeasuringDeviceType as defined in OPC 40083. When instances for melt temperature zones are created, the BrowseNames
OPC-40084-6 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 6: Filter

7.3 MeltPressureZones

Object is a container for the melt pressure zones. The zones are modelled as MeasuringDeviceType as defined in OPC 40083. When instances for melt pressure zones are created, the BrowseNames
OPC-40084-10 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 10: Calibrator

6.3 PositionZ, PositionsX, PositionsY

position and the several x- and y-positions of the calibrator. The MeasuringDeviceType and MeasuringDeviceType are defined in OPC 40083. Definition of directions (from extruder output): Figure 2 - Definition
OPC-40084-10 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 10: Calibrator

6.4 PositionsPipeSupport

PositionsPipeSupport This Object represents the positions of a pipe support. The MeasuringDeviceType is defined
OPC-40084-10 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 10: Calibrator

6.5.1 WaterFlowIn, WaterFlowOut

rate (in volume per time) of the water in the calibration zone. The used MeasuringDeviceType is defined
OPC-40084-10 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 10: Calibrator

6.5.2 WaterTemperatureIn, WaterTemperatureOut

WaterTemperatureOut In and out temperature of the water in the calibration zone. The used MeasuringDeviceType is defined