Search

8 result(s) for 0:EngineeringUnits

• OPC-40210 – OPC UA for Geometric Measurement Systems
  8.3 SensorType
  Others 5:ToolLife 0:HasComponent Variable Qualified 0:Double 5:ToolLifeType 0:Optional The 0:EngineeringUnits of Qualified must be a time unit (e.g., hour, days) and the StartValue ... Table 17 - SensorType Attribute values for child Nodes BrowsePath Value Attribute Description Attribute Capabilities 0:EnumStrings Other PtMeas PtMeasSelfCenter FeatureExtract ProfileScan ArealScan Class 0:EnumStrings Other NoTool UnDefTool TactileTouchTrigger TactileMeasuring
• OPC-40450-1 – OPC UA for Joining Systems - Part 1: Base
  9.1 JoiningDataVariableType
  0:HasComponent Variable PhysicalQuantity 0:Byte 0:MultiStateDiscreteType O, RO 0:HasProperty Variable 0:EngineeringUnits 0:EUInformation 0:PropertyType O, RO Conformance Units IJT Engineering Units The component Variables ... detection. It represents the change of the slope in a torque over angle graph. 0:EngineeringUnits defines the engineering unit of the values. Note: The quantity and units
• OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management
  11.1 ToolLifeType
  Other Subtype of the 0:BaseDataVariableType defined in OPC 10000-5 0:HasProperty Variable 0:EngineeringUnits 0:EUInformation 0:PropertyType M, RO 0:HasProperty Variable StartValue 0:Number 0:PropertyType ... HasProperty Variable IsCountingUp 0:Boolean 0:PropertyType M, RO Conformance Units MachineTool Equipment ToolLife 0:EngineeringUnits is used as defined in OPC 10000-8 . StartValue is the initial value
• OPC-40503-1 – OPC UA for Metal Forming - Part 1: General
  7.6 FormingToolType ObjectType Definition
  middle axis of the complete tool holder. The Position parameter is extended by an 0:EngineeringUnits property as well as an 0:EURange property describing detailed static information . Figure
• OPC-40540 – OPC UA for Additive Manufacturing
  6.4 Engineering Units Recommendations
  Engineering Units Recommendations This specification makes use of 0:EngineeringUnits and 0:EUInformation for describing the units of measurement. For this 0:EUInformation applies the UN/CEFACT "Codes for Units
• OPC-40540 – OPC UA for Additive Manufacturing
  8.4 ProcessValueAMType Definition
  indicated by 0:Events sent via the 5:Notification node of the AdditiveManufacturingType . The 0:EngineeringUnits of the 0:AnalogSignal inherited from 8:ProcessValueType uses the 0:EUInformation to indicate ... engineering unit of the process value represented. For the 0:EngineeringUnits only the recommendations according to 6.4 should be used
• OPC-40540 – OPC UA for Additive Manufacturing
  8.6 FeedstockType Definition
  remaining amount of this feedstock instance installed on the AM machine. For the 0:EngineeringUnits only the recommendations according to 6.4 should be used. ReadyForProduction indicates if the feedstock meets ... following job. After a feedstock change, the Cycle count shall start at 0
• OPC-40540 – OPC UA for Additive Manufacturing
  13.2 Handling of OPC UA Namespaces
  standards body although the namespace of the NodeId reflects something else, for example the 0:EngineeringUnits Property . All NodeIds of Nodes not defined in this document shall ... Namespaces used in this document NamespaceURI Namespace Index Example http://opcfoundation.org/UA/ 0 0:EngineeringUnits http://opcfoundation.org/UA/DI/ 2 2:Identification http://opcfoundation.org/UA/Machinery/ 3 3:Machines http://opcfoundation.org/UA/IA/