Search

18 result(s) for Airnet

• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  3.2.1 Airnet
  Airnet Piping and all Components between at least two distinct points, the inputs and outputs of the Airnet , in a Compressed Air System . Note 1 to entry: A Component
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  3.2.2 CASPart
  Compressed Air System . Note 1 to entry: CASParts defined in this specification are: Airnet , all Components , Main Control System
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  3.2.4 Compressed Air System
  System System that generates compressed air, consists of Components and at least one Airnet , and is commonly equipped with one Main Control System
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  3.2.6 Customer Distribution Point
  Usually the Customer Distribution Point is located at one of the outlets of an Airnet . Note 2 to entry: The Customer Distribution Point provides Variables and/or Objects which describe
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  3.2.15 Requirements [of an Airnet]
  Requirements [of an Airnet] The actual requirements of an Airnet are not specified in this specification. The following examples of Requirements do not imply the actual requirements of an Airnet ... EXAMPLE 1 The Airnet pressure shall be within range. EXAMPLE 2 The dew point shall be within range. EXAMPLE 3 The volume flow rate shall be within range
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  5.1 Device Identification
  System . All browsable Components shall be identifiable. This includes non-communicating Components (e.g. Airnet , receiver) as well as assets capable of communication (e.g. compressor
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  6.3 Airnet Examples
  Airnet Examples Figure 8 shows a simple model of an Airnet . The inlet of the Airnet is the sum of the inlets of compressors C1 and C2. The outlet ... Airnet is the Customer Distribution Point . All CASParts that are inside the red box are connected to the red Airnet and treated as such. The Main Control System
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.1 CASType ObjectType Definition
  Components Object , just like the CompressedAirSystem Object . For each DeviceClass connected to an Airnet , there is one ComponentGroup Object in the Components Object of that Airnet . Connected Components are referenced
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.4 AirnetType ObjectType Definition
  AirnetType ObjectType DefinitionThe AirnetType is the representation of an Airnet and provides both Objects for Quantities and FunctionalGroups . It is illustrated in Figure 19 and formally defined in Table ... optional Object Ambient provides Quantities for the ambient air conditions at an Airnet . Of the optional Variables of the FluidQuantitiesType only AbsolutePressure, DewPoint, RelativeHumidity, and Temperature are available. The optional
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.7 CASComponentType ObjectType Definition
  HasComponent Object 2:Identification 4:MachineryItemIdentificationType M The optional Property ActiveAirnet indicates which Airnet is currently using this Component . The Property shall only be instantiated if the Component is connected ... more than one Airnet . The optional Object Ambient provides Quantities for the ambient air conditions at a Component . Of the optional Variables of the FluidQuantitiesType only AbsolutePressure, DewPoint, RelativeHumidity
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.26 AnalysesType ObjectType Definition
  defined in Table 56 . Such analyses may be performed on Compressed Air System or Airnet level. Table 56 - AnalysesType Definition Attribute Value BrowseName AnalysesType IsAbstract False References Node Class BrowseName
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.30 AirnetConfigurationType ObjectType Definition
  AirnetConfigurationType ObjectType Definition The AirnetConfigurationType provides Variables for configuring the behavior of an Airnet and is formally defined in Table 62 . Table 62 - AirnetConfigurationType Definition Attribute Value BrowseName AirnetConfigurationType IsAbstract ... optional Variable OperatingModes provides manufacturer or system specific operating modes of an Airnet . When instantiating the AirnetConfigurationType, the manufacturer or system integrator shall add specific operating modes to the EnumStrings
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.45 OperationalType ObjectType Definition
  describes whether the Main Function of a Component or the Requirements of an Airnet can be fulfilled. The states may be influenced by the events and condition instances ... describes whether the Main Function of a Component or the Requirements of an Airnet should be fulfilled. Some subtypes of this OperationalType define more specific states and provide a more
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.46 AirnetOperationalType ObjectType Definition
  AirnetOperationalType ObjectType Definition The AirnetOperationalType extends its supertype by Airnet specific Variables and is formally defined in Table 97 . Table 97 - AirnetOperationalType Definition Attribute Value BrowseName AirnetOperationalType IsAbstract False References ... HasComponent Variable OperatingState AirnetOperatingStateEnum 0:DataItemType O, RO Three KPIs were defined for an Airnet . Each of these KPIs is derived from ISO 11011 and is described below. The KPIs
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  9.2.2.2 CAS Base Analyses Server Facet
  Control System that provides prefabricated or pre-parameterized analyses on Compressed Air System or Airnet level. Although both Conformance Units are listed as optional, at least one shall be implemented
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  9.2.2.3 CAS Advanced Analyses Server Facet
  Main Control System that provides parameterizable analyses on Compressed Air System or Airnet level and the possibility to store analysis reports in the AddressSpace. Table 165 - CAS Advanced Analyses Server
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  B.2 Adding or Removing a Component to/from an Airnet
  Adding or Removing a Component to/from an Airnet During the life of a Compressed Air System the manufacturer, integrator, or operator may wish to add or remove Components ... from one of the Airnets . This also includes moving a Component permanently from one Airnet to another. The OPC UA provided Services AddReferences and DeleteReferences can add or remove References
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  B.3 Temporarily Switch a Component from one Airnet to Another
  Temporarily Switch a Component from one Airnet to Another Some Main Control Systems allow for Components to switch from one Airnet to another by operating a valve or a similar ... valve or a similar action switches one of these Components from one Airnet to another, the ActiveAirnet Property changes its Value Attribute to indicate which Airnet is currently using