UA for Powertrain - 7.11 PtCommonAssetAttributesType ObjectType Definition

7.11 PtCommonAssetAttributesType ObjectType Definition

The PtCommonAssetAttributesType provides asset attributes that are common and can be applied to the specific asset types and is formally defined in Table 127. All specified attributes (e.g., PtAmbientAttributes) and their properties (e.g., TemperatureRange) refer to the operating environment and not the storage.

Table 127 – PtCommonAssetAttributesType Definition

Attribute	Value
BrowseName	PtCommonAssetAttributesType
IsAbstract	True
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtAssetAttributesType defined in chapter 7.7


0:HasSubtype	ObjectType	PtAmbientAttributesType	Defined in chapter 7.11.2
0:HasSubtype	ObjectType	PtAnalogInputElectricalAttributesType	Defined in chapter 7.11.3
0:HasSubtype	ObjectType	PtAnalogOutputElectricalAttributesType	Defined in chapter 7.11.4
0:HasSubtype	ObjectType	PtAuxiliarySupplyAttributesType	Defined in chapter 7.11.5
0:HasSubtype	ObjectType	PtCertificateAttributesType	Defined in chapter 7.11.6
0:HasSubtype	ObjectType	PtCommunicationInterfaceAttributesType	Defined in chapter 7.11.7
0:HasSubtype	ObjectType	PtCoolingAttributesType	Defined in chapter 7.11.8
0:HasSubtype	ObjectType	PtHardwareAttributesType	Defined in chapter 7.11.9
0:HasSubtype	ObjectType	PtDigitalInputElectricalAttributesType	Defined in chapter 7.11.10
0:HasSubtype	ObjectType	PtDigitalOutputElectricalAttributesType	Defined in chapter 7.11.11
0:HasSubtype	ObjectType	PtFuseAttributesType	Defined in chapter 7.11.12
0:HasSubtype	ObjectType	PtInputInterfaceAttributesType	Defined in chapter 7.11.13
0:HasSubtype	ObjectType	PtOutputInterfaceAttributesType	Defined in chapter 7.11.14
0:HasSubtype	ObjectType	PtMechanicalStrengthAttributesType	Defined in chapter 7.11.15
0:HasSubtype	ObjectType	PtProtectionClassAttributesType	Defined in chapter 7.11.16
0:HasSubtype	ObjectType	PtFunctionalSafetyAttributesType	Defined in chapter 7.11.17
0:HasSubtype	ObjectType	PtSafetyFunctionsAttributesType	Defined in chapter 7.11.18
0:HasSubtype	ObjectType	PtStandardAttributesType	Defined in chapter 7.11.19
Conformance Units
Powertrain Attributes Information

The InstanceDeclarations of the subtypes of PtCommonAssetAttributesType have a value for the DefaultInstanceBrowseName defined in Table 128. The DefaultInstanceBrowseName value defines the default BrowseName for instances of the type. According to the OPC 10000-3 – “AddIn model” the property DefaultInstanceBrowseName is only needed on type level.

Table 128 – PtCommonAssetAttributesType Attribute values for child Nodes

BrowsePath

Value Attribute

PtAmbientAttributesType

0:DefaultInstanceBrowseName

PtAmbientAttributes

PtAnalogInputElectricalAttributesType

0:DefaultInstanceBrowseName

PtAnalogInputElectricalAttributes

PtAnalogOutputElectricalAttributesType

0:DefaultInstanceBrowseName

PtAnalogOutputElectricalAttributes

PtAuxiliarySupplyAttributesType

0:DefaultInstanceBrowseName

PtAuxiliarySupplyAttributes

PtCertificateAttributesType

0:DefaultInstanceBrowseName

PtCertificateAttributes

PtCommunicationInterfaceAttributesType

0:DefaultInstanceBrowseName

PtCommunicationInterfaceAttributes

PtCoolingAttributesType

0:DefaultInstanceBrowseName

PtCoolingAttributes

PtHardwareAttributesType

0:DefaultInstanceBrowseName

PtHardwareAttributes

PtDigitalInputElectricalAttributesType

0:DefaultInstanceBrowseName

PtDigitalInputElectricalAttributes

PtDigitalOutputElectricalAttributesType

0:DefaultInstanceBrowseName

PtDigitalOutputElectricalAttributes

PtFuseAttributesType

0:DefaultInstanceBrowseName

PtFuseAttributes

PtInputInterfaceAttributesType

0:DefaultInstanceBrowseName

PtInputInterfaceAttributes

PtOutputInterfaceAttributesType

0:DefaultInstanceBrowseName

PtOutputInterfaceAttributes

PtMechanicalStrengthAttributesType

0:DefaultInstanceBrowseName

PtMechanicalStrengthAttributes

PtProtectionClassAttributesType

0:DefaultInstanceBrowseName

PtProtectionClassAttributes

PtFunctionalSafetyAttributesType

0:DefaultInstanceBrowseName

PtFunctionalSafetyAttributes

PtSafetyFunctionsAttributesType

0:DefaultInstanceBrowseName

PtSafetyFunctionsAttributes

PtStandardAttributesType

0:DefaultInstanceBrowseName

PtStandardAttributes

7.11.2 PtAmbientAttributesType ObjectType Definition

7.11.2.1 Overview

The PtAmbientAttributesType provides related ambient conditions in which the equipment is guaranteed to function and is formally defined in Table 129.

Table 129 – PtAmbientAttributesType Definition

Attribute	Value
BrowseName	PtAmbientAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.5.1
0:HasComponent	Variable	TemperatureMin	0:Float	0:AnalogUnitType	M, RO
0:HasComponent	Variable	TemperatureMax	0:Float	0:AnalogUnitType	M, RO
0:HasComponent	Variable	HumidityMin	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	HumidityMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	PressureMin	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	PressureMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	AltitudeMax	0:Float	0:AnalogUnitType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.2.2 Object Description

TemperatureMin provides the supported minimum temperature value of an asset. The unit shall be celsius [°C].

TemperatureMax provides the supported maximum temperature value of an asset. The unit shall be celsius [°C] without derating.

HumidityMin provides supported minimum humidity value of an asset without condensation conforming to IEC 61800-5-1. The unit shall be percent [%].

HumidityMax provides supported maximum humidity value of an asset without condensation conforming to IEC 61800-5-1. The unit shall be percent [%].

PressureMin indicates the minimum pressure value for which the asset is designed. The unit shall be pascal [PA].

PressureMax indicates the maximum pressure value for which the asset is designed. The unit shall be pascal [PA].

AltitudeMax indicates the maximum altitude value above sea level for which the asset is designed. The unit shall be meter [m] without derating.

7.11.3 PtAnalogInputElectricalAttributesType ObjectType Definition

7.11.3.1 Overview

The PtAnalogInputElectricalAttributesType provides the asset attributes describing the type of digital input and is formally defined in Table 130.

Table 130 – PtAnalogInputElectricalAttributesType Definition

Attribute	Value
BrowseName	PtAnalogInputElectricalAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasProperty	Variable	GalvanicIsolationSupported	0:Boolean	0:PropertyType	O, RO
0:HasComponent	Variable	AnalogInputElectricalType	0:UInt16	0:MultiStateValueDiscreteType	O, RO
0:HasComponent	Variable	InputVoltageRange	0:Range	0:BaseDataVariableType	O, RO
0:HasComponent	Variable	InputCurrentRange	0:Range	0:BaseDataVariableType	O, RO
0:HasProperty	Variable	NumberOfChannels	0:UInt16	0:PropertyType	O, RO
0:HasProperty	Variable	Resolution	0:Int32	0:PropertyType	O, RO
0:HasComponent	Variable	InternalResistance	0:Float	0:AnalogUnitType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.3.2 Object Description

GalvanicIsolationSupported provides the galvanic isolation of an asset.

AnalogInputElectricalType defines the analog input properties including the rated voltage range and/or rated current range. The values of the MultiStateValueDiscreteType variable are defined in Table 131 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.

Table 131 – PtAnalogInputElectricalAttributesType Attribute values for child Nodes

BrowsePath

Value Attribute

Description Attribute

AnalogInputElectricalType

0:EnumValues

[ { "Value": 0, "DisplayName": "VOLTAGE_0-10V", "Description": "Voltage range 0-10 volt" }, { "Value": 1, "DisplayName": "VOLTAGE_-10-10V", "Description": "Voltage range -10-10 volt" }, { "Value": 2, "DisplayName": "CURRENT_0-20MA", "Description": "Current range 0-20 milliampere" }, { "Value": 3, "DisplayName": "CURRENT_4-20MA", "Description": "Current range 4-20 milliampere" }, { "Value": 4, "DisplayName": "TEMPERATURE_PT1000", "Description": "PT1000 temperature sensor" }, { "Value": 5, "DisplayName": "TEMPERATURE_PT100", "Description": "PT100 temperature sensor" }, { "Value": 6, "DisplayName": "TEMPERATURE_KTY", "Description": "KTY temperature sensor" }, { "Value": 7, "DisplayName": "TEMPERATURE_KTY84", "Description": "KTY84 temperature sensor" }, { "Value": 8, "DisplayName": "TEMPERATURE_PTC", "Description": "PTC temperature sensor" }, { "Value": 9, "DisplayName": "VOLTAGE", "Description": "Other voltage interface" }, { "Value": 10, "DisplayName": "CURRENT", "Description": "Other current interface" }, { "Value": 11, "DisplayName": "TEMPERATURE", "Description": "Other temperature interface" }, { "Value": 12, "DisplayName": "CONFIGURABLE", "Description": "Configurable" } ]

InputVoltageRange provides the range of the input voltage. Preferably this information should be described by means of the AnalogInputElectricalTyp. InputVoltageRange can be used if the MultiStateValueDiscreteType is not applicable. The unit shall be volt [V].

InputCurrentRange provides the range of the input current. Preferably this information should be described by means of the AnalogInputElectricalType. InputCurrentRange can be used if the MultiStateValueDiscreteType is not applicable. The unit shall be ampere [A].

NumberOfChannels provides the number of channels of the analog input representation.

Resolution provides a number of bits (possibly adding the sign bit) for the analog input representation.

InternalResistance provides the size of the internal load resistor. The unit shall be ohm [Ω].

7.11.4 PtAnalogOutputElectricalAttributesType ObjectType Definition

7.11.4.1 Overview

The PtAnalogOutputElectricalAttributesType provides analog output asset attributes and is formally defined in Table 132.

Table 132 – PtAnalogOutputElectricalAttributesType Definition

Attribute	Value
BrowseName	PtAnalogOutputElectricalAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasComponent	Variable	AnalogOutputElectricalType	0:UInt16	0:MultiStateValueDiscreteType	O, RO
0:HasProperty	Variable	NumberOfChannels	0:UInt16	0:PropertyType	O, RO
0:HasComponent	Variable	LoadResistance	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	FrequencyRange	0:Range	0:BaseDataVariableType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.4.2 Object Description

AnalogOutputElectricalType provides the used analog output(s). The values of the MultiStateValueDiscreteType variable are defined in Table 133 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.

Table 133 – PtAnalogOutputElectricalAttributesType Attribute values for child Nodes

BrowsePath

Value Attribute

Description Attribute

AnalogOutputElectricalType

0:EnumValues

NumberOfChannels provides the number of channels of the analog output representation.

LoadResistance provides the minimum value of the load resistance. The unit shall be ohm [Ω].

FrequencyRange provides the range of frequencies usable for the analog output. The unit shall be hertz [Hz].

The attributes of the PtAnalogOutputElectricalAttributesType have additional subattributes which are defined in Table 134.

Table 134 – PtAnalogOutputElectricalAttributesType additional subattributes

BrowsePath	References	NodeClass	BrowseName	DataType	TypeDefinition	Others
FrequencyRange	0:HasProperty	Variable	0:EngineeringUnits	EUInformation	0:PropertyType	M

7.11.5 PtAuxiliarySupplyAttributesType ObjectType Definition

7.11.5.1 Overview

The PtAuxiliarySupplyAttributesType provides the asset attributes describing the electrical data for control electronics and is formally defined in Table 135.

Table 135 – PtAuxiliarySupplyAttributesType Definition

Attribute	Value
BrowseName	PtAuxiliarySupplyAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasComponent	Variable	SupplyVoltageDc	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	SupplyVoltageAc	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	CurrentMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	FuseProtectionCurrentMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	PowerConsumptionMax	0:Float	0:AnalogUnitType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.5.2 Object Description

SupplyVoltageDc provides the external supply voltage DC for the information electronics. The unit shall be volt [V].

SupplyVoltageAc provides the external supply voltage AC for the information electronics. The unit shall be volt [V].

CurrentMax provides the maximum input current which may occur for the rated input voltage. The unit shall be ampere [A].

FuseProtectionCurrentMax provides the information to the maximum fuse protection. The unit shall be ampere [A].

PowerConsumptionMax provides the information to the maximum power loss of the asset. The unit shall be watt [W].

7.11.6 PtCertificateAttributesType ObjectType Definition

7.11.6.1 Overview

The PtCertificateAttributesType provides the list of all supported certificates and is formally defined in Table 136.

Table 136 – PtCertificateAttributesType Definition

Attribute	Value
BrowseName	PtCertificateAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasProperty	Variable	Certificates	0:String[]	0:PropertyType	O, RO

Conformance Units
Powertrain Attributes Information

7.11.6.2 Object Description

Certificates provides all supported certificates of a powertrain asset. Examples are:

CE – Conformité Européenne
UL – Underwriters Laboratories
DoE – Department of Energy
CCC – China Compulsory Certificate
CEL – China Energy Label
UKCA – UK Conformity Assessment
ISI – Indian Standard Institute

7.11.7 PtCommunicationInterfaceAttributesType ObjectType Definition

7.11.7.1 Overview

The PtCommunicationInterfaceAttributesType provides information about a communication interface and is formally defined in Table 137.

Table 137 – PtCommunicationInterfaceAttributesType Definition

Attribute	Value
BrowseName	PtCommunicationInterfaceAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasComponent	Variable	ProtocolTypes	0:UInt16[]	0:MultiStateValueDiscreteType	M, RO
0:HasComponent	Variable	ProfileTypes	0:UInt16[]	0:MultiStateValueDiscreteType	O, RO
0:HasComponent	Variable	SafetyProtocolTypes	0:UInt16[]	0:MultiStateValueDiscreteType	O, RO
0:HasProperty	Variable	CommunicationSpeed	0:String	0:PropertyType	O, RO
0:HasProperty	Variable	NumberOfPorts	0:UInt16	0:PropertyType	O, RO

Conformance Units
Powertrain Attributes Information

7.11.7.2 Object Description

ProtocolTypes provides the information to the supported communication features, fieldbus interface or protocols. The values of the MultiStateValueDiscreteType variable are defined in Table 138 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.

Table 138 – PtCommunicationInterfaceAttributesType Attribute values for child Nodes

BrowsePath

Value Attribute

Description Attribute

ProtocolTypes

0:EnumValues

[ { "Value": 0, "DisplayName": "ETHERCAT", "Description": "Ethernet for control automation technology for real-time systems" }, { "Value": 1, "DisplayName": "PROFINET", "Description": "Process field network for real-time systems" }, { "Value": 2, "DisplayName": "PROFINET_RT", "Description": "PROFINET class A, class B realtime communication" }, { "Value": 3, "DisplayName": "PROFINET_IRT", "Description": "PROFINET class C isochronous realtime communication" }, { "Value": 4, "DisplayName": "ETHERNET_IP", "Description": "Ethernet Industrial Protocol for real time system" }, { "Value": 5, "DisplayName": "PROFIBUS", "Description": "Process field bus" }, { "Value": 6, "DisplayName": "PROFIBUS_DP", "Description": "Process field bus distributed peripherals" }, { "Value": 7, "DisplayName": "PROFIBUS_PA", "Description": "Process field bus process automation" }, { "Value": 8, "DisplayName": "SERCOS", "Description": "Serial realtime communication system" }, { "Value": 9, "DisplayName": "SERCOS_III_SERCOS_II", "Description": "Serial realtime communication system III / II" }, { "Value": 10, "DisplayName": "CC_LINK", "Description": "Control & communications fieldbus" }, { "Value": 11, "DisplayName": "CANOPEN", "Description": "Control area network – open communications protocol" }, { "Value": 12, "DisplayName": "IO_LINK", "Description": "Simple communications protocol, short distances, bi-directional, digital and point-to-point" }, { "Value": 13, "DisplayName": "MODBUS", "Description": "Communications protocol over serial lines or via ethernet" }, { "Value": 14, "DisplayName": "MODBUS_TCP", "Description": "Modbus over TCP/IP" }, { "Value": 15, "DisplayName": "MODBUS_RTU", "Description": "Modbus over serial lines" }, { "Value": 16, "DisplayName": "DEVICENET", "Description": "DeviceNet - digital, multi-drop fieldbus protocol" }, { "Value": 17, "DisplayName": "POWERLINK", "Description": "Ethernet powerlink" }, { "Value": 18, "DisplayName": "OPC_UA", "Description": "OPC Unified Architecture" }, { "Value": 19, "DisplayName": "MQTT", "Description": "Message queuing telemetry transport (MQTT)" }, { "Value": 20, "DisplayName": "INTERBUS", "Description": "Interbus" }, { "Value": 21, "DisplayName": "AS-I", "Description": "AS-I" },

{ "Value": 22, "DisplayName": " CC_Link_IE_TSN", "Description": "CC-Link IE TSN" }, { "Value": 23, "DisplayName": " CC_Link_IE_FIELD", "Description": "CC-Link IE Field Network" },

{ "Value": 24, "DisplayName": " CC_Link_IE_FIELD_BASIC", "Description": "CC-Link IE Field Network Basic" }

]

ProfileTypes

0:EnumValues

[ { "Value": 0, "DisplayName": "CIA_402", "Description": "CANopen device profile for drives and motion control" }, { "Value": 1, "DisplayName": "PROFIDRIVE", "Description": "PROFIdrive is the modular, manufacturer-independent device profile for drive devices from Profibus & Profinet International" }, { "Value": 2, "DisplayName": "PROFIENERGY", "Description": "PROFIenergy is a profile for energy management in production plants" }, { "Value": 3, "DisplayName": "COE", "Description": "CANopen over EtherCAT" }, { "Value": 4, "DisplayName": "SOE", "Description": "Servo Drive Profile over EtherCAT" }, { "Value": 5, "DisplayName": "CIP_MOTION", "Description": "CIP motion technology provides application profiles that allow position, speed and torque loops to be set within a drive" }, { "Value": 6, "DisplayName": "SERCOS", "Description": "Serial Real-time Communication System" } ]

SafetyProtocolTypes

0:EnumValues

[ { "Value": 0, "DisplayName": "FF-SIS", "Description": "Fieldbus Foundation Safety Instrumented Systems" }, { "Value": 1, "DisplayName": "CIP_SAFTEY", "Description": "Common Industrial Protocol Safety" }, { "Value": 2, "DisplayName": "PROFISAFE", "Description": "Process field safety" }, { "Value": 3, "DisplayName": "INTERBUS_SAFETY", "Description": "INTERBUS Safety" }, { "Value": 4, "DisplayName": "CC-Link_SAFETY", "Description": "CC-Link Safety" }, { "Value": 5, "DisplayName": "FAIL_SAFE_OVER_ETHERCAT_", "Description": "FailSafe over EtherCAT (FSoE)" }, { "Value": 6, "DisplayName": "ETHERNET_POWERLINK_SAFTETY", "Description": "Ethernet POWERLINK Safety" }, { "Value": 7, "DisplayName": "EPASAFETY", "Description": "EPASafety" }, { "Value": 8, "DisplayName": "RAPIENET_SAFETY", "Description": "RAPIEnet Safety" }, { "Value": 9, "DisplayName": "SAFETYNET_P", "Description": "SafetyNET p" }, { "Value": 10, "DisplayName": "OPENSAFETY", "Description": "openSAFETY" } ]

The 0:EnumValues of the FieldbusProtocolCategoryEnumeration have additional CDD entries which are defined inTable 139.

Table 139 – SafetyProtocolTypes CDD Entries

EnumValue	CDD Entry
ETHERCAT	5:0112/2///62683#ACH652#001
PROFINET	5:0112/2///62683#ACH663#001
ETHERNET_IP	5:0112/2///62683#ACH654#001
PROFIBUS	5:0112/2///62683#ACH506#001
SERCOS	5:0112/2///62683#ACH666#001
CC_LINK	5:0112/2///62683#ACH649#001
CANOPEN	5:0112/2///62683#ACH505#001
MODBUS	5:0112/2///62683#ACH569#001
DEVICENET	5:0112/2///62683#ACH507#001
POWERLINK	5:0112/2///62683#ACH653#001
OPC_UA	5:0112/2///62683#ACH662#001
MQTT	5:0112/2///62683#ACH661#001
INTERBUS	5:0112/2///62683#ACH657#001
AS-I	5:0112/2///62683#ACH508#001

ProfileTypes provides the information to the supported profiles. The values of the MultiStateValueDiscreteType variable are defined in Table 138 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.

SafetyProtocolTypes provides the information to the supported functional safety protocol type. The values of the MultiStateValueDiscreteType variable are defined in Table 138 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.

CommunicationSpeed provides the maximum supported bandwidth of the communication interface. The unit shall be bits per second [bps].

NumberOfPorts provides the number of physical ports of the communication interface.

7.11.8 PtCoolingAttributesType ObjectType Definition

7.11.8.1 Overview

The PtCoolingAttributesType provides information about the cooling type of the equipment and is formally defined in Table 140.

Table 140 – PtCoolingAttributesType Definition

Attribute	Value
BrowseName	PtCoolingAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasComponent	Variable	CoolingMethod	0:UInt16	0:MultiStateValueDiscreteType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.8.2 Object Description

CoolingMethod provides the cooling method of an equipment. The values of the MultiStateValueDiscreteType variable are defined in Table 141 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.

Table 141 – PtCoolingAttributesType Attribute values for child Nodes

BrowsePath

Value Attribute

Description Attribute

CoolingMethod

0:EnumValues

[ { "Value": 0, "DisplayName": "AIR_COOLED_STATIC", "Description": "Cooled by just free ventilation openings" }, { "Value": 1, "DisplayName": "AIR_COOLED_FORCED", "Description": "Cooled using a fan" }, { "Value": 2, "DisplayName": "LIQUID_COOLED", "Description": "Cooled using liquid" } ]

7.11.9 PtHardwareAttributesType ObjectType Definition

7.11.9.1 Overview

The PtHardwareAttributesType provides the information to the physical values and dimensions of an asset and is formally defined in Table 142.

Table 142 – PtHardwareAttributesType Definition

Attribute	Value
BrowseName	PtHardwareAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasComponent	Variable	Length	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	Width	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	Height	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	Weight	0:Float	0:AnalogUnitType	O, RO
0:HasProperty	Variable	FrameSizeCoding	0:String[]	0:PropertyType	O, RO
0:HasComponent	Variable	NoiseLevel	Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	HeatDissipationPower	Float	0:AnalogUnitType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.9.2 Object Description

Length provides the physical length of an asset. The unit shall be millimeter [mm].

Width provides the physical width of an asset. The unit shall be millimeter [mm].

Height provides the physical height of an asset. The unit shall be millimeter [mm].

Weight provides the physical weight of an asset. The unit shall be kilogram [kg].

FrameSizeCoding provides the producer’s specific name for the enclosure size (e.g. motor size 56-400 [IEC 60072] or NEMA 56C [National Electrical Manufacturer's Association]).

NoiseLevel represents the maximum noise created by the asset. The unit shall be decibel [dB].

HeatDissipationPower represents the heat dissipation expected for the maximum load. The unit shall be kilowatts [kW].

7.11.10 PtDigitalInputElectricalAttributesType ObjectType Definition

7.11.10.1 Overview

The PtDigitalInputElectricalAttributesType provides the asset attributes describing the type of digital input and is formally defined in Table 143.

Table 143 – PtDigitalInputElectricalAttributesType Definition

Attribute	Value
BrowseName	PtDigitalInputElectricalAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasComponent	Variable	DigitalInputElectricalType	0:UInt16	0:MultiStateValueDiscreteType	O, RO
0:HasProperty	Variable	SafetyPropertySupported	0:Boolean	0:PropertyType	O, RO
0:HasProperty	Variable	NumberOfChannels	0:UInt16	0:PropertyType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.10.2 Object Description

DigitalInputElectricalType provides the used digital input(s). The values of the MultiStateValueDiscreteType variable are defined in Table 144 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.

Table 144 – PtDigitalInputElectricalAttributesType Attribute values for child Nodes

BrowsePath

Value Attribute

Description Attribute

DigitalInputElectricalType

0:EnumValues

[ { "Value": 1, "DisplayName": "TTL", "Description": "Transistor-transistor logic (0..5 V)" }, { "Value": 2, "DisplayName": "HTL", "Description": "High threshold logic (0..24 V)" }, { "Value": 3, "DisplayName": "PNP", "Description": "PNP transistor type" }, { "Value": 4, "DisplayName": "NPN", "Description": "NPN transistor type" }, { "Value": 5, "DisplayName": "CONFIGURABLE", "Description": "Configurable" }, { "Value": 6, "DisplayName": "PULSE_TRAIN", "Description": "Pulse train" }, { "Value": 7, "DisplayName": "RELAY", "Description": "Electromechanical relay" } ]

SafetyPropertySupported true if the digital input has a safety property.

NumberOfChannels provides the number of channels of the digital input.

7.11.11 PtDigitalOutputElectricalAttributesType ObjectType Definition

7.11.11.1 Overview

The PtDigitalOutputElectricalAttributesType provides asset attribute describing the type of digital output and is formally defined in Table 145.

Table 145 – PtDigitalOutputElectricalAttributesType Definition

Attribute	Value
BrowseName	PtDigitalOutputElectricalAttributesType
I89IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.5.1
0:HasComponent	Variable	DigitalOutputElectricalType	0:UInt16	0:MultiStateValueDiscreteType	O, RO
0:HasProperty	Variable	SafetyPropertySupported	Boolean	0:PropertyType	O, RO
0:HasComponent	Variable	OutputCurrentMax	0:Float	0:AnalogUnitType	O, RO
0:HasProperty	Variable	NumberOfChannels	0:UInt16	0:PropertyType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.11.2 Object Decription

DigitalOutputElectricalType provides the used digital output(s). The values of the MultiStateValueDiscreteType variable are defined in Table 146 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.

Table 146 – PtDigitalOutputElectricalAttributesType Attribute values for child Nodes

BrowsePath

Value Attribute

Description Attribute

DigitalOutputElectricalType

0:EnumValues

SafetyPropertySupported true if the digital output has a safety property.

OutputCurrentMax provides the information to the total output current limitation. The unit shall be ampere [A].

NumberOfChannels provides the number of channels of the digital output.

7.11.12 PtFuseAttributesType ObjectType Definition

7.11.12.1 Overview

The PtFuseAttributesType provides the asset attributes describing a fuse and is formally defined in Table 147.

Table 147 – PtFuseAttributesType Definition

Attribute	Value
BrowseName	PtFuseAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.5.1
0:HasProperty	Variable	FuseIdentificationType	0:String	0:PropertyType	O, RO
0:HasComponent	Variable	CurrentRated	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	VoltageRated	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	FuseElementSpeedMarking	0:UInt16	0:MultiStateValueDiscreteType	O, RO
0:HasComponent	Variable	BreakingCapacity	0:Float	0:AnalogUnitType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.12.2 Object Description

FuseIdentificationType provides the information regarding the type of the fuse (e.g. part number).

CurrentRated provides the current carrying capacity of a fuse. The unit shall be ampere [A].

VoltageRated provides the maximum open circuit voltage in which a fuse can be used, yet safely interrupt an overcurrent. The unit shall be volt [V].

FuseElementSpeedMarking provides the marking of the corresponding speed of a fuse. The values of the MultiStateValueDiscreteType variable are defined in Table 148 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.

Table 148 – PtFuseAttributesType Attribute values for child Nodes

BrowsePath

Value Attribute

Description Attribute

FuseElementSpeedMarking

0:EnumValues

[ { "Value": 0, "DisplayName": "FF", "Description": "Very fast acting" }, { "Value": 1, "DisplayName": "F", "Description": "Fast acting" }, { "Value": 2, "DisplayName": "M", "Description": "Medium acting" }, { "Value": 3, "DisplayName": "T", "Description": "Slow acting" }, { "Value": 4, "DisplayName": "TT", "Description": "Very slow acting" }, { "Value": 5, "DisplayName": "AR", "Description": "Partial-range breaking capacity (short-circuit protection only)" }, { "Value": 6, "DisplayName": "GR", "Description": "Full-range breaking capacity (overload and short-circuit protection)" }, { "Value": 7, "DisplayName": "GS", "Description": "Full-range breaking capacity (overload and short-circuit protection)" }, { "Value": 8, "DisplayName": "GRL", "Description": "Full-range breaking capacity (overload and short-circuit protection)" }, { "Value": 9, "DisplayName": "GG", "Description": "Full-range breaking capacity (overload and short-circuit protection) for general applications" }, { "Value": 10, "DisplayName": "GL", "Description": "Full-range breaking capacity (overload and short-circuit protection) for general applications" }, { "Value": 11, "DisplayName": "GF", "Description": "Full-range breaking capacity (overload and short-circuit protection) for general applications" }, { "Value": 12, "DisplayName": "AM", "Description": "Partial-range breaking capacity (short-circuit protection only) for the protection of motor circuits" }, { "Value": 13, "DisplayName": "GM", "Description": "Full-range breaking capacity (overload and short-circuit protection) for the protection of motor circuits" }, { "Value": 14, "DisplayName": "GPV", "Description": "Protection of solar photovoltaic arrays" }, { "Value": 15, "DisplayName": "GB", "Description": "Full-range breaking capacity (overload and short-circuit protection) robust for mining application" }, { "Value": 16, "DisplayName": "GTR", "Description": "Full-range breaking capacity (overload and short-circuit protection) for protection of transformers" }, { "Value": 17, "DisplayName": "GN", "Description": "North American general purpose for protection of conductors" }, { "Value": 18, "DisplayName": "GD", "Description": "North American general purpose, time delay" } ]

BreakingCapacity provides the maximum approved current which the fuse can safely interrupt at rated voltage. The unit shall be volt [V].

7.11.13 PtInputInterfaceAttributesType ObjectType Definition

7.11.13.1 Overview

The PtInputInterfaceAttributesType provides the generic set of asset attributes of an input interface of a device belonging to a powertrain, in terms of electrical measures ratings and maximal values. This attribute type is used for assets connected to the mains and for an electrical motor asset as an input interface description. The asset attributes describing the interface to the mains line – electric energy converter that changes single-phase or polyphase alternating electric currents to unidirectional direct electric current (non-regenerative) and optionally also direct electric current to single-phase or polyphase alternating electric currents (regenerative). The PtInputInterfaceAttributesType is formally defined in Table 149.

Table 149 – PtInputInterfaceAttributesType Definition

Attribute	Value
BrowseName	PtInputInterfaceAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.5.1
0:HasComponent	Variable	InputVoltageRated	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	InputVoltageMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	InputVoltageRange	0:Range	0:BaseDataVariableType	O, RO
0:HasComponent	Variable	InputFrequencyRangeRated	0:Range	0:BaseDataVariableType	O, RO
0:HasComponent	Variable	InputFrequencyMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	InputCurrentMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	InputCurrentRated	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	InputPowerMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	InputPowerRated	0:Float	0:AnalogUnitType	O, RO
0:HasProperty	Variable	NumberOfInputPhases	0:Byte	0:PropertyType	M, RO
Conformance Units
Powertrain Attributes Information

7.11.13.2 Object Description

InputVoltageRated provides the rated value of the voltage at the input interface. The unit shall be volt [V].

InputVoltageMax provides the maximum value of the voltage at the input interface. The unit shall be volt [V].

InputVoltageRange provides the value range of the voltage at the input interface. The unit shall be volt [V]

InputFrequencyRangeRated provides the rated value range of the frequency at the input interface. The unit shall be hertz [Hz].

InputFrequencyMax provides the maximum value of the frequency at the input interface. The unit shall be hertz [Hz].

InputCurrentMax provides the maximum value of the current at the input interface. The unit shall be ampere [A].

InputCurrentRated provides the rated value of the current at the input interface. The unit shall be ampere [A].

InputPowerMax provides the maximum value of the power at the input interface. The unit shall be watt [W].

InputPowerRated provides the value of the rated power at the input interface. The unit shall be watt [W].

NumberOfInputPhases contains the description of the number of phases.

7.11.14 PtOutputInterfaceAttributesType ObjectType Definition

7.11.14.1 Overview

The PtOutputInterfaceAttributesType provides the asset attributes specific to a general output interface of a device belonging to a powertrain in terms of electrical measures, ratings and maximal values and is formally defined in Table 150.

Table 150 – PtOutputInterfaceAttributesType Definition

Attribute	Value
BrowseName	PtOutputInterfaceAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.5.1
0:HasComponent	Variable	InputVoltageRated	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	InputCurrentRated	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	OutputVoltageMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	OutputVoltageRated	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	OutputVoltageRange	0:Range	0:BaseDataVariableType	O, RO
0:HasComponent	Variable	OutputFrequencyMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	OutputFrequencyRated	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	OutputCurrentMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	OutputCurrentRated	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	OutputPowerMax	0:Float	0:AnalogUnitType	O, RO
0:HasComponent	Variable	OutputPowerRated	0:Float	0:AnalogUnitType	O, RO
0:HasProperty	Variable	NumberOfOutputPhases	0:Byte	0:PropertyType	M, RO
Conformance Units
Powertrain Attributes Information

7.11.14.2 Object Description

InputVoltageRated provides the rated value of the input DC voltage of a stand-alone PtAssetOutputConverter. The unit shall be volt [V].

InputCurrentRated provides the rated value of the input DC current of a stand-alone PtAssetOutputConverter. The unit shall be ampere [A].

OutputVoltageMax provides the maximum value of the output voltage. The variable indicates the upper limit of the normal operating point. The unit shall be volt [V].

OutputVoltageRated provides the value of the rated output voltage. The unit shall be volt [V].

OutputVoltageRange provides the value range of the output voltage. The unit shall be volt [V].

OutputFrequencyMax provides the maximum value of the frequency. The unit shall be hertz [Hz].

OutputFrequencyRated provides the value of the rated frequency. The unit shall be hertz [Hz].

OutputCurrentMax provides the maximum value of the current. The unit shall be ampere [A].

OutputCurrentRated provides the value of the rated current. The unit shall be ampere [A].

OutputPowerMax provides the maximum value of the output power. The unit shall be watt [W].

OutputPowerRated provides the value of the rated current. The unit shall be watt [W].

NumberOfOutputPhases refers to the number of phases of the voltage which the output interface is capable of supporting.

7.11.15 PtMechanicalStrengthAttributesType ObjectType Definition

7.11.15.1 Overview

The PtMechanicalStrengthAttributesType provides asset attributes describing the mechanical strength during operation and is formally defined in Table 151.

Table 151 – PtMechanicalStrengthAttributesType Definition

Attribute	Value
BrowseName	PtMechanicalStrengthAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasProperty	Variable	Shock	0:String[]	0:PropertyType	O, RO
0:HasProperty	Variable	Vibration	0:String[]	0:PropertyType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.15.2 Object Desciption

Shock provides the information to the shock resistance properties. A considerable number of standards exist with regard to the assessment of machine shock. Example:

Shock resistance according to EN 60068-2-27: ≤ 100 g (981 m/s2)
IEC 60068-2-27:2008 - Half-sine of 15 or 5 g peak amplitude and a duration of 11 or 30 msec.

Vibration provides the information to the vibration severity. A considerable number of standards exist with regard to the assessment of machine vibrations; the following list does not claim to be exhaustive:

Vibration resistance according to EN 60068-2-6 at 5Hz – 2kHz: ≤ 10 g (98.1 m/s2)
DIN ISO 5348 - Mechanical vibration and shock - Mechanical mounting of accelerometers
DIN ISO 10816 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts
DIN ISO 7919-3 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts
DIN ISO 20816-1 - Mechanical vibration - Measurement and evaluation of machine vibration

7.11.16 PtProtectionClassAttributesType ObjectType Definition

7.11.16.1 Overview

The PtProtectionClassAttributesType provides the asset attributes describing the protection class and is formally defined in Table 152.

Table 152 – PtProtectionClassAttributesType Definition

Attribute	Value
BrowseName	PtProtectionClassAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasComponent	Variable	IpClass	0:UInt16	0:MultiStateValueDiscreteType	O, RO
0:HasProperty	Variable	ExClass	0:String	0:PropertyType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.16.2 Object Description

IpClass provides the degree of protection provided by the enclosure (according to DIN EN 60529). The values of the MultiStateValueDiscreteType variable are defined in Table 153 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.

Table 153 – PtProtectionClassAttributesType Attribute values for child Nodes

BrowsePath

Value Attribute

Description Attribute

IpClass

0:EnumValues

[ { "Value": 0, "DisplayName": "IP00", "Description": "non-protected / non-protected" }, { "Value": 1, "DisplayName": "IP01", "Description": "non-protected / vertically dripping" }, { "Value": 2, "DisplayName": "IP02", "Description": "non-protected / dripping (15° tilted)" }, { "Value": 3, "DisplayName": "IP10", "Description": "≥ 50 mm diameter / non-protected" }, { "Value": 4, "DisplayName": "IP11", "Description": "≥ 50 mm diameter / vertically dripping" }, { "Value": 5, "DisplayName": "IP12", "Description": "≥ 50 mm diameter / dripping (15° tilted)" }, { "Value": 6, "DisplayName": "IP20", "Description": "≥ 12,5 mm diameter / non-protected" }, { "Value": 7, "DisplayName": "IP21", "Description": "≥ 12,5 mm diameter / vertically dripping" }, { "Value": 8, "DisplayName": "IP22", "Description": "≥ 12,5 mm diameter / dripping (15° tilted)" }, { "Value": 9, "DisplayName": "IP30", "Description": "≥ 2,5 mm diameter / non-protected" }, { "Value": 10, "DisplayName": "IP31", "Description": "≥ 2,5 mm diameter / vertically dripping" }, { "Value": 11, "DisplayName": "IP32", "Description": "≥ 2,5 mm diameter / dripping (15° tilted)" }, { "Value": 12, "DisplayName": "IP33", "Description": "≥ 2,5 mm diameter / spraying" }, { "Value": 13, "DisplayName": "IP40", "Description": "≥ 1,0 mm diameter / non-protected" }, { "Value": 14, "DisplayName": "IP41", "Description": "≥ 1,0 mm diameter / vertically dripping" }, { "Value": 15, "DisplayName": "IP42", "Description": "≥ 1,0 mm diameter / dripping (15° tilted)" }, { "Value": 16, "DisplayName": "IP43", "Description": "≥ 1,0 mm diameter / spraying" }, { "Value": 17, "DisplayName": "IP44", "Description": "≥ 1,0 mm diameter / splashing" }, { "Value": 18, "DisplayName": "IP45", "Description": "≥ 1,0 mm diameter / jetting" }, { "Value": 19, "DisplayName": "IP50", "Description": "dust-protected / non-protected" }, { "Value": 20, "DisplayName": "IP51", "Description": "dust-protected / vertically dripping" }, { "Value": 21, "DisplayName": "IP52", "Description": "dust-protected / dripping (15° tilted)" }, { "Value": 22, "DisplayName": "IP53", "Description": "dust-protected / spraying" }, { "Value": 23, "DisplayName": "IP54", "Description": "dust-protected / splashing" }, { "Value": 24, "DisplayName": "IP55", "Description": "dust-protected / jetting" }, { "Value": 25, "DisplayName": "IP56", "Description": "dust-protected / powerful jetting" }, { "Value": 26, "DisplayName": "IP57", "Description": "dust-protected / temporary immersion" }, { "Value": 27, "DisplayName": "IP58", "Description": "dust-protected / continuous immersion" }, { "Value": 28, "DisplayName": "IP60", "Description": "dust-tight / non-protected" }, { "Value": 29, "DisplayName": "IP61", "Description": "dust-tight / vertically dripping" }, { "Value": 30, "DisplayName": "IP62", "Description": "dust-tight / dripping (15° tilted)" }, { "Value": 31, "DisplayName": "IP63", "Description": "dust-tight / spraying" }, { "Value": 32, "DisplayName": "IP64", "Description": "dust-tight / splashing" }, { "Value": 33, "DisplayName": "IP65", "Description": "dust-tight / jetting" }, { "Value": 34, "DisplayName": "IP66", "Description": "dust-tight / powerful jetting" }, { "Value": 35, "DisplayName": "IP67", "Description": "dust-tight / temporary immersion" }, { "Value": 36, "DisplayName": "IP68", "Description": "dust-tight / continuous immersion" }, { "Value": 37, "DisplayName": "IP69", "Description": "dust-tight / high pressure and temperature water jet" }, { "Value": 38, "DisplayName": "IPX1", "Description": "not defined / vertically dripping" }, { "Value": 39, "DisplayName": "IPX2", "Description": "not defined / dripping (15° tilted)" }, { "Value": 40, "DisplayName": "IPX3", "Description": "not defined / spraying" }, { "Value": 41, "DisplayName": "IPX4", "Description": "not defined / splashing" }, { "Value": 42, "DisplayName": "IPX5", "Description": "not defined / jetting" }, { "Value": 43, "DisplayName": "IPX6", "Description": "not defined / powerful jetting" }, { "Value": 44, "DisplayName": "IPX7", "Description": "not defined / temporary immersion" }, { "Value": 45, "DisplayName": "IPX8", "Description": "not defined / continuous immersion" }, { "Value": 46, "DisplayName": "IP1X", "Description": "≥ 50 mm diameter / not defined" }, { "Value": 47, "DisplayName": "IP2X", "Description": "≥ 12,5 mm diameter / not defined" }, { "Value": 48, "DisplayName": "IP3X", "Description": "≥ 2,5 mm diameter / not defined" }, { "Value": 49, "DisplayName": "IP4X", "Description": "≥ 1,0 mm diameter / not defined" }, { "Value": 50, "DisplayName": "IP5X", "Description": "dust-protected / not defined" }, { "Value": 51, "DisplayName": "IP6X", "Description": "dust-tight / not defined" } ]

The ExClass provides the information to the type of explosive protection (according to DIN EN IEC 60079-0). Value examples:

Ex ta (Protection by enclosure Ex t, Category 1 EPL a, very high level of protection)
Ex eb (Increased safety Ex e, Category 2 EPL b, high level of protection)
Ex ic (Intrinsic safety Ex i, Category 3 EPL c, normal level of protection)

7.11.17 PtFunctionalSafetyAttributesType ObjectType Definition

7.11.17.1 Overview

The PtFunctionalSafetyAttributesType provides the asset attributes describing the various safety functions, certifications and safety transport protocols and is formally defined in Table 154.

Table 154 – PtFunctionalSafetyAttributesType Definition

Attribute	Value
BrowseName	PtFunctionalSafetyAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
HasPtAttributes	Object	<SafetyFunctionsAttributes>		PtSafetyFunctionsAttributesType	OP, RO
0:HasProperty	Variable	SafetyAssessor	0:String	0:PropertyType	O, RO
0:HasProperty	Variable	SafetyTransportProtocols	0:String[]	0:PropertyType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.17.2 Object Description

<SafetyFunctionsAttributes> provides the information to safety functions, standards, safety integrity level (SIL), performance level,safety category and is formally defined in chapter 7.11.18.

SafetyAssessor provides the information to the existing assessor certificates. Examples are:

SGS Société Générale de Surveillance SA.
TÜV
DEKRA

SafetyTransportProtocols provides the information to the supported safety transport protocols. Value examples are:

FF-SIS
CIP Safety
PROFIsafe
INTERBUS Safety
CC-Link Safety
Fail Safe over EtherCAT (FSoE)
Ethernet POWERLINK Safety
EPASafety
RAPIEnet Safety
SafetyNET p

7.11.18 PtSafetyFunctionsAttributesType ObjectType Definition

7.11.18.1 Overview

The PtSafetyFunctionsAttributesType provides the asset attributes describing the safety functions, standards, safety integrity level (SIL), safety performance level and safety category and is formally defined in Table 155.

Table 155 – PtSafetyFunctionsAttributesType Definition

Attribute	Value
BrowseName	PtSafetyFunctionsAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.5.1
0:HasComponent	Variable	SafetyFunctions	0:UInt16	0:MultiStateValueDiscreteType	O, RO
0:HasProperty	Variable	SafetyStandards	0:String[]	0:PropertyType	O, RO
0:HasComponent	Variable	FunctionalSafetySilLevel	0:UInt16	0:MultiStateValueDiscreteType	O, RO
0:HasComponent	Variable	FunctionalSafetyPerformanceLevel	0:UInt16	0:MultiStateValueDiscreteType	O, RO
0:HasComponent	Variable	FunctionalSafetyCategory	0:UInt16	0:MultiStateValueDiscreteType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.18.2 Object Description

SafetyFunctions provides the supported safety functions. The values of the MultiStateValueDiscreteType variable are defined in Table 156 and shall be used. Additional values will be added in the specification. Manufacturer-specific extensions are not foreseen.

Table 156 – PtSafetyFunctionsAttributesType Attribute values for child Nodes

BrowsePath

Value Attribute

Description Attribute

SafetyFunctions

0:EnumValues

[ { "Value": 0, "DisplayName": "STO", "Description": "Safe torque off" }, { "Value": 1, "DisplayName": "SS1", "Description": "Safe stop 1" }, { "Value": 2, "DisplayName": "SS2", "Description": "Safe stop 2" }, { "Value": 3, "DisplayName": "SOS", "Description": "Safe operating stop" }, { "Value": 4, "DisplayName": "SLS", "Description": "Safely limited speed" }, { "Value": 5, "DisplayName": "SSM", "Description": "Safe speed monitor" }, { "Value": 6, "DisplayName": "SSR", "Description": "Safe speed range" }, { "Value": 7, "DisplayName": "SLP", "Description": "Safe limited position" }, { "Value": 8, "DisplayName": "SP", "Description": "Safe position" }, { "Value": 9, "DisplayName": "SDI", "Description": "Safe direction" }, { "Value": 10, "DisplayName": "SBC", "Description": "Safe brake control" }, { "Value": 11, "DisplayName": "SBT", "Description": "Safe brake test" }, { "Value": 12, "DisplayName": "S-DI", "Description": "Safe digital input" }, { "Value": 13, "DisplayName": "S-DO", "Description": "Safe digital output" }, { "Value": 14, "DisplayName": "S-AI", "Description": "Safe analog input" }, { "Value": 15, "DisplayName": "S-AO", "Description": "Safe analog output" } ]

FunctionalSafetySilLevel

0:EnumValues

[ { "Value": 0, "DisplayName": "SIL_1", "Description": "Safety integrity level 1" }, { "Value": 1, "DisplayName": "SIL_2", "Description": "Safety integrity level 2" }, { "Value": 2, "DisplayName": "SIL_3", "Description": "Safety integrity level 3" }, { "Value": 3, "DisplayName": "SIL_4", "Description": "Safety integrity level 4" } ]

FunctionalSafetyPerformanceLevel

0:EnumValues

[ { "Value": 0, "DisplayName": "PLA", "Description": "Performance level a" }, { "Value": 1, "DisplayName": "PLB", "Description": "Performance level b" }, { "Value": 2, "DisplayName": "PLC", "Description": "Performance level c" }, { "Value": 3, "DisplayName": "PLD", "Description": "Performance level d" }, { "Value": 4, "DisplayName": "PLE", "Description": "Performance level e" } ]

FunctionalSafetyCategory

0:EnumValues

[ { "Value": 0, "DisplayName": "CAT_B", "Description": "Category B" }, { "Value": 1, "DisplayName": "CAT_1", "Description": "Category 1" }, { "Value": 2, "DisplayName": "CAT_2", "Description": "Category 2" }, { "Value": 3, "DisplayName": "CAT_3", "Description": "Category 3" }, { "Value": 4, "DisplayName": "CAT_4", "Description": "Category 4" } ]

SafetyStandards provides the supported safety standards. Examples are:

IEC 61800-5
IEC 61508

FunctionalSafetySilLevel provides the information to the supported safety integrity level (SIL) according to IEC 61508 standard. The values of the MultiStateValueDiscreteType variable are defined Table 156 and shall be used. Additional values are added in the specification in according to the standard. Manufacturer-specific extensions are not foreseen.

FunctionalSafetyPerformanceLevel provides the value used to define the ability of safety-related parts of control systems to perform a safety function under foreseeable conditions. The values of the MultiStateValueDiscreteType variable are defined in Table 156and shall be used. Additional values are added in the specification in according to the EN ISO 13849 standard. Manufacturer-specific extensions are not foreseen.

FunctionalSafetyCategory provides the information to the existing functional safety category. The values of the MultiStateValueDiscreteType variable are defined in Table 156 and shall be used. Additional values are added in the specification in according to the ISO 13849-1 standard. Manufacturer-specific extensions are not foreseen.

7.11.19 PtStandardAttributesType ObjectType Definition

7.11.19.1 Overview

The PtStandardAttributesType provides the asset attributes of all supported standards and is formally defined in Table 157.

Table 157 – PtStandardAttributesType Definition

Attribute	Value
BrowseName	PtStandardAttributesType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the PtCommonAssetAttributesType defined in chapter 7.11
0:HasProperty	Variable	Standards	0:String[]	0:PropertyType	O, RO
Conformance Units
Powertrain Attributes Information

7.11.19.2 Object Description

Standards provides all supported standards of a powertrain asset. Examples are:

DIN EN 61800
EN 63000:2018
EN ISO 13849