Table 85 – PnDeviceStateEnumeration
|
Name |
Description |
|
OFFLINE_0 |
The device is not online, or no information is available. The device is offline if no ARs other than possible Device Access AR’s exist. |
|
OFFLINE_DOCKING_1 |
The device is a docking device and currently not online. |
|
ONLINE_2 |
The device is online. This is the case if at least one AR other than possible Device Access AR’s exists. |
|
ONLINE_DOCKING_3 |
The device is a docking device and currently online. |
Table 86 – PnARStateEnumeration
|
Name |
Description |
|
CONNECTED_0 |
The AR connection to the device is established |
|
UNCONNECTED_1 |
The AR connection to the device is not established |
|
UNCONNECTED_ERR_DEVICE_NOT_FOUND_2 |
The AR connection to the device is not established because the device is not available in the network |
|
UNCONNECTED_ERR_DUPLICATE_IP_3 |
The AR connection to the device is not established because the IP address of the device exists multiple times |
|
UNCONNECTED_ERR_DUPLICATE_NOS_4 |
The AR connection to the device is not established because the Name of Station of the device exists multiple times |
Table 87 – PnARTypeEnumeration
|
Name |
Description |
|
IOCARSingle_0 |
- |
|
IOSAR_6 |
The supervisor AR is a special form of the IOCARSingle allowing takeover of the ownership of a submodule |
|
IOCARSingleUsingRT_CLASS_3_16 |
This is a special form of the IOCARSingle indicating RT_CLASS_3 communication |
|
IOCARSR_32 |
The SR AR is a special form of the IOCARSingle indicating system redundancy or dynamic reconfiguration usage |
See: [PN Protocol], Table 508 – ARType
Table 88 – PnModuleStateEnumeration
|
Name |
Description |
|
NO_MODULE_0 |
For example module not plugged |
|
WRONG_MODULE_1 |
For example ModuleIdentNumber wrong |
|
PROPER_MODULE_2 |
Module is okay but at least one submodule is locked, wrong or missing |
|
SUBSTITUTE_3 |
Module is not the same as requested – but the IO device was able to adapt by its own knowledge |
|
OK_4 |
Default state |
See: [PN Protocol], Table 586 – ModuleState
Table 89 – PnSubmoduleAddInfoEnumeration
|
Name |
Description |
|
NO_ADD_INFO_0 |
- |
|
TAKEOVER_NOT_ALLOWED_1 |
This Submodule is not available for takeover by IOSAR. |
See: [PN Protocol], Table 587 – SubmoduleState.AddInfo
Table 90 – PnSubmoduleARInfoEnumeration
|
Name |
Description |
|
OWN_0 |
This AR is owner of the submodule |
|
APPLICATION_READY_PENDING_128 |
This AR is owner of the submodule but it is blocked. For example parameter checking pending |
|
SUPERORDINATED_LOCKED_256 |
This AR is not owner of the submodule. It is blocked by superordinated means |
|
LOCKED_BY_IO_CONTROLLER_384 |
This AR is not owner of the submodule. It is owned by another IOAR |
|
LOCKED_BY_IO_SUPERVISOR_512 |
This AR is not owner of the submodule. It is owned by another IOSAR |
See: [PN Protocol], Table 592 – SubmoduleState.ARInfo
Table 91 – PnSubmoduleIdentInfoEnumeration
|
Name |
Description |
|
OK_0 |
OK |
|
SUBSTITUTE_2048 |
Substitute (SU) |
|
WRONG_4096 |
Wrong (WR) |
|
NO_SUBMODULE_6144 |
NoSubmodule (NO) |
See: [PN Protocol], Table 593 – SubmoduleState.IdentInfo
Table 92 – PnChannelTypeEnumeration
|
Name |
Description |
|
UNSPECIFIC_0 |
Shall be used if the field ChannelNumber contains the value 0x8000 (submodule)Furthermore, it shall be used if none of the below defined types are appropriate. |
|
1BIT_1 |
The data length of this channel is 1 Bit. |
|
2BIT_2 |
The data length of this channel is 2 Bit. |
|
4BIT_3 |
The data length of this channel is 4 Bit. |
|
8BIT_4 |
The data length of this channel is 8 Bit. |
|
16BIT_5 |
The data length of this channel is 16 Bit. |
|
32BIT_6 |
The data length of this channel is 32 Bit. |
|
64BIT_7 |
The data length of this channel is 64 Bit. |
See: [PN Protocol], Table 651 – ChannelProperties.Type
Table 93 – PnChannelAccumulativeEnumeration
|
Name |
Description |
|
SINGLE_0 |
Single channel Diagnosis only for the reported channel |
|
ACCUMULATIVE_256 |
Multiple channel Accumulative diagnosis from more than one channel |
See: [PN Protocol], Table 652 – ChannelProperties.Accumulative
Table 94 – PnChannelMaintenanceEnumeration
|
Name |
Description |
|
FAULT_0 |
Fault |
|
MAINTENANCE_REQUIRED_512 |
Maintenance required |
|
MAINTENANCE_DEMANDED_1024 |
Maintenance demanded |
|
USE_QUALIFIED_CHANNEL_QUALIFIER_1536 |
Use QualifiedChannelQualifier variable |
See: [PN Protocol], Table 653 – ChannelProperties.Maintenance
Table 95 – PnChannelSpecifierEnumeration
|
Name |
Description |
|
ALL_DISAPPEARS_0 |
The Diagnosis ASE contains no longer any entries (of any severity) for this channel |
|
APPEARS_2048 |
An event appears and/or exists further The Diagnosis ASE contains this and possible other entries for this channel. |
|
DISAPPEARS_4096 |
An event disappears and/or exists no longer The Diagnosis ASE contains no longer any entries of the same severity for this channel |
|
DISAPPEARS_OTHER_REMAIN_6144 |
An event disappears The Diagnosis ASE still contains other entries of the same severity for this channel |
See: [PN Protocol], Table 656 – ChannelProperties.Specifier
Table 96 – PnChannelDirectionEnumeration
|
Name |
Description |
|
MANUFACTURER_SPECIFIC_0 |
Manufacturer specific |
|
INPUT_CHANNEL_8192 |
Input |
|
OUTPUT_CHANNEL_16384 |
Output |
|
BIDIRECTIONAL_CHANNEL_24576 |
Input/Output |
See: [PN Protocol], Table 585 – ChannelProperties.Direction
Table 97 – PnAssetTypeEnumeration
|
Name |
Description |
|
DEVICE_0 |
Device |
|
MODULE_1 |
Real Module |
|
SUBMODULE_2 |
Real Submodule |
|
ASSET_3 |
Asset |
Table 98 – PnAssetChangeEnumeration
|
Name |
Description |
|
INSERTED_0 |
Asset has been added |
|
REMOVED_1 |
Asset has been removed |
|
CHANGED_2 |
Asset has been changed |
Table 99 – PnLinkStateEnumeration
|
Name |
Description |
|
UP_1 |
Ready to pass packets |
|
DOWN_2 |
No packets are passed |
|
TESTING_3 |
In some test mode |
|
UNKNOWN_4 |
Status cannot be determined |
|
DORMANT_5 |
In pending state waiting for some external event |
|
NOT_PRESENT_6 |
Port not present |
|
LOWER_LAYER_DOWN_7 |
Down due to lower layer |
Table 100 – PnPortStateEnumeration
|
Name |
Description |
|
UNKNOWN_0 |
Status cannot be determined |
|
DISABLED_DISCARDING_1 |
The port is administratively disabled and discarding frames |
|
BLOCKING_2 |
The port blocks incoming frames |
|
LISTENING_3 |
The port is listening to and sending BPDUs (Bridge Protocol Data Units). |
|
LEARNING_4 |
The port is listening for and processing BPDUs and starts learning MAC’s |
|
FORWARDING_5 |
The port is processing BPDUs and forwarding frames |
|
BROKEN_6 |
The port blocks incoming frames since a configuration error is detected |
Table 101 – IMTagSelectorEnumeration
|
Name |
Description |
|
FUNCTION_0 |
The Tag_Function argument shall be written. |
|
LOCATION_1 |
The Tag_Location argument shall be written. |
|
BOTH_2 |
Both arguments, Tag_Function and Tag_Location, shall be written. |