OPC 40082-1: OPC UA interfaces for plastics and rubber machinery – Peripheral devices

Part 1: Temperature control devices

Release 1.01
2020-06-01

Copyright (c) 2021 OPC Foundation
Generated on 7/23/2021 10:22:45 PM.

This document is subject to the license terms described here.

This document is a copy of the original which can be found here.

Table of Contents

1 Scope

2 Normative references

3 Terms, definitions and conventions
    3.1 Overview
    3.2 Conventions used in this document
    3.3 Abbreviations

4 General information to OPC UA interfaces for plastics and rubber machinery and OPC UA

5 Use cases

6 TCD_InterfaceType
    6.1 TCD_InterfaceType Definition
    6.2 DisplayLanguage

7 Identification

8 TCDSpecificationType
    8.1 MaxTemperature
    8.2 PowerValue
    8.3 ConnectedLoad
    8.4 NominalFlowRate
    8.5 CoolingCapacity
    8.6 DeviceZoneId

9 OperationType
    9.1 DeviceMappingNumber
    9.2 HighestActiveAlarmSeverity
    9.3 ActiveErrors
    9.4 ResetAllErrors
    9.5 ResetErrorById
    9.6 OperatingMode
    9.7 HoursOfOperation
    9.8 IdentifyDevice
    9.9 SwitchOn
    9.10 SwitchOff
    9.11 ReduceToStandByOn
    9.12 ReduceToStandByOff

10 DeviceZoneType
    10.1 Temperature
    10.2 InternalMeasuringPoint
    10.3 StandbyTemperature
    10.4 SwitchingOffTemperature
    10.5 TemperatureLimitation
    10.6 TemperatureMainLine
    10.7 TemperatureReturnLine
    10.8 TemperatureDifference
    10.9 FlowRate
    10.10 PressureMainLine
    10.11 PressureReturnLine
    10.12 PressureDifference
    10.13 ActualProcessPower
    10.14 ActualRegulationRatio
    10.15 DelayTimeAfterCooling
    10.16 PumpSpeed
    10.17 ActualPumpSpeedRPM
    10.18 ActualPumpPower
    10.19 PumpControlMode
    10.20 ExternalSensorType
        10.20.1 ActualValue
        10.20.2 Used
        10.20.3 ExternalSensorModeOn
        10.20.4 ExternalSensorModeOff
        10.20.5 ThermocoupleType and CommunicationProtocolType
        10.20.6 AutomaticModeSwitch
        10.20.7 ClosedLoopControl
    10.21 LeakStopperType
        10.21.1 On
        10.21.2 Off
    10.22 MouldEvacuationType
        10.22.1 On
        10.22.2 Off
        10.22.3 TemperatureLimit
        10.22.4 Time
        10.22.5 Sink
        10.22.6 Mode
    10.23 MaintenanceInformationType
    10.24 ExternalChannelsType
    10.25 ExternalChannelType
        10.25.1 SwitchOn
        10.25.2 SwitchOff
        10.25.3 SwitchedOn
        10.25.4 Temperature
        10.25.5 TemperatureMainLine
        10.25.6 TemperatureReturnLine
        10.25.7 TemperatureDifference
        10.25.8 FlowRate
        10.25.9 PressureMainLine
        10.25.10 PressureReturnLine
        10.25.11 PressureDifference
        10.25.12 ControlMode

11 Alarms

12 Profiles and Conformance Units

13 Namespaces
    13.1 Namespace Metadata
    13.2 Handling of OPC UA Namespaces

Annex A (normative) OPC 40082-1 Namespace and mappings