OPC 40082-1: PlasticsRubber - Peripheral devices - Temperature control devices


Released 1.01

2020-04-22

This document is subject to the license terms described here.

The general OPC Foundation specification license agreement also applies and can be found here.

This document is a copy of the original which can be found here.


1 Scope 2 Normative references 3 Terms, definitions and conventions 3.1 Overview 3.2 Conventions used in this document 3.3 Abbreviations 4 General information to OPC UA interfaces for plastics and rubber machinery and OPC UA 5 Use cases 6 TCD_InterfaceType 6.1 TCD_InterfaceType Definition 6.2 DisplayLanguage 7 Identification 8 TCDSpecificationType 8.1 MaxTemperature 8.2 PowerValue 8.3 ConnectedLoad 8.4 NominalFlowRate 8.5 CoolingCapacity 8.6 DeviceZoneId 9 OperationType 9.1 DeviceMappingNumber 9.2 HighestActiveAlarmSeverity 9.3 ActiveErrors 9.4 ResetAllErrors 9.5 ResetErrorById 9.6 OperatingMode 9.7 HoursOfOperation 9.8 IdentifyDevice 9.9 SwitchOn 9.10 SwitchOff 9.11 ReduceToStandByOn 9.12 ReduceToStandByOff 10 DeviceZoneType 10.1 Temperature 10.2 InternalMeasuringPoint 10.3 StandbyTemperature 10.4 SwitchingOffTemperature 10.5 TemperatureLimitation 10.6 TemperatureMainLine 10.7 TemperatureReturnLine 10.8 TemperatureDifference 10.9 FlowRate 10.10 PressureMainLine 10.11 PressureReturnLine 10.12 PressureDifference 10.13 ActualProcessPower 10.14 ActualRegulationRatio 10.15 DelayTimeAfterCooling 10.16 PumpSpeed 10.17 ActualPumpSpeedRPM 10.18 ActualPumpPower 10.19 PumpControlMode 10.20 ExternalSensorType 10.20.1 ActualValue 10.20.2 Used 10.20.3 ExternalSensorModeOn 10.20.4 ExternalSensorModeOff 10.20.5 ThermocoupleType and CommunicationProtocolType 10.20.6 AutomaticModeSwitch 10.20.7 ClosedLoopControl 10.21 LeakStopperType 10.21.1 On 10.21.2 Off 10.22 MouldEvacuationType 10.22.1 On 10.22.2 Off 10.22.3 TemperatureLimit 10.22.4 Time 10.22.5 Sink 10.22.6 Mode 10.23 MaintenanceInformationType 10.24 ExternalChannelsType 10.25 ExternalChannelType 10.25.1 SwitchOn 10.25.2 SwitchOff 10.25.3 SwitchedOn 10.25.4 Temperature 10.25.5 TemperatureMainLine 10.25.6 TemperatureReturnLine 10.25.7 TemperatureDifference 10.25.8 FlowRate 10.25.9 PressureMainLine 10.25.10 PressureReturnLine 10.25.11 PressureDifference 10.25.12 ControlMode 11 Alarms 12 Profiles and Conformance Units 13 Namespaces 13.1 Namespace Metadata 13.2 Handling of OPC UA Namespaces Annex A (normative)OPC 40082-1 Namespace and mappings