Search

Scope: Core (OPC-10000-*) All specs

6 result(s) for InputNode

OPC-10000-9 – OPC Unified Architecture - Part 9: Alarms & Conditions

5.5.2 ConditionType

Node, which the Condition is associated with, it may be the same as the InputNode for an Alarm , but it may be a separate node. For example, a motor, which ... well as a temperature sensor associated with the motor. In the former the InputNode for the High RPM Alarm is the value of the Motor RPM, while in the later
OPC-10000-9 – OPC Unified Architecture - Part 9: Alarms & Conditions

5.8.24.2 OffNormalAlarmType

corresponds to one of the possible values of the Variable pointed to by the InputNode Property where the NormalState Property Variable value is the value that is considered ... normal state of the Variable pointed to by the InputNode Property . When the value of the Variable referenced by the InputNode Property is not equal to the value
OPC-30120 – OPC UA for IO-Link Devices and IO-Link Masters - IO-Link: OPC Unified Architecture

9.7 IOLinkAlarmType

supertypes is vendor-specific, according to OPC 10000-9 . The mandatory Properties InputNode and NormalState are vendor-specific and typically set to the NULL NodeId. The mandatory Property SuppressedOrShelved
OPC-40082-2 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 2: Hot runner devices

11 Diagnostics

defined in OPC 40083. For zone-related results published by instances of DiagnosisStepEndEventType , InputNode shall contain the NodeId of the corresponding zone instance
OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions

27.2 MonitoredParameterAlarmType

Other Subtype of HelpOffNormalAlarmType 0:HasComponent Variable Status 0:UInt16 0:MultiStateValueDiscreteType M The InputNode (defined in the AlarmConditionType ) shall be set to the NodeId of the element
OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions

35.4.2 InputNode

InputNode In the case of component-related diagnostic steps (e.g. different zones of a hotrunner), this Property holds the NodeID of the corresponding instance. For general information InputNode holds