Search

Scope: Core (OPC-10000-*) All specs

5 result(s) for Stop Method

OPC-30020 – MDIS OPC UA Companion Specification

6.11.5 Motor Stop Method

Motor Stop Method Stop Method is used to stop the Motor. Signature: Stop ( [in] 0:Boolean OverrideInterlocks); Table 79 - Stop Method Arguments Argument Description OverrideInterlocks Boolean indicating if the Stop ... Manual. If the motor is not Running this command is ignored. Comments The Stop Method commands the Motor to stop. Table 80 specifies the AddressSpace representation for the Stop Method
OPC-30050 – OPC UA for PackML - Common Object Model: PackML

6.7.7 Stop Method

Stop Method This Method is used as part of the PackMLMachineStateMachineType . It allows an OPC UA Client to change the state of this state machine to the Stopping state. Signature ... Stop( ); Method result codes are defined in Table 36 Table 36 - Stop Method result codes Result Code Description Bad_MethodInvalid See OPC 10000-4 - Services for the description of this
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics

7.1.10.1 Overview

ready to be re-run. Start Method starts the execution of the Task . Stop Method stops the execution of the Task
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration

7.10.2 Stop Method

Stop Method The signature of this Method is specified below. Signature Stop ( [in] 0:Int64 StopMode [out] 0:Int32 Status ); The Stop Method is called by a Client to stop ... execution of the entity which is represented by the state machine. Table 39 - Stop Method Arguments Argument Description StopMode provides a way to differentiate between different stop modes. This parameter
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration

7.12.2 Stop Method

Stop Method The signature of this Method is specified below. Signature Stop ( [in] 0:Int64 StopMode [out] 0:Int32 Status ); The Stop Method allows an authorized Client to command ... Table 31 ). If not, then a Bad_InvalidArgument Result Code is returned. Table 54 - Stop Method Arguments Argument Description StopMode must either be 0 or one of those listed