Search

5 result(s) for Signals

• OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>
  6.2 Encoder Channel Signals and Measurements
  Encoder Channel Signals and Measurements Figure 10 shows a reduced Encoder model with the relationship of the Signal Objects in the PROFINET aspect with the Variables providing concrete Values ... figure shall give a basic understanding by demonstrating the model organization using three Standard Signals transmitted with Standard Telegram 89 (See [ ENCP ], chapter 5.6.2). Figure 10 - Encoder Channel Signals
• OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>
  7.1.1 SetApplicationTag Method
  parent EncoderChannelType Object is locked. Signal Variables The following Variables represent the Standard Signals as defined in [ ENCP ], chapter 5.6.1. The supported Standard Signals are determined by the configured Standard ... Telegram . The Server shall provide the Variables representing the Standard Signals of the configured Standard Telegram . The NIST_A Variable represents the "speed actual value" 16-bit signal
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  6.1 Introduction to OPC UA for Drive Information Model
  Object representing an Axis Object are part of the four different sub-aspects "Signals", "Actual and Command Values", "Diagnosis" and "Axis Properties ... control panel and the use case for data mining. In the optional "Signals" sub-aspect, the "PNSignals" folder Object contains the Variables representing the Signal
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  7.1 DriveAxisType
  HasComponent Object Logbook 3:LogbookType O Conformance Units PDRV Measurement PDRV Diagnosis Events PDRV Signals General Properties The ApplicationTag Variable contains information given by the overall application. The purpose ... MOTOR_ROTARY HYDRAULIC_CYLINDER_LINEAR PNEUMATIC_MOTOR_ROTARY PNEUMATIC_CYLINDER_LINEAR PNSignals folder in Signals sub-aspect The PNSignals folder contains Signal Variables representing the Signals as defined
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  C.1 Signal and parameter mapping to OPC UA Variables
  Variables The PROFINET Drive Information Model covers a subset of the Signals and parameters defined in [ PI 3172 PDP ]. Table 58 gives an overview which parameters and Signals are mapped ... PNSignals" folder, as described in chapter 7.1 , "PNSignals folder in Signals sub-aspect". Variables connected by 0:RepresentsSameEntityAs References (see Figure 11 also) are entered