Search

Scope: Core (OPC-10000-*) All specs

19 result(s) for Stop

OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control

6.2.1.1 Overview

before the planned amount of the job order is produced. In both cases, the Stop Method is called to end the execution of the job order. This can either
OPC-30020 – MDIS OPC UA Companion Specification

6.11.3 MDISMotorObjectType Definition

Boolean InterlockVariableType OP, RO 0:HasComponent Method Start See 6.11.4 O 0:HasComponent Method Stop See 6.11.5 O 0:HasComponent Method SetOperation See 6.11.6 O ConformanceUnits MDIS Motor Base Running ... modes: Auto , Manual and Off . In Auto operation the process sends the Start and Stop command automatically (not from an Operator). In Manual operation the Start and Stop process
OPC-30020 – MDIS OPC UA Companion Specification

14.2.2 Server

this includes the SetOperation Method . Server MDIS Motor Start/Stop Supports the optional Start and Stop Methods of the MDISMotorObjectType, this includes supporting Manual Operation . Server MDIS Motor DefeatableStartInterlock Supports ... FlowRate , TargetFlowRate, Position, TargetPosition and Moving variable, as well as the SetFlowRate , SetPosition and Stop methods. Server MDIS CIMV TotalFlow Supports the TotalFlow variable and the ResetTotalFlow method Server MDIS
OPC-30020 – MDIS OPC UA Companion Specification

14.2.3 Client

including the SetOperation Method . Client MDIS Motor Client Start/Stop Makes use of the Start / Stop Method aspects of the MDISMotorObjectType Client MDIS Motor Client DefeatableStartInterlock Makes use of the optional ... FlowRate, TargetFlowRate, Position, TargetPosition and Moving variable, as well as the SetFlowRate, SetPosition and Stop methods. Client MDIS CIMV Client TotalFlow Makes use of the TotalFlow variable and the ResetTotalFlow
OPC-30050 – OPC UA for PackML - Common Object Model: PackML

6.3.7 PackMLMachineStateMachineType

HasComponent Object ClearingToStopped TransitionType HasComponent Object StoppedToRunning TransitionType HasComponent Object RunningToStopping TransitionType HasComponent Method Stop Defined in 6.7.7 Optional HasComponent Method Reset Defined in 6.7.8 Optional The AvailableTransitions and AvailableStates ... Stopping - This state executes the logic which brings the machine to a controlled stop as reflected by the STOPPED state. The value of this StateType is 7. Clearing - Initiated
OPC-30050 – OPC UA for PackML - Common Object Model: PackML

6.7.7 Stop Method

Stop Method This Method is used as part of the PackMLMachineStateMachineType . It allows an OPC UA Client to change the state of this state machine to the Stopping state. Signature ... Stop( ); Method result codes are defined in Table 36 Table 36 - Stop Method result codes Result Code Description Bad_MethodInvalid See OPC 10000-4 - Services for the description of this
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics

7.1.5.1 Overview

HasComponent Object RunningToAborting TransitionType 0:HasComponent Object RunningToStopping TransitionType 0:HasComponent Method Stop O 0:HasComponent Object Stopped InitialStateType 0:HasComponent Object StoppedToRunning TransitionType 0:HasComponent Object Stopping StateType ... unit/device fault. The aborting logic will bring the unit/device to a rapid safe stop. Operation of the emergency stop will cause the unit/device to be tripped by its safety system
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics

7.1.5.4 Stop

Stop The Stop Method allows an OPC UA Client to change the state of this state machine to the Stopping state. The signature of this Method is specified below. Table ... specifies the Arguments and AddressSpace representation. Signature Stop () Table 31 - Stop Method AddressSpace Definition Attribute Value BrowseName Stop References Node Class BrowseName DataType TypeDefinition ModellingRule
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics

7.1.10.4 StopTask

Comment to document the outcome of the maintenance task. Upon successful execution of the Stop Method , the MaintenanceState shall be changed to Finished and an accompanying event shall be raised
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration

7.10.2 Stop Method

Stop Method The signature of this Method is specified below. Signature Stop ( [in] 0:Int64 StopMode [out] 0:Int32 Status ); The Stop Method is called by a Client to stop ... execution of the entity which is represented by the state machine. Table 39 - Stop Method Arguments Argument Description StopMode provides a way to differentiate between different stop modes. This parameter
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration

7.16.8 Stop Method

Stop Method The signature of this Method is specified below. Signature Stop ( [in] 0:Int64 StopMode [out] 0:Int32 Status ); Table 89 specifies the Arguments . Table 89 - StopMethod Arguments Argument ... errors. >0 - are reserved for errors defined by this and future standards The Stop Method allows an authorized Client to command the task control to stop executing and leave
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management

8.3.2.3 Continuous operation

Ready state, automatically due to internal conditions, or by calling the Abort or Stop methods
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management

8.3.2.4 General remarks on Stop and Abort methods

General remarks on Stop and Abort methods The Stop and Abort methods offer two different means of finishing operation in the "Executing" states, with the intention that ... fast as possible, without regard to acquired or computed data. In response to a Stop method call, the system is expected to end running operation and transition to the Ready
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management

8.3.5.1 Introduction

processes data, until it is stopped by internal or external reasons, e.g. calling the Stop or Abort methods on the server
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management

8.3.5.4 SingleExecution State

acquisition or evaluation and/or producing a result. Into the Ready state by the methods Stop and Abort , see Section 8.3.2.4 for details. Into the Preoperational state of the VisionStateMachine
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management

8.3.5.5 ContinuousExecution State

This state can be left in the following ways: Into the Ready state by Stop and Abort method calls, see Section 8.3.2.4 for details. Into the Preoperational state
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management

8.3.7.3 Abort method

possible, without regard to acquired or computed data. See the general remarks on Stop and Abort methods in Section 8.3.2.4 for further information on the behavior. Signature Abort ([in] Int32
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management

8.3.7.4 Stop method

Stop method In response to a Stop method call on the server, the vision system is expected to end running operation and transition to state Ready as soon as possible ... while retaining as much result data as possible. See the general remarks on Stop and Abort in 8.3.2.4 for further information on the behavior. Signature Stop ([in] Int32 cause
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management

8.4.1.4 Leaving the superior state

left due to internal causes (like error conditions) or external causes (like the Stop , Abort , Halt , Reset method calls). In that case, the SubStateMachine becomes inactive and will