Search

4 result(s) for LowerTolerance

• OPC-40082-3 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 3: LSR Dosing Systems
  9.11 DeliveryPressure, DeliveryPressureMeasuringPoint
  always be used together. For systems with DeliveryPressure the components ActualValue , SetValue , UpperTolerance and LowerTolerance defined in the ControlledParameterType are mandatory. If the upper or lower tolerance band is passed
• OPC-40082-3 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 3: LSR Dosing Systems
  9.12 DeliveryFlowrate
  DeliveryFlowrate For system with delivery volumetric flow rate the components ActualValue , SetValue , UpperTolerance and LowerTolerance are mandatory. If the upper or lower tolerance band is passed it is documented
• OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions
  22.5 UpperTolerance, LowerTolerance, UpperTolerance2, LowerTolerance2, MinValue, MaxValue
  UpperTolerance, LowerTolerance, UpperTolerance2, LowerTolerance2, MinValue, MaxValue These parameters are used to define limits for the monitored parameter. Exceeding the (relative) tolerance values creates a warning while exceeding the (absolute) Min/MaxValues ... UpperTolerance2 and LowerTolerance2 a second tolerance band can be defined. NOTE: When UpperTolerance and/or LowerTolerance are used, the SetValue shall be also given. NOTE: When UpperTolerance2 and/or LowerTolerance2 are used
• OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions
  22.6 Status
  BELOW_LOWER_TOLERANCE2 ActualValue is below LowerTolerance2 4 BELOW_LOWER_TOLERANCE ActualValue is below LowerTolerance 5 WITHIN_TOLERANCE ActualValue is between LowerTolerance and UpperTolerance 6 ABOVE_UPPER_TOLERANCE ActualValue