This section describes DataTypes that can be used to serialize the Objects that compose a ConnectionConfigurationSet (see 6.8 and 6.10) into a single structure (ConnectionConfigurationSetDataType). The ConnectionConfigurationSetDataType may, for example, be used for persisting a ConnectionConfigurationSet, for storing it within a File (see F.2), or for maintaining the configuration of a ConnectionManager (see F.3).
For the base principles used for the mapping, see clause F.1.2.
Figure F.1 depicts the different components of the ConnectionConfigurationSetDataType and their relation to each other.
Figure F.1 – ConnectionConfigurationSet serialization
References between Objects in different Object lists are mapped using an array index field for the related structure array. For example, the AutomationComponentConfigurationDataType has ServerAddressIndex that contains an index into the ServerAddress in the ConnectionConfigurationSetConfDataType. Indices are defined as Int32; a negative number indicates no Reference exists.
OPC UA uses Namespaces, and in a defined scope, all identifiers (NodeId, QualifiedName) use a NamespaceIndex instead of a NamespaceUri. The scope has a NamespaceArray with URIs where the NamespaceIndex is defined as an index into this array. For a Server, the scope is the complete Server. For a UANodeSet XML file, it is the file.
A ConnectionConfigurationSet (see 6.8.2) contains node identifiers related to different scopes, as illustrated in Figure F.2. In this illustration, the ConnectionConfigurationSet contains information for two different Servers. Node identifiers in the Information Model for the ConnectionManager (i.e., an instance of ConnectionConfigurationSetType) use PortableNodeIdentifier (see 10.32) to support the resolution for the dedicated scope (see also 13.3).
Figure F.2 – Scopes within a ConnectionConfigurationSet
To reduce the overall size of the DataTypes defined in this Clause (i.e. ConnectionConfigurationSetConfDataType), NodeId, AliasName and RelativePath are used instead of their portable version. The scope of those identifiers is defined by the related ServerAddressConfDataType structure containing a Namespace array. The NamespaceIndex of a node identifier is used as an index into the Namespace array of the related ServerAddressConfDataType.
A ConnectionManager can map NodeId and RelativePath contained in the DataTypes to their portable versions using the NamespaceUri from the Namespace array when it loads the ConnectionConfigurationSet from the data structure.
There is no generic DataType defined to represent a SelectionListType Variable. A generic definition would create additional overhead since the values may have different DataTypes.
To simplify the handling of SelectionListType, each Variable that is of SelectionListType is mapped to:
- A Structure field with the corresponding DataType representing the current value. The field name is constructed from the Variable name (<Variable name>).
- A Structure field with an array of the corresponding DataType representing the additional selection options (selectable values associated with the selection list – the list may contain only the current value if this selection list currently does not provide for modifications). The field name is constructed from the Variable name with ‘Selection’ suffix (<Variable name>Selection).
- A Structure field with DataType Boolean indicates if the list of selectable values is enterable by a Client. The field is omitted if the specification requires that RestrictToList is set to TRUE (i.e. no values can be entered; only a selection is possible). The field name is constructed from the Variable name with ‘Modify’ suffix (<Variable name>Modify).
Structured DataTypes may only be extended by subtyping. This is a problem if Structures are embedded into other Structures, e.g., the ConnectionConfigurationSet-related Structure has an array of AutomationComponent related Structures. Therefore, each Structure has an additional field with an array of KeyValuePairs that may be used for potential future standardized or vendor-specific extensions.
ConnectionConfiguration and communication flow-related configuration Structures use Structures with optional fields to handle the optional Variables.
In other configuration Structures, AllowSubtypes is needed. Since AllowSubtypes cannot be combined with IsOptional, optional handling is done with empty arrays or null values for the used DataType.
This Structure DataType is used to hold the information for a ConnectionConfigurationSet.
It is semantically equivalent to the ConnectionConfigurationSetType as defined in 6.8.2 with the exception that the elements ConnectionConfigurationSetStateMachine, Edit, and Lock as defined in the ConnectionConfigurationSetType are not part of this DataType. If this DataType is converted to an Object, the ConnectionConfigurationSetStateMachine shall be in State Ready, the Edit shall be set to False, and the Lock shall be assigned to the ConnectionManager.
The ConnectionConfigurationSetConfDataType is formally defined in Table F.1.
Table F.1 – ConnectionConfigurationSetConfDataType structure
|
Name |
Type |
Description |
Allow Subtypes |
|
ConnectionConfigurationSetConfDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
BrowseName |
0:String |
String part of the BrowseName of the ConnectionConfigurationSet. |
False |
|
ConnectionConfigurationSetFolder |
0:String[] |
Optional path of the ConnectionConfigurationSet folder used to group ConnectionConfigurationSets where each entry in the String array represents one level in the folder hierarchy. If no grouping is needed, the parameter is a null or empty String array. |
False |
|
Connections |
4:ConnectionConfigurationConfDataType[] |
A list of Connection configurations to be established. |
False |
|
CommunicationFlows |
4:CommunicationFlowConfigurationConfDataType[] |
A list of communication model-specific configurations to apply to Connections. |
True |
|
ServerAddresses |
4:ServerAddressConfDataType[] |
A list of addressing information for AutomationComponents. |
False |
|
AutomationComponentConfigurations |
4:AutomationComponentConfigurationConfDataType[] |
A list of AutomationComponents used for Connection establishment. |
False |
|
RollbackOnError |
0:Boolean |
Indicates the behaviour that should be followed when there is an error on Connection establishment. If this Property is TRUE and an error occurs during the Connection establishment sequence, processing of the set will stop, and all established Connections that are part of this set shall be closed. |
False |
|
SecurityKeyServer |
4:SecurityKeyServerAddressConfDataType |
The location of the SKS to be used for PubSub security configuration of this ConnectionConfigurationSet, including SecurityGroups and PubSubKeyPushTargets. If the optional SKS configuration is to be omitted, the field shall be set to null. |
False |
|
Version |
0:UInt32 |
The version of the ConnectionConfigurationSet. |
False |
|
ConnectionConfigurationSetProperties |
0:KeyValuePair[] |
The KeyValuePair array provides additional configuration properties for the ConnectionConfigurationSet. |
False |
The ConnectionConfigurationSetConfDataType representation in the AddressSpace is formally defined in Table F.2.
Table F.2 – ConnectionConfigurationSetConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:ConnectionConfigurationSetConfDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
This Structure DataType holds the information for a Connection configuration.
It is semantically equivalent to the ConnectionConfigurationType as defined in 6.10.2, except that the element ProcessingResult, as defined in the ConnectionConfigurationType, is not part of this DataType. If this DataType is converted to an Object, the ProcessingResult shall be set to Good.
The ConnectionConfigurationConfDataType is formally defined in Table F.3.
Table F.3 – ConnectionConfigurationConfDataType structure
|
Name |
Type |
Description |
Optional |
|
ConnectionConfigurationConfDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
BrowseName |
0:String |
BrowseName of the ConnectionConfiguration |
False |
|
Endpoint1 |
4:ConnectionEndpointConfigurationConfDataType |
The configuration information for the first endpoint of the Connection. |
False |
|
Endpoint2 |
4:ConnectionEndpointConfigurationConfDataType |
The configuration information for the optional second endpoint of the Connection. |
True |
|
ConnectionProperties |
0:KeyValuePair[] |
The KeyValuePair array provides additional optional properties to configure the ConnectionConfigurationSet. |
True |
The ConnectionConfigurationConfDataType representation in the AddressSpace is formally defined in Table F.4.
Table F.4 – ConnectionConfigurationConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:ConnectionConfigurationConfDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
This Structure DataType holds the information for a ConnectionEndpoint configuration, including its parameters.
It is semantically equivalent to the ConnectionEndpointConfigurationType as defined in 6.11.2 and the ConnectionEndpointParameterType as defined in 6.12.2.
The ConnectionEndpointConfigurationConfDataType is formally defined in Table F.5.
Table F.5 – ConnectionEndpointConfigurationConfDataType structure
|
Name |
Type |
Description |
Optional |
|
ConnectionEndpointConfigurationConfDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
FunctionalEntityNode |
4:NodeIdentifier |
FunctionalEntityNode specifies the identifier of the FunctionalEntity to configure for the Connection. If a RelativePath is specified, the path shall be relative to FxRoot. |
False |
|
FunctionalEntityNodeSelection |
4:NodeIdentifier[] |
Selection list options for FunctionalEntityNode. |
True |
|
FunctionalEntityNodeModify |
0:Boolean |
Flag indicating if the FunctionalEntityNode options can be modified. |
True |
|
Name |
0:String |
BrowseName of the ConnectionEndpoint to create in the AutomationComponent. |
False |
|
NameSelection |
0:String[] |
Selection list options for the endpoint name. |
True |
|
NameModify |
0:Boolean |
Flag indicating if the Name options can be modified. |
True |
|
ConnectionEndpointTypeId |
0:NodeId |
ConnectionEndpointTypeId specifies the well-known NodeId of the type definition, which shall be used to create the ConnectionEndpoint. This can be any of the subtypes of the ConnectionEndpointType (for example, PubSubConnectionEndpointType). |
False |
|
InputVariableIds |
4:NodeIdentifier[] |
InputVariableIds specifies a list of node identifiers to be used as inputs. If InputVariableIds is present, it shall contain at least one element. If the array is null or empty, the optional InputVariableIds node is not available. If a RelativePath is specified, the path shall be relative to the FunctionalEntityNode specified in the ConnectionEndpointConfigurations. |
True |
|
OutputVariableIds |
4:NodeIdentifier[] |
OutVariableIds specifies a list of node identifiers to be used as outputs. If OutputVariableIds is present, it shall contain at least one element. If the array is null or empty, the optional OutputVariableIds node is not available. If a RelativePath is specified, the path shall be relative to the FunctionalEntityNode specified in the ConnectionEndpointConfigurations. |
True |
|
IsPersistent |
0:Boolean |
IsPersistent, if TRUE, specifies the created ConnectionEndpoint shall be persistent. |
False |
|
CleanupTimeout |
0:Duration |
CleanupTimeout specifies the value to be used for the clean-up timeout. A negative number indicates an infinite timeout. A zero indicates an immediate clean-up. |
False |
|
IsPreconfigured |
0:Boolean |
IsPreconfigured, if TRUE, specifies the ConnectionEndpoint is preconfigured. |
False |
|
CommunicationLinks |
0:Structure |
CommunicationLinks specifies the configuration data related to this ConnectionEndpoint within the CommunicationModelConfiguration. If this field is set, it shall contain a subtype of 2:Communication LinkConfigurationDataType. |
True |
|
PreconfiguredPublishedDataSet |
0:String |
If it is not an empty string, it specifies the name of a preconfigured PublishedDataSet to be used for connecting the OutputVariables. |
True |
|
PublishedDataSetData |
0:PublishedDataSetDataType |
If not null, specifies a PublishedDataSet to be used for connecting the OutputVariables. |
True |
|
PreconfiguredSubscribedDataSet |
0:String |
If it is not an empty string, it specifies the name of a preconfigured StandaloneSubscribedDataSet to be used for connecting the InputVariables. |
True |
|
SubscribedDataSetData |
0:StandaloneSubscribedDataSetDataType |
If not null, specifies a SubscribedDataSet to be used for connecting the InputVariables. |
True |
|
ExpectedVerificationVariables |
NodeIdentifierValuePair[] |
Specifies the Variables and values to be verified. If a RelativePath is specified as Key, the path shall be relative to FunctionalEntityNode. If the array is null or empty or the field is not present, no Variables are verified. |
True |
|
ControlGroups |
NodeIdentifier[] |
Specifies the ControlGroups to be controlled. If a RelativePath is specified as Key, the path shall be relative to FunctionalEntityNode. If the array is null or empty or the field is not present, no ControlGroups are controlled. |
True |
|
ConfigurationData |
NodeIdentifierValuePair[] |
Specifies the parameters to apply for the configuration of the FunctionalEntityNode. If a RelativePath is specified as Key, the path shall be relative to FunctionalEntityNode. If the array is null or empty or the field is not present, no parameters are set. |
True |
|
EndpointProperties |
0:KeyValuePair[] |
The KeyValuePair array provides additional configuration properties for the endpoint. |
True |
|
AutomationComponentIndex |
0:Int32 |
Reference to the related AutomationComponent in the AutomationComponentConfigurations array of the connection set structure. |
False |
|
OutboundFlowIndex |
0:Int32 |
Reference to the related communication flow in the CommunicationFlows array of the connection set structure. Any negative number indicates that no outbound is configured. |
True |
|
InboundFlowIndex |
0:Int32 [2] |
Reference to the related communication flow in the CommunicationFlows array (Publisher configuration) of the connection set structure (first index in the array) and to the contained SubscriberConfiguration (second in index in the array). |
True |
The ConnectionEndpointConfigurationConfDataType representation in the AddressSpace is formally defined in Table F.6.
Table F.6 – ConnectionEndpointConfigurationConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:ConnectionEndpointConfigurationConfDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
This abstract Structure DataType holds the information for an information flow.
It is semantically equivalent to the CommunicationFlowConfigurationType as defined in 6.13.2.
The CommunicationFlowConfigurationConfDataType is formally defined in Table F.7.
Table F.7 – CommunicationFlowConfigurationConfDataType structure
|
Name |
Type |
Description |
Optional |
|
CommunicationFlowConfigurationConfDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
BrowseName |
0:String |
BrowseName of the information flow. |
False |
|
FlowProperties |
0:KeyValuePair[] |
The KeyValuePair array provides additional configuration properties for the flow. |
True |
The CommunicationFlowConfigurationConfDataType representation in the AddressSpace is formally defined in Table F.8.
Table F.8 – CommunicationFlowConfigurationConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:CommunicationFlowConfigurationConfDataType |
|||||
|
IsAbstract |
True |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
This Structure DataType contains the configuration needed for both the publishing and subscribing of an information flow.
It is semantically equivalent to the PubSubCommunicationFlowConfigurationType as defined in 6.13.2.
The PubSubCommunicationFlowConfigurationConfDataType is formally defined in Table F.9.
Table F.9 – PubSubCommunicationFlowConfigurationConfDataType structure
|
Name |
Type |
Description |
Optional |
|
PubSubCommunicationFlowConfigurationConfDataType |
Structure |
Subtype of CommunicationFlowConfigurationConfDataType defined in F.1.4 |
|
|
Address |
4:AddressSelectionDataType |
Address specifies the destination network address to be used for transmission of NetworkMessages by the Publisher of the information flow. |
True |
|
TransportProfileUri |
0:String |
Optional TransportProfileUri specifies the transport protocol mapping and the message mapping to be used. If TransportProfileUri is omitted, the default transport protocol for the Address shall be used. |
True |
|
TransportProfileUriSelection |
0:String[] |
Selection list options for TransportProfileUri. |
True |
|
TransportProfileUriModify |
0:Boolean |
Flag indicating if the TransportProfileUri options can be modified. |
True |
|
HeaderLayoutUri |
0:String |
Optional HeaderLayoutUri specifies the UADP header formats for both NetworkMessages and DataSetMessages. If HeaderLayoutUri is omitted, a fixed layout for periodic data shall be used. |
True |
|
HeaderLayoutUriSelection |
0:String[] |
Selection list options for HeaderLayoutUri. |
True |
|
HeaderLayoutUriModify |
0:Boolean |
Flag indicating if the HeaderLayoutUri options can be modified. |
True |
|
PublishingInterval |
0:Duration |
PublishingInterval specifies the interval to be used for publishing NetworkMessages. |
True |
|
PublishingIntervalSelection |
0:Duration[] |
Selection list options for PublishingInterval. |
True |
|
PublishingIntervalModify |
0:Boolean |
Flag indicating if the PublishingInterval options can be modified. |
True |
|
Qos |
4:CommunicationFlowQosDataType |
The optional Qos specifies the Quality of Service to be used for the information flow. |
True |
|
QosSelection |
4:CommunicationFlowQosDataType[] |
Selection list options for Qos. |
True |
|
QosModify |
0:Boolean |
Flag indicating if the Qos options can be modified. |
True |
|
SecurityMode |
0:MessageSecurityMode |
The optional SecurityMode specifies the security mode to be used for the information flow. |
True |
|
SecurityModeSelection |
0:MessageSecurityMode[] |
Selection list options for SecurityMode. |
True |
|
SecurityModeModify |
0:Boolean |
Flag indicating if the SecurityMode options can be modified. |
True |
|
SecurityGroupId |
0:String |
The optional SecurityGroupId specifies the security group to be used for the information flow. |
True |
|
SecurityGroupIdSelection |
0:String[] |
Selection list options for SecurityGroupId. |
True |
|
SecurityGroupIdModify |
0:Boolean |
Flag indicating if the SecurityGroupId options can be modified. |
True |
|
SubscriberConfigurations |
4:SubscriberConfigurationConfDataType[] |
Defines the configuration for Subscriber(s) of the information flow. |
True |
The PubSubCommunicationFlowConfigurationConfDataType representation in the AddressSpace is formally defined in Table F.10.
Table F.10 – PubSubCommunicationFlowConfigurationConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:PubSubCommunicationFlowConfigurationConfDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 4:CommunicationFlowConfigurationConfDataType defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
This structure DataType describes the Subscriber-specific information for the Subscriber of an information flow.
It is semantically equivalent to the SubscriberConfigurationType as defined in 6.13.3.3.
The SubscriberConfigurationConfDataType is formally defined in Table F.11.
Table F.11 – SubscriberConfigurationConfDataType structure
|
Name |
Type |
Description |
Optional |
|
SubscriberConfigurationConfDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
BrowseName |
0:String |
BrowseName of the flow. |
False |
|
Address |
4:AddressSelectionDataType |
Address specifies the network address to be used for the reception of NetworkMessages at the Subscriber of the information flow. |
True |
|
MessageReceiveTimeout |
0:Duration |
MessageReceiveTimeout specifies the maximum acceptable time between DataSetMessages received by the Subscriber. |
False |
|
MessageReceiveTimeoutSelection |
0:Duration[] |
Selection list options for MessageReceiveTimeout. |
True |
|
MessageReceiveTimeoutModify |
0:Boolean |
Flag indicating if the MessageReceiveTimeout options can be modified. |
True |
|
ReceiveQos |
4:ReceiveQosSelectionDataType |
The optional ReceiveQos specifies the Quality of Service to be used for the Subscriber of the information flow. It shall only be present if Qos is present in the parent Object. |
True |
|
SubscriberProperties |
0:KeyValuePair[] |
The KeyValuePair array provides additional configuration properties for the flow. |
True |
The SubscriberConfigurationConfDataType representation in the AddressSpace is formally defined in Table F.12.
Table F.12 – SubscriberConfigurationConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:SubscriberConfigurationConfDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
This Structure DataType holds the information related to the AutomationComponent participating in a Connection.
It is semantically equivalent to the AutomationComponentConfigurationType as defined in 6.13.2.
The AutomationComponentConfigurationConfDataType is formally defined in Table F.13.
Table F.13 – AutomationComponentConfigurationConfDataType structure
|
Name |
Type |
Description |
Allow Subtypes |
|
AutomationComponentConfigurationConfDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
BrowseName |
0:String |
BrowseName of the AutomationComponent. |
False |
|
AutomationComponentNode |
4:NodeIdentifier |
AutomationComponentNode specifies the AutomationComponent that is to be used for establishing Connections. If a RelativePath is specified, the path shall be relative to FxRoot. |
False |
|
AutomationComponentNodeSelection |
4:NodeIdentifier[] |
Selection list options for AutomationComponentNode. |
False |
|
AutomationComponentNodeModify |
0:Boolean |
Flag indicating if the AutomationComponentNode options can be modified. |
False |
|
CommandBundleRequired |
0:Boolean |
CommandBundleRequired, when TRUE, specifies that the ConnectionManager shall bundle commands to this AutomationComponent. |
False |
|
AssetVerification |
4:AssetVerificationConfDataType[] |
The Asset verification parameters for Assets associated with the AutomationComponent. If the optional AssetVerification is not available, the field is null. |
False |
|
CommunicationModelConfig |
4:CommunicationModelConfigurationDataType |
Provides the ConfigurationData specific to the communication model utilized by the Connections. If the optional CommunicationModelConfig is to be omitted, the field shall be set to null. |
True |
|
AutomationComponentProperties |
0:KeyValuePair[] |
The KeyValuePair array provides additional configuration properties for the AutomationComponent. |
False |
|
ServerAddressIndex |
0:Int32 |
Reference to the related Server in the ServerAddresses array of the connection set structure. |
False |
The AutomationComponentConfigurationConfDataType representation in the AddressSpace is formally defined in Table F.14.
Table F.14 – AutomationComponentConfigurationConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:AutomationComponentConfigurationConfDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
This Structure DataType holds the information for the SecurityKeyServer.
The SecurityKeyServerAddressConfDataType is formally defined in Table F.15.
Table F.15 – SecurityKeyServerAddressConfDataType structure
|
Name |
Type |
Description |
Optional |
|
SecurityKeyServerAddressConfDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
Address |
0:UriString |
Address is specified as a DiscoveryUrl of the server to connect to for connection establishment. |
False |
|
AddressSelection |
0:UriString[] |
Selection list options for Address. |
True |
|
AddressModify |
0:Boolean |
Flag indicating if the Address options can be modified. |
True |
|
SecurityPolicyUri |
0:String |
SecurityPolicyUri is a string that contains the security policy to use when establishing the secure communication. |
False |
|
SecurityPolicyUriSelection |
0:String[] |
Selection list options for SecurityPolicyUri. |
True |
|
SecurityPolicyUriModify |
0:Boolean |
Flag indicating if the SecurityPolicyUri options can be modified. |
True |
|
ServerUri |
0:UriString |
ServerUri is a string that reflects the ApplicationUri of the Server. It can be used to cryptographically verify the Server. The ServerUri can also be a null string, in which case it will not be used to validate the Server. |
False |
|
ServerUriSelection |
0:UriString[] |
Selection list options for ServerUri. |
True |
|
ServerUriModify |
0:Boolean |
Flag indicating if the ServerUri options can be modified. |
True |
|
UsePushModel |
0:Boolean |
If TRUE, use the SKS push model. If FALSE, use the SKS pull model. |
False |
|
SecurityGroups |
0:SecurityGroupDataType[] |
Defines the security groups to be applied at the SKS for PubSub security configuration of this ConnectionConfigurationSet. |
True |
|
PubSubKeyPushTargets |
0:PubSubKeyPushTargetDataType[] |
Defines the push key targets to be applied at the SKS for PubSub security configuration of this ConnectionConfigurationSet. |
True |
|
SksProperties |
0:KeyValuePair[] |
The KeyValuePair array provides additional configuration properties for the SecurityKeyServer. |
True |
The SecurityKeyServerAddressConfDataType representation in the AddressSpace is formally defined in Table F.16.
Table F.16 – SecurityKeyServerAddressConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:SecurityKeyServerAddressConfDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
This Structure DataType holds the information for the Server address.
It is semantically equivalent to the ServerAddressType as defined in 9.2.2, except that the field Namespaces is added to the ServerAddressConfDataType. For the handling of this field, see F.1.2.2.
The ServerAddressConfDataType is formally defined in Table F.17.
Table F.17 – ServerAddressConfDataType structure
|
Name |
Type |
Description |
Optional |
|
ServerAddressConfDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
BrowseName |
0:String |
BrowseName of the Server address. |
False |
|
Address |
0:UriString |
Address is specified as a DiscoveryUrl of the server to connect to for connection establishment. |
False |
|
AddressSelection |
0:UriString[] |
Selection list options for Address. |
True |
|
AddressModify |
0:Boolean |
Flag indicating if the Address options can be modified. |
True |
|
SecurityMode |
0:MessageSecurityMode |
SecurityMode is the MessageSecurityMode to be used for establishing a secure communication to the Address. |
False |
|
SecurityModeSelection |
0:MessageSecurityMode[] |
Selection list options for SecurityMode. |
True |
|
SecurityModeModify |
0:Boolean |
Flag indicating if the SecurityMode options can be modified. |
True |
|
SecurityPolicyUri |
0:String |
SecurityPolicyUri is a string that contains the security policy to use when establishing the secure communication. |
False |
|
SecurityPolicyUriSelection |
0:String[] |
Selection list options for SecurityPolicyUri. |
True |
|
SecurityPolicyUriModify |
0:Boolean |
Flag indicating if the SecurityPolicyUri options can be modified. |
True |
|
ServerUri |
0:UriString |
ServerUri is a string that reflects the ApplicationUri of the Server. It can be used to cryptographically verify the Server. The ServerUri can also be a null string, in which case it will not be used to validate the Server. |
False |
|
ServerUriSelection |
0:UriString[] |
Selection list options for ServerUri. |
True |
|
ServerUriModify |
0:Boolean |
Flag indicating if the ServerUri options can be modified. |
True |
|
ServerProperties |
0:KeyValuePair[] |
The KeyValuePair array provides additional configuration properties for the Server. |
True |
|
Namespaces |
0:String[] |
Namespace table for translation of NodeIds and RelativePaths related to this Server. For further details, see F.1.2.2. |
False |
The ServerAddressConfDataType representation in the AddressSpace is formally defined in Table F.18.
Table F.18 – ServerAddressConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:ServerAddressConfDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
The AssetVerificationDataConfType is used to store the information needed for Asset verification.
It is semantically equivalent to the AssetVerificationType as defined in 6.15.2.
The AssetVerificationConfDataType is formally defined in Table F.19.
Table F.19 – AssetVerificationConfDataType structure
|
Name |
Type |
Description |
Optional |
|
AssetVerificationConfDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
AssetToVerify |
4:NodeIdentifier |
Specifies the expected Asset to be verified. If a RelativePath is specified, the path shall be relative to AutomationComponentNode. |
False |
|
VerificationMode |
2:AssetVerificationModeEnum |
The mode to use for the verification (compatibility and/or identity). |
False |
|
ExpectedVerificationResult |
2:AssetVerificationResultEnum |
The expected level of compatibility that this Asset shall provide |
False |
|
ExpectedVerificationVariables |
4:NodeIdentifierValuePair[] |
The variables to be verified for compatibility and/or identity. If a RelativePath is specified, the path shall be relative to the expected Asset. |
False |
|
ExpectedAdditionalVerificationVariables |
4:NodeIdentifierValuePair[] |
The additional variables to be verified for compatibility and/or identity. If a RelativePath is specified, the path shall be relative to the expected Asset. |
False |
|
AssetProperties |
0:KeyValuePair[] |
The KeyValuePair array provides additional configuration properties for the Asset verification. |
True |
The AssetVerificationConfDataType representation in the AddressSpace is formally defined in Table F.20.
Table F.20 – AssetVerificationConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:AssetVerificationConfDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
The CommunicationModelConfigurationDataType is formally defined in Table F.21.
It is semantically equivalent to the CommunicationModelConfigurationType as defined in 6.16.2.
Table F.21 – CommunicationModelConfigurationDataType structure
|
Name |
Type |
Description |
|
CommunicationModelConfigurationDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
The CommunicationModelConfigurationDataType representation in the AddressSpace is formally defined in Table F.22.
Table F.22 – CommunicationModelConfigurationDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:CommunicationModelConfigurationDataType |
|||||
|
IsAbstract |
True |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
The PubSubCommunicationModelConfigurationDataType is formally defined in Table F.23.
It is semantically equivalent to the PubSubCommunicationModelConfigurationType as defined in 6.16.3.2.
Table F.23 – PubSubCommunicationModelConfigurationDataType structure
|
Name |
Type |
Description |
|
PubSubCommunicationModelConfigurationDataType |
Structure |
Subtype of CommunicationModelConfigurationDataType defined in F.1.13. |
|
PubSubConfiguration |
0:PubSubConfiguration2DataType |
PubSub configuration for the addressed Server when establishing Connections. |
|
TranslationTable |
4:NodeIdTranslationDataType[] |
NodeIds contained in the PubSubConfiguration, which use the special namespace “http://opcfoundation.org/UA/FX/CM/Translation/”, are not valid NodeIds but placeholders which shall be resolved before the ConnectionManager can use the PubSubConfiguration for connection establishment. |
|
ConfigurationReferences |
0:PubSubConfigurationRefDataType[] |
ConfigurationReferences points to elements within the PubSubConfiguration and indicates whether they are to be added, matched, modified, or removed. |
The PubSubCommunicationModelConfigurationDataType representation in the AddressSpace is formally defined in Table F.24.
Table F.24 – PubSubCommunicationModelConfigurationDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:PubSubCommunicationModelConfigurationDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of CommunicationModelConfigurationDataType defined in F.1.13 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
The NodeIdentifier is used to store an identifier, where the identifier can be NodeId, Alias String, or a RelativePath.
It is semantically equivalent to the PortableNodeIdentifier as defined in 10.32, except it uses the optimization as described in F.1.2.2.
The NodeIdentifier DataType is formally defined in Table F.25.
Table F.25 – NodeIdentifier union
|
Name |
Type |
Description |
|
NodeIdentifier |
Union |
Subtype of Union defined in OPC 10000-5 |
|
Node |
0:NodeId |
The NamespaceIndex of the NodeId relates to the Namespaces in the ServerAddressConfDataType (see F.1.11) of the related Server. |
|
Alias |
0:String |
|
|
IdentifierBrowsePath |
0:RelativePath |
The IdentifierBrowsePath to the Node. The starting Node of the IdentifierBrowsePath shall be specified where this type is used. A NamespaceIndex in the RelativePath relates to the Namespaces in the ServerAddressConfDataType (see F.1.11) of the related Server. |
The NodeIdentifier representation in the AddressSpace is formally defined in Table F.26.
Table F.26 – NodeIdentifier definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:NodeIdentifier |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Union defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
The NodeIdentifierValuePair is used to provide a key-value pair where the key is a Variable Node.
It is semantically equivalent to the PortableKeyValuePair as defined in 10.31 with the optimization as described in F.1.2.2.
The NodeIdentifierValuePair DataType is formally defined in Table F.27.
Table F.27 – NodeIdentifierValuePair structure
|
Name |
Type |
Description |
|
NodeIdentifierValuePair |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
Key |
4:NodeIdentifier |
|
|
ArrayIndex |
0:UInt32[] |
If Key refers to a Variable with ValueRank >= 1, the ArrayIndex specifies the index for a specific value referenced by Key (Not the entire array, but a specific element in it). The ArrayIndex is required to have the same dimension as the dimension of the node. If Key is not of array type, or if no specific index shall be referenced, then the array shall be null or empty. |
|
Value |
0:BaseDataType |
The value associated with the key/array item. |
The NodeIdentifierValuePair representation in the AddressSpace is formally defined in Table F.28.
Table F.28 – NodeIdentifierValuePair definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:NodeIdentifierValuePair |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
This NodeIdTranslationConfDataType is used to provide table entries for conversion of NodeId to NodeIdentifier (see F.1.15).
It is semantically equivalent to the NodeIdTranslationDataType as defined in 10.29 with the optimization as described in F.1.2.2.
The NodeIdTranslationConfDataType is formally defined in Table F.29.
Table F.29 – NodeIdTranslationConfDataType structure
|
Name |
Type |
Description |
|
NodeIdTranslationConfDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
NodePlaceholder |
0:NodeId |
NodeId to be converted to the result of resolving the NodeIdentifier. |
|
Node |
4:NodeIdentifier |
Specifies the NodeIdentifier corresponding to the NodeId of the NodePlaceholder. |
The NodeIdTranslationConfDataType representation in the AddressSpace is formally defined in Table F.30.
Table F.30 – NodeIdTranslationConfDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:NodeIdTranslationConfDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
The AddressSelectionDataType holds the selection list for a network address (see F.1.2.3). It allows the address selection to be optional, where this DataType is used (see F.1.7 and F.1.8).
The AddressSelectionDataType is formally defined in Table F.31.
Table F.31 – AddressSelectionDataType structure
|
Name |
Type |
Description |
Allow Subtypes |
|
AddressSelectionDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
Address |
0:NetworkAddressDataType |
Network address configured. |
True |
|
AddressSelection |
0:NetworkAddressDataType[] |
Selection list options for Address. |
True |
|
AddressModify |
0:Boolean |
Flag indicating if the Address options can be modified. |
False |
The AddressSelectionDataType representation in the AddressSpace is formally defined in Table F.32.
Table F.32 – AddressSelectionDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:AddressSelectionDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||
The ReceiveQosSelectionDataType holds the selection list for a receive QoS configuration (see F.1.2.3). It allows making the receive QoS selection optional, where this DataType is used (see F.1.7 and F.1.8).
The ReceiveQosSelectionDataType is formally defined in Table F.33.
Table F.33 – ReceiveQosSelectionDataType structure
|
Name |
Type |
Description |
Allow Subtypes |
|
ReceiveQosSelectionDataType |
Structure |
Subtype of Structure defined in OPC 10000-5 |
|
|
ReceiveQos |
0:ReceiveQosDataType[] |
The ReceiveQos configuration. |
True |
|
ReceiveQosSelection |
0:BaseDataType |
Selection list options for ReceiveQos. The field will contain a matrix of subtypes of ReceiveQosDataType. If the field is not provided, it is null. |
False |
|
ReceiveQosModify |
0:Boolean |
Flag indicating if the ReceiveQos options can be modified. |
False |
The ReceiveQosSelection is of BaseDataType and thus requires a subtype to be used. The flag AllowSubtypes is only set if the type can be used as well as subtypes.
The ReceiveQosSelectionDataType representation in the AddressSpace is formally defined in Table F.34.
Table F.34 – ReceiveQosSelectionDataType definition
|
Attribute |
Value |
|||||
|
BrowseName |
4:ReceiveQosSelectionDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
Subtype of the 0:Structure defined in OPC 10000-5 |
||||||
|
ConformanceUnits |
||||||
|
UAFX ConnectionManager Configuration |
||||||