Search

Scope: Core (OPC-10000-*) All specs

7 result(s) for UpdateBehavior

OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

8.5.2 UpdateBehavior OptionSet

UpdateBehavior OptionSet The UpdateBehavior OptionSet is based on UInt32. It describes how the device can perform the update. All possible options are described in Table 114 . All other values ... reserved for future versions of this specification. The OptionSet is used in the UpdateBehavior Property of the DirectLoadingType ( 8.4.4.3 ) and in the GetUpdateBehavior Methods on the CachedLoadingType
OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

8.2.2.5 Partial update without stopping the software

depends on the concrete update file. To support this, the Client can read the UpdateBehavior ( 8.5.2 ) to determine if stopping is required
OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

8.3.4.10 Power cycle option

instance of the SoftwareUpdateType supports the power cycle option, the UpdateBehavior RequiresPowerCycle shall indicate if this can happen for an installation. This power cycle state machine is used in combination
OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

8.3.8 Update Behavior

software that is to be installed. Therfore the server provides the UpdateBehavior OptionSet (see 8.5.2 ). The UpdateBehavior can be determined with the UpdateBehavior Variable (see 8.4.4.3 ) of the DirectLoadingType
OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

8.4.3.3.1 General

This result code is only used with DirectLoading . f the PrepareForUpdate is available, the UpdateBehavior requires preparation and the PrepareForUpdate state machine is not in the state PreparedForUpdate . Bad_NotFound
OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

8.4.4.3 UpdateBehavior

UpdateBehavior The UpdateBehavior OptionSet informs the update Client about the specific behavior of the component during update via Direct-Loading
OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

8.4.8.1 Overview

Server implements this state machine, a Client shall use it except if the UpdateBehavior indicates that this is not necessary for the transferred software. If preparation is required, the installation