Search
15 result(s) for Executing
-
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics7.1.10.3 StartTaskcontrol. Upon successful execution of the Start Method , the MaintenanceState shall be changed to Executing and an accompanying event shall be raised. The signature of this Method is specified below
-
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building BlocksHasComponent Object NotAvailable - 0:StateType - 0:HasComponent Object OutOfService - 0:StateType - 0:HasComponent Object Executing - 0:StateType - 0:HasComponent Object NotExecuting - 0:StateType - 0:HasComponent Object FromNotAvailableToOutOfService - 0:TransitionType ... into the Machine or an automatic or manual activation to be executed. The Executing State represents that the Machine is available & functional and is actively performing an activity (pursues
-
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building BlocksMachineryOperationMode Processing can be interpreted as SEMI E10 "Standby time". The MachineryItemState Executing and the MachineryOperationMode Processing can be interpreted as SEMI E10 "Productive time ... required. The APT can be derived from the combination of the MachineryItemState "Executing" and the MachineryOperationMode "Processing". Alternatively, the APT can also be derived from
-
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration7.12.1 Start Methodcode. The Start Method allows an authorized Client to command the system to the Executing State. Table 51 - Start Method Arguments Argument Description Status 0 - OK - Everything
-
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration7.12.2 Stop MethodStatus ); The Stop Method allows an authorized Client to command the system to stop executing and leave the Executing state. In conjunction with the usage of this method, the transient ... states can be expressed with Substate machines within the Executing state (e.g. the ExecutingSubstateMachine in 7.14) The input argument StopMode must be either 0 or one of those listed
-
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration7.13.1 OverviewTypically, all task controls which participate in system functionality are in in Ready (or Executing ) state before calling the GoToReady() method on system level. When the preparation is done successfully
-
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integrationstate machine with all transitions is shown in When the state machine changes from Executing State to Ready State caused by internal behaviour of the task control (e.g. because program
-
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration7.16.1 OverviewHasComponent Object Idle 0:StateType 0:HasComponent Object Ready 0:StateType 0:HasComponent Object Executing 0:StateType 0:HasComponent Object IdleToIdle 0:TransitionType 0:HasComponent Object ReadyToIdle 0:TransitionType ... program. Ready The task control is loaded with a program and is not executing the program. Executing The task control is loaded with a program and is executing the program
-
OPC-40082-4 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 4: Dosing Systemsdefined in this specification. StartDosing (defined in 8.7 ) triggers the transition from NotExecuting to Executing if RemoteControlActivated (defined in ) is in mode ... transition is performed by the server. The transition from Executing state to any other state can be triggered in different ways depending on the application, e.g. automatically by the server
-
OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type DefinitionsMachineryItemState and MachineryOperationMode , where for the first a sub-state machine with substates for Executing is added. Table 2 - ExtrusionDeviceType Additional Subcomponents BrowsePath References NodeClass BrowseName DataType TypeDefinition Other
-
OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type Definitionsdefined in OPC UA for Machinery is extended by a SubStateMachine for the State Executing . Figure 4 - Extended MachineryItemState For this, the ExtrusionMachineryItemState_StateMachineType is defined in Table 3 . Table ... NotAvailable 0:StateType 0:HasComponent Object 4:OutOfService 0:StateType 0:HasComponent Object 4:Executing 0:StateType 0:HasComponent Object 4:NotExecuting 0:StateType 0:HasComponent Object 4:FromNotAvailableToOutOfService
-
OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type DefinitionsExtrusionExecutingSubState_StateMachineType The ExtrusionExecutingSubState_StateMachineType is used for a SubStateMachine which divides the Executing State into ReadyToRun , ManualRun and ControlledRun . This SubStateMachine is not active if the parent State Executing
-
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result managementthere is no error, the vision system carries out its task, going through the Executing state to return to state Ready waiting for further instructions. There are many other possibilities
-
OPC-40444 – OPC UA for Textile Testing Devicestime the TTD is in the different MachineryItemState states. The MachineryItemState states are: Executing , NotExecuting , NotAvailable and OutOfService . The MachineStatisticsType is formally defined in Table 33 . Table 33 - MachineStatisticsType Definition ... Conformance Units TTD_MachineStatisticsType TotalExecutingTime stores the total time in ms the TTD was executing. TotalNotAvailableTime stores the total time in ms the TTD was not available. TotalNotExecutingTime stores
-
OPC-40740 – OPC UA for Process Air Extraction and Filtration Systems (PAEFS)about the state of a MachineryItem . It defines the states NotAvailable , OutOfService , NotExecuting and Executing . The exact semantics of the states are defined in OPC 40001-1 . The StateMachine defines