MouldEvacuationType is an optional component of DeviceZoneType and includes parameters and nodes for mould evacuation.

Table 14 – MouldEvacuationType Definition

Attribute

Value

BrowseName

MouldEvacuationType

IsAbstract

False

References

Node Class

BrowseName

DataType

TypeDefinition

Other

Subtype of 0:BaseObjectType defined in OPC UA Part 5

0:HasComponent

Method

On

M

0:HasComponent

Method

Off

M

0:HasComponent

Variable

TemperatureLimit

0:Double

0:AnalogItemType

O, RW

0:HasComponent

Variable

Time

0:Double

0:AnalogItemType

O, RW

0:HasComponent

Variable

Sink

0:UInt16

0:MultiStateValueDiscreteType

O, RW

0:HasComponent

Variable

Mode

0:UInt16

0:MultiStateValueDiscreteType

O, RW

Description:Activate evacuation mode

Signature

On ();

Description:Deactivate evacuation mode

Signature

Off ();

Description:Temperature Limitation of the mould evacuation. TCD is cooled to this temperature first if necessary.

Unit: °C or °F

Example: 70

Description:Duration of the mould evacuation.

Unit: s

Example: 45

Description:Defines where the medium is to be emptied

The TypeDefinition is MultiStateValueDiscreteType, so the Properties EnumValues and ValueAsText must be filled with the supported values out of Table 15.

Table 15 – Values for Sink

EnumValue

ValueAsText

Description

0

DRAIN

medium is passed into the cooling or system water outlet

1

TANK

medium is conducted in a separate outlet

Description:Defines how the medium is to be emptied.

The TypeDefinition is MultiStateValueDiscreteType, so the Properties EnumValues and ValueAsText must be filled with the supported values out of Table 16.

Table 16 – Values for Mode

EnumValue

ValueAsText

Description

0

PUMP

Evacuation by the pump

1

COMPRESSED_AIR

Evacuation with compressed air