Search

8 result(s) for tool

• OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management
  3.2.13 Tool
  Tool exchangeable component used in a machine tool to execute the machining process EXAMPLE: May be drills, ball milling heads, cutting inserts, pinching tools and so forth, or even ... contact tool like a processing laser
• OPC-40503-1 – OPC UA for Metal Forming - Part 1: General
  3.2.6 tool
  tool combination of upper tool and lower tool Note 1 to entry: Tool/punch is replaced by upper tool . Note 2 to entry: Die is replaced by lower tool . [SOURCE
• OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface
  3.2.7 Tool
  Tool exchangeable components used in a machine to execute the production process Note: They may for example be drills, ball milling heads, cutting inserts, pinching tools and so forth ... contact tool, for example a processing laser
• OPC-30040 – OPC UA for AutomationML - Xxx: OPC UA Information Model for AutomationML
  7.4.2.7.2 ObjectType Definition
  ObjectType Definition The Tool is formally defined in Table 65 . Table 65 - Tool Definition Attribute Value BrowseName Tool IsAbstract False References NodeClass BrowseName DataType TypeDefinition ModellingRule Inherit the components
• OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management
  8.5.2 ToolListType
  ToolListType The ToolListType is a list of tools, where a tool may be a single tool or a multitool. The ToolListType is formally defined in Table 60 . Table 60 - ToolListType ... inheriting the InstanceDeclarations of that Node. 0:HasComponent Object <Tool> BaseToolType OP 0:HasProperty Variable 0:NodeVersion 0:String 0:PropertyType O, RO 0:GeneratesEvent ObjectType 0:GeneralModelChangeEventType
• OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management
  8.5.5 MultiToolType
  usually used in order to have several tools available in-process without requiring explicit tool-changes. Multitools carry several tools on one tool magazine socket or one revolver index position ... prepared unit. Typical applications are in turning, when one indexed position of the tool revolver holds several outer-diameter cutting inserts and boring tools, such that a tool change process
• OPC-40503-1 – OPC UA for Metal Forming - Part 1: General
  3.2.2 dead centre
  dead centre the point where the upper tool is during its movement: either nearest/closest to the lower tool (generally, it corresponds to the end of the closing stroke), known ... bottom dead centre (BDC); or furthest from the lower tool (generally, it corresponds to the end of the opening stroke), known as top dead centre (TDC) Note 1 to entry
• OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface
  3.2.8 Tool change
  Tool change Tool change in context of this interface is the action of inserting a tool into the machine. There are two reasons this is done or necessary: 1) tool ... group of tools has expired and machining cannot continue until a new tool with sufficient tool life for the next operation is inserted (causing a tool change) 2) a tool