Search

12 result(s) for Initialized

• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  7.5.2.2 PrepareRecipe
  Mandatory HasProperty Variable OutputArguments Argument[] PropertyType Mandatory If the vision system is in state Initialized, it is expected to change into state Ready after successful preparation of the recipe ... capabilities of the vision system, it may temporarily leave state Ready for state Initialized , then return to Ready , or, if the system is capable of preparing recipes in the background
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  7.5.2.3 UnprepareRecipe
  only recipe currently prepared, the vision system is expected to change into state Initialized after successful reversion of the preparation of the recipe. If there are additional recipes in prepared ... capabilities of the vision system, it may temporarily leave state Ready for state Initialized , then return to Ready . If there is more than one recipe with the identical ExternalId
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  8.2.2.2 Resetting the system
  this specification. Either the vision system is idle - reflected by, e.g. the Ready or Initialized state - and the intent of calling the Reset method is to return to Preoperational state
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  8.2.2.4 Error handling
  decide that it needs a re-initialization of a recipe and return to the Initialized state. It may even decide that it can resume a synchronization with an external system
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  8.2.6.2 Preoperational State
  Halt method for the Halted state or the SelectModeAutomatic method for sub-state Initialized of the Automatic mode SubStateMachine of state Operational . (see 8.3 for the description of the Automatic
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  8.2.8.3 SelectModeAutomatic method
  system to enter the mandatory AutomaticModeStateMachine attached to Operational state, or, more precisely, the Initialized state of that SubStateMachine. Signature SelectModeAutomatic ([out] Int32 error); Table 89 - SelectModeAutomatic Method Arguments Argument
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  8.3.1 Introduction
  SubStateMachine is typically entered by a transition from state Preoperational to its internal state Initialized , either an automatic transition or caused by the SelectModeAutomatic method It can also be entered ... Ready state for the next Start method; failing that, it will return to state Initialized to be made Ready again. Note however, that the method of resolving an error
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  8.3.2.1 Introduction
  operation or by the SelectModeAutomatic method. A call to SelectModeAutomatic causes transition to state Initialized . Alternatively, the system can automatically transition into Initialized . It is expected that within the states ... Initialized and Ready , the system can carry out management operations, with recipes and configurations. In order to carry out automatic evaluations, at least one recipe needs to be prepared
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  8.3.2.5 Entering the "AutomaticMode" state machine
  through an automatic transition or a transition triggered by the SelectModeAutomatic method into the Initialized state of the VisionAutomaticModeStateMachine . In these cases, the parent state machine transitions into the parent
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  8.3.5.3 Ready State
  PrepareRecipe method in this state may cause the system to fall back into Initialized state, temporarily preventing it from accepting Start methods. If an error is dectected which suspends normal ... StartSingleJob method call. Into the ContinuousExecution state by a StartContinuous method call. Into the Initialized state by an UnprepareRecipe method call. Into the Preoperational state of the VisionStateMachine
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  B.1.5.1 Types of recipe management
  configured outside the scope of this specification, starts automatically through states Preoperational and Initialized into Ready . It will immediately react to Start method, ignoring a possible recipe or product argument ... system that can hold a single recipe; it may start through Preoperational into Initialized , then wait for a call to the AddRecipe method and immediately prepare this recipe and transition
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  B.1.5.2 State handling for recipe management
  PrepareRecipe methods in Ready state may result in the system falling back into state Initialized , then returning automatically to state Ready, or (in the case of AddRecipe ) waiting for PrepareRecipe ... combination, the only way for the client to actually force a return to the Initialized state is by going through Preoperational state via a reset. It must be prepared however