OPC 40082-1: PlasticsRubber - Peripheral devices - Temperature control devices
Released 1.01
2020-04-22
This document is subject to the license terms described here.
The general OPC Foundation specification license agreement also applies and can be found here.
This document is a copy of the original which can be found here.
This document defines nodes in the following nodesets:
1 Scope
2 Normative references
3 Terms, definitions and conventions
3.1 Overview
3.2 Conventions used in this document
3.3 Abbreviations
4 General information to OPC UA interfaces for plastics and rubber machinery and OPC UA
5 Use cases
6 TCD_InterfaceType
6.1 TCD_InterfaceType Definition
6.2 DisplayLanguage
7 Identification
8 TCDSpecificationType
8.1 MaxTemperature
8.2 PowerValue
8.3 ConnectedLoad
8.4 NominalFlowRate
8.5 CoolingCapacity
8.6 DeviceZoneId
9 OperationType
9.1 DeviceMappingNumber
9.2 HighestActiveAlarmSeverity
9.3 ActiveErrors
9.4 ResetAllErrors
9.5 ResetErrorById
9.6 OperatingMode
9.7 HoursOfOperation
9.8 IdentifyDevice
9.9 SwitchOn
9.10 SwitchOff
9.11 ReduceToStandByOn
9.12 ReduceToStandByOff
10 DeviceZoneType
10.1 Temperature
10.2 InternalMeasuringPoint
10.3 StandbyTemperature
10.4 SwitchingOffTemperature
10.5 TemperatureLimitation
10.6 TemperatureMainLine
10.7 TemperatureReturnLine
10.8 TemperatureDifference
10.9 FlowRate
10.10 PressureMainLine
10.11 PressureReturnLine
10.12 PressureDifference
10.13 ActualProcessPower
10.14 ActualRegulationRatio
10.15 DelayTimeAfterCooling
10.16 PumpSpeed
10.17 ActualPumpSpeedRPM
10.18 ActualPumpPower
10.19 PumpControlMode
10.20 ExternalSensorType
10.20.1 ActualValue
10.20.2 Used
10.20.3 ExternalSensorModeOn
10.20.4 ExternalSensorModeOff
10.20.5 ThermocoupleType and CommunicationProtocolType
10.20.6 AutomaticModeSwitch
10.20.7 ClosedLoopControl
10.21 LeakStopperType
10.21.1 On
10.21.2 Off
10.22 MouldEvacuationType
10.22.1 On
10.22.2 Off
10.22.3 TemperatureLimit
10.22.4 Time
10.22.5 Sink
10.22.6 Mode
10.23 MaintenanceInformationType
10.24 ExternalChannelsType
10.25 ExternalChannelType
10.25.1 SwitchOn
10.25.2 SwitchOff
10.25.3 SwitchedOn
10.25.4 Temperature
10.25.5 TemperatureMainLine
10.25.6 TemperatureReturnLine
10.25.7 TemperatureDifference
10.25.8 FlowRate
10.25.9 PressureMainLine
10.25.10 PressureReturnLine
10.25.11 PressureDifference
10.25.12 ControlMode
11 Alarms
12 Profiles and Conformance Units
13 Namespaces
13.1 Namespace Metadata
13.2 Handling of OPC UA Namespaces
Annex A (normative)OPC 40082-1 Namespace and mappings