Search

6 result(s) for EngineeringUnit

• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  5.6.2 Variable NodeClass
  DataType of Number (or a subtype of Number) and all share the same EngineeringUnit . This optional Property indicates the engineering units for the value of the DataVariable (e.g. hertz
• OPC-10000-8 – OPC Unified Architecture - Part 8: Data Access
  6.5.1 HasEngineeringUnitDetails
  ServerUnitType ObjectType . The Reference has to change if the value (the concrete EngineeringUnit ) is changing. Clients can subscribe to the value and, in case of change, should rebrowse. The HasEngineeringUnitDetails
• OPC-10000-81 – OPC Unified Architecture - Part 81: UAFX Connecting Devices and Information Model
  D.3.7.2 Example of a simple ControlGroup
  provides the output Variable Temperature, indicating the current temperature. It also includes a Variable EngineeringUnit (e.g., °C, °F, °K, …). This configuration variable allows the selection of the engineering unit ... Figure D.28 - Sample FunctionalEntity for a simple temperature monitor While using the Temperature, the EngineeringUnit for the Temperature should not change. To achieve this behaviour, the ControlGroup MonitorControl is provided
• OPC-10000-81 – OPC Unified Architecture - Part 81: UAFX Connecting Devices and Information Model
  D.3.7.4 Using ControlGroups with Connections
  with Connections . This example is an extension of the simple ControlGroup . Assume that the EngineeringUnit of Temperature (see Figure D.28 ) should not change during the lifetime of a Connection ... achieve this behaviour would establish the control of MonitorControl using the EstablishControlCmd, set the EngineeringUnit with the desired unit (e.g., °F) using the SetConfigurationDataCmd , and reassign control to the ConnectionEndpoint
• OPC-40200 – OPC UA for Weighing Technology
  7.5.3 ObjectType Description
  scale that may be operated depending on the additional parameters within this type. Range . EngineeringUnit defines the engineering unit of the range. VerificationScaleInterval defines the value, expressed in units
• OPC-40210 – OPC UA for Geometric Measurement Systems
  8.3 SensorType
  Optional 0:HasComponent Variable Class 0:UInteger 0:MultiStateDiscreteType 0:Mandatory 0:HasProperty Variable EngineeringUnit 0:EUInformation 0:Optional 0:HasProperty Variable IsQualifiedStatus ToolIsQualifiedStatus 0:PropertyType 0:Optional 0:HasProperty ... operated. This value must not be changed (see Table 17 ) For each quantity, an EngineeringUnit is defined as reference value. A measured value is a multiple of this unit. IsQualifiedStatus