Figure 1 depicts the main ObjectTypes of the base device model and their relationship. The drawing is not intended to be complete. For the sake of simplicity only a few components and relations were captured to give a rough idea of the overall structure.

image004.png

Figure 1 – Device model overview

The boxes in this drawing show the ObjectTypes used in this specification as well as some elements from other specifications that help understand some modelling decisions. The upper grey box shows the OPC UA core ObjectTypes from which the TopologyElementType is derived. The grey box in the second level shows the main ObjectTypes that the device model introduces. The components of those ObjectTypes are illustrated only in an abstract way in this overall picture.

The grey box in the third level shows real-world examples as they will be used in products and plants. In general, such subtypes are defined by other organizations.

The TopologyElementType is the base ObjectType for elements in a device topology. Its most essential aspect is the functional grouping concept.

The ComponentType ObjectType provides a generic definition for a Device or parts of a Device where parts include mechanics and/or software. DeviceType is commonly used to represent field Devices.

Modular Devices are introduced to support subdevices and Block Devices to support Blocks. Blocks are typically used by field communication foundations as means to organize the functionality within a Device. Specific types of Blocks will therefore be specified by these foundations.

The ConfigurableObjectType is used as a general means to create modular topology units. If needed an instance of this type will be added to the head object of the modular unit. Modular Devices, for example, will use this ObjectType to organize their modules. Block-oriented Devices use it to expose and organize their Blocks.

Annex C describes guidelines for the usage of the device model as base for creating companion specifications as well as guidelines on how to combine different aspects of the same device – defined in different companion specifications – in one OPC UA application.

This ObjectType defines a generic model for elements in a device or component topology. Among others, it introduces FunctionalGroups, ParameterSet, and MethodSet. Figure 2 shows the TopologyElementType. It is formally defined in Table 12.

image005.png

Figure 2 – Components of the TopologyElementType

Table 12 – TopologyElementType definition

Attribute

Value

BrowseName

TopologyElementType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the BaseObjectType defined in OPC 10000-5

HasSubtype

ObjectType

ComponentType

Defined in 4.6

HasSubtype

ObjectType

BlockType

Defined in 4.11

HasSubtype

ObjectType

ConnectionPointType

Defined in 5.4

HasComponent

Object

<GroupIdentifier>

FunctionalGroupType

OptionalPlaceholder

HasComponent

Object

Identification

FunctionalGroupType

Optional

HasComponent

Object

Lock

LockingServicesType

Optional

HasComponent

Object

ParameterSet

BaseObjectType

Optional

HasComponent

Object

MethodSet

BaseObjectType

Optional

Conformance Units

DI Information Model

The TopologyElementType is abstract. There will be no instances of a TopologyElementType itself, but there will be instances of subtypes of this type. In this specification, the term TopologyElement generically refers to an instance of any ObjectType derived from the TopologyElementType.

FunctionalGroups are an essential aspect introduced by the TopologyElementType. FunctionalGroups are used to structure Nodes like Properties, Parameters and Methods according to their application such as configuration, diagnostics, asset management, condition monitoring and others.

FunctionalGroups are specified in 4.4.

A FunctionalGroup called Identification can be used to organize identification information of this TopologyElement (see 4.4.2). Identification information typically includes the Properties defined by the VendorNameplate or TagNameplate Interfaces and additional application specific information.

TopologyElements may also support LockingServices (defined in 7).

Clients shall use the LockingServices if they need to make a set of changes (for example, several Write operations and Method invocations) and where a consistent state is available only after all of these changes have been performed. The main purpose of locking a TopologyElement is avoiding concurrent modifications.

The lock applies to the complete TopologyElement (including all components such as blocks or modules). Servers may expose a Lock Object on a component TopologyElement to allow independent locking of components, if no lock is applied to the top-level TopologyElement.

If the Online/Offline model is supported (see 6.3), the lock always applies to both the online and the offline version.

ParameterSet and MethodSet are defined as standard containers for systems that have a flat list of Parameters or Methods with unique names. In such cases, the Parameters are components of the “ParameterSet” as a flat list of Parameters. The Methods are kept the same way in the “MethodSet”.

The MethodSet is only available if it includes at least one Method.

The components of the TopologyElementType have additional references as defined in Table 13.

Table 13 – TopologyElementType Additional Subcomponents

Source Path

References

NodeClass

BrowseName

DataType

TypeDefinition

Others

ParameterSet

HasComponent

Variable

<ParameterIdentifier>

BaseDataType

BaseDataVariableType

MandatoryPlaceholder

This subtype of the OPC UA FolderType is used to structure Nodes like Properties, Parameters and Methods according to their application (e.g. maintenance, diagnostics, condition monitoring). Organizes References should be used when the elements are components in other parts of the TopologyElement that the FunctionalGroup belongs to. This includes Properties, Variables, and Methods of the TopologyElement or in Objects that are components of the TopologyElement either directly or via a subcomponent. The same Property, Parameter or Method might be useful in different application scenarios and therefore referenced from more than one FunctionalGroup.

FunctionalGroups can be nested.

FunctionalGroups can directly be instantiated. In this case, the BrowseName of a FunctionalGroup should indicate its purpose. A list of recommended BrowseNames is in 4.4.2.

Figure 3 shows the FunctionalGroupType components. It is formally defined in Table 14.

image006.png

Figure 3 – FunctionalGroupType

Table 14 – FunctionalGroupType definition

Attribute

Value

BrowseName

FunctionalGroupType

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the FolderType defined in OPC 10000-5

HasComponent

Object

<GroupIdentifier>

FunctionalGroupType

OptionalPlaceholder

HasComponent

Variable

UIElement

BaseDataType

UIElementType

Optional

Conformance Units

DI Information Model

All BrowseNames for Nodes referenced by a FunctionalGroup with an Organizes Reference shall be unique.

The Organizes References may be present only at the instance, not the type. Depending on the current state of the TopologyElement the Server may decide to hide or unhide certain FunctionalGroups or (part of) their References. If a FunctionalGroup may be hidden on an instance the TypeDefinition shall use an appropriate ModellingRule like “Optional”.

If desirable, Nodes can be also children of FunctionalGroups. If such Nodes are defined, it is recommended to define a subtype of the FunctionalGroupType.

UIElement is the user interface element for this FunctionalGroup. See 4.4.3 for the definition of UIElements.

Examples in Annex B.1 illustrate the use of FunctionalGroups.

Table 15 includes a list of FunctionalGroups with name and purpose. If Servers expose a FunctionalGroup that corresponds to the described purpose, they should use the recommended BrowseName with the Namespace of this specification.

Table 15 – Recommended FunctionalGroup BrowseNames

BrowseName

Purpose

Configuration

Parameters representing the configuration items of the TopologyElement. If the CurrentWrite bit is set in the AccessLevel Attribute they can be modified by Clients.

Tuning

Parameters and Methods to optimize the behavior of the TopologyElement.

Maintenance

Parameters and Methods useful for maintenance operations.

Diagnostics

Parameters and Methods for diagnostics.

Statistics

Parameters and Methods for statistics.

Status

Parameters which describe the general health of the TopologyElement. This can include diagnostic Parameters.

Operational

Parameters and Methods useful for during normal operation, like process data.

OperationCounters

Parameters representing numbers of interest when managing a TopologyElement while it is operated.

Examples are the hours of operation, hours in standby, etc. Those are often the base to calculate KPIs (key performance indicators) like the OEE (overall equipment efficiency).

The Parameters are domain specific and not defined in this specification. Companion specifications or vendors will define them.This FunctionalGroup might be organized into other FunctionalGroups, so Clients shall expect that they need to browse several hops to get to all OperationCounters.

Identification

The Properties of the VendorNameplate Interface, like Manufacturer, SerialNumber or Properties of the TagNameplate will usually be sufficient as identification. If other Parameters or even Methods are required, all elements needed shall be organized in a FunctionalGroup called Identification. See Annex B.1 for an example.

Servers can expose UIElements providing user interfaces in the context of their FunctionalGroup container. Clients can load such a user interface and display it on the Client side. The hierarchy of FunctionalGroups represents the tree of user interface elements.

The UIElementType is abstract and is mainly used as filter when browsing a FunctionalGroup. Only subtypes can be used for instances. No concrete UIElements are defined in this specification. FDI (Field Device Integration, see IEC 62769) specifies two concrete subtypes

  • UIDs (UI Descriptions), descriptive user interface elements, and
  • UIPs (UI Plug-Ins), programmed user interface elements.

The UIElementType is specified in Table 16.

Table 16 – UIElementType definition

Attribute

Value

BrowseName

UIElementType

IsAbstract

True

DataType

BaseDataType

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the BaseDataVariableType defined in OPC 10000-5.

Conformance Units

DI Information Model

The Value attribute of the UIElement contains the user interface element. Subtypes have to define the DataType (e.g. XmlElement or ByteString).

This clause describes Interfaces with specific functionality that may be applied to multiple types at arbitrary positions in the type hierarchy.

Interfaces are defined in OPC 10001-7.

Figure 4 shows the Interfaces described in this specification.

image007.png

Figure 4 – Overview of Interfaces for Devices and Device components

IVendorNameplateType includes Properties that are commonly used to describe a TopologyElement from a manufacturer point of view. They can be used as part of the identification. The Values of these Properties are typically provided by the component vendor.

The VendorNameplate Interface is illustrated in Figure 5 and formally defined in Table 17.

image008.png

Figure 5 – VendorNameplate Interface

Table 17 – IVendorNameplateType definition

Attribute

Value

BrowseName

IVendorNameplateType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the BaseInterfaceType defined in OPC 10001-7

Product-specific Properties

HasProperty

Variable

Manufacturer

LocalizedText

PropertyType

Optional

HasProperty

Variable

ManufacturerUri

String

PropertyType

Optional

HasProperty

Variable

Model

LocalizedText

PropertyType

Optional

HasProperty

Variable

ProductCode

String

PropertyType

Optional

HasProperty

Variable

HardwareRevision

String

PropertyType

Optional

HasProperty

Variable

SoftwareRevision

String

PropertyType

Optional

HasProperty

Variable

DeviceRevision

String

PropertyType

Optional

HasProperty

Variable

DeviceManual

String

PropertyType

Optional

HasProperty

Variable

DeviceClass

String

PropertyType

Optional

Product instance-specific Properties

HasProperty

Variable

SerialNumber

String

PropertyType

Optional

HasProperty

Variable

ProductInstanceUri

String

PropertyType

Optional

HasProperty

Variable

RevisionCounter

Int32

PropertyType

Optional

HasProperty

Variable

SoftwareReleaseDate

DateTime

PropertyType

Optional

HasProperty

Variable

PatchIdentifiers

String[]

PropertyType

Optional

Conformance Units

DI Nameplate

Product type specific Properties:

Manufacturer provides the name of the company that manufactured the item this Interface is applied to. ManufacturerUri provides a unique identifier for this company. This identifier should be a fully qualified domain name; however, it may be a GUID or similar construct that ensures global uniqueness.

Model provides the name of the product.

ProductCode provides a unique combination of numbers and letters used to identify the product. It may be the order information displayed on type shields or in ERP systems.

HardwareRevision provides the revision level of the hardware. SemanticVersionString (a sub-type of String defined in OPC 10000-5) may be used when using the Semantic Versioning format.

SoftwareRevision provides the version or revision level of the software component, the software/firmware of a hardware component, or the software/firmware of the Device. SemanticVersionString (a sub-type of String defined in OPC 10000-5) may be used when using the Semantic Versioning format.

DeviceRevision provides the overall revision level of a hardware component or the Device. As an example, this Property can be used in ERP systems together with the ProductCode Property. SemanticVersionString (a sub-type of String defined in OPC 10000-5) may be used when using the Semantic Versioning format.

DeviceManual allows specifying an address of the user manual. It may be a pathname in the file system or a URL (Web address).

DeviceClass indicates in which domain or for what purpose a certain item for which the Interface is applied is used. Examples are “ProgrammableController”, “RemoteIO”, and “TemperatureSensor”. This standard does not predefine any DeviceClass names. More specific standards that utilize this Interface will likely introduce such classifications (e.g. IEC 62769, OPC 30000, or OPC 10020).

Product instance specific Properties:

SerialNumber is a unique production number provided by the manufacturer. This is often stamped on the outside of a physical component and may be used for traceability and warranty purposes.

ProductInstanceUri is a globally unique resource identifier provided by the manufacturer. This is often stamped on the outside of a physical component and may be used for traceability and warranty purposes. The maximum length is 255 characters. The recommended syntax of the ProductInstanceUri is: <ManufacturerUri>/<any string> where <any string> is unique among all instances using the same ManufacturerUri.

Examples: “some-company.com/5ff40f78-9210-494f-8206-c2c082f0609c”, “some-company.com/snr-16273849” or “some-company.com/model-xyz/snr-16273849”.

RevisionCounter is an incremental counter indicating the number of times the configuration data has been modified. An example would be a temperature sensor where the change of the unit would increment the RevisionCounter but a change of the measurement value would not affect the RevisionCounter.

SoftwareReleaseDate defines the date when the software is released. If the version information is about patches, this should be the date of the latest patch. It is additional information for the user.

PatchIdentifiers identify the list of patches that are applied to a software version. The format and semantics of the strings are vendor-specific. The order of the strings shall not be relevant.

Companion specifications may specify additional semantics for the contents of these Properties.

Table 18 specifies the mapping of these Properties to the International Registration Data Identifiers (IRDI) defined in ISO/ICE 11179-6. They should be used if a Server wants to expose a dictionary reference as defined in OPC 10001-5.

Table 18 – VendorNameplate Mapping to IRDIs

Property

IRDI

Manufacturer

0112/2///61987#ABA565#007

ManufacturerUri

0112/2///61987#ABN591#001

Model

0112/2///61987#ABA567#007

SerialNumber

0112/2///61987#ABA951#007

HardwareRevision

0112/2///61987#ABA926#006

SoftwareRevision

0112/2///61987#ABA601#006

DeviceRevision

-

RevisionCounter

0112/2///61987#ABN603#001

ProductCode

0112/2///61987#ABA300#006

ProductInstanceUri

0112/2///61987#ABN590#001

DeviceManual

-

DeviceClass

0112/2///61987#ABA566 - type of product

ITagNameplateType includes Properties that are commonly used to describe a TopologyElement from a user point of view.

The TagNameplate Interface is illustrated in Figure 6 and formally defined in Table 19.

image009.png

Figure 6 – TagNameplate Interface

Table 19 – ITagNameplateType definition

Attribute

Value

BrowseName

ITagNameplateType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the BaseInterfaceType defined in OPC 10001-7

HasProperty

Variable

AssetId

String

PropertyType

Optional

HasProperty

Variable

ComponentName

LocalizedText

PropertyType

Optional

Conformance Units

DI TagNameplate

AssetId is a user writable alphanumeric character sequence uniquely identifying a component. The ID is provided by the integrator or user of the device. It contains typically an identifier in a branch, use case or user specific naming scheme. This could be for example a reference to an electric scheme.

ComponentName is a user writable name provided by the integrator or user of the component.

Table 20 specifies the mapping of these Properties to the International Registration Data Identifiers (IRDI) defined in ISO/IEC 11179-6. They should be used if a Server wants to expose a dictionary reference as defined in OPC 10001-5.

Table 20 – TagNameplate Mapping to IRDIs

Property

IRDI

AssetId

0112/2///61987#ABA038 - identification code of device

ComponentName

0112/2///61987#ABA251 - designation of device

The DeviceHealth Interface includes Properties and Alarms that are commonly used to expose the health status of a Device. It is illustrated in Figure 7 and formally defined in Table 21.

image010.png

Figure 7 – DeviceHealth Interface

Table 21 – IDeviceHealthType definition

Attribute

Value

BrowseName

IDeviceHealthType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the BaseInterfaceType defined in OPC 10001-7

HasComponent

Variable

DeviceHealth

DeviceHealthEnumeration

BaseDataVariableType

Optional

HasComponent

Object

DeviceHealthAlarms

FolderType

Optional

Conformance Units

DI DeviceHealth

DeviceHealth indicates the status as defined by NAMUR Recommendation NE107. Clients can read or monitor this Variable to determine the device condition.

The DeviceHealthEnumeration DataType is an enumeration that defines the device condition. Its values are defined in Table 22.

Table 22 – DeviceHealthEnumeration values

Name

Value

Description

NORMAL

0

The Device functions normally.

FAILURE

1

Malfunction of the Device or any of its peripherals. Typically caused device-internal or is process related.

CHECK_FUNCTION

2

Functional checks are currently performed. Examples:

Change of configuration, local operation, and substitute value entered.

OFF_SPEC

3

"Off-spec" means that the Device is operating outside its specified range (e.g. measuring or temperature range) or that internal diagnoses indicate deviations from measured or set values due to internal problems in the Device or process characteristics.

MAINTENANCE_REQUIRED

4

Although the output signal is valid, the wear reserve is nearly exhausted or a function will soon be restricted due to operational conditions e.g. build-up of deposits.

DeviceHealthAlarms shall be used for instances of the DeviceHealth Alarm Types specified in 4.12.

DeviceHealthAlarms may also be used for other Alarm instances that relate to the health condition of the Device.

The SupportInfo Interface defines a number of additional data that a commonly exposed for Devices and their components. These include mainly images, documents, or protocol-specific data. The various types of information is organized into different folders. Each information element is represented by a read-only Variable. The information can be retrieved by reading the Variable value.

Figure 8 Illustrates the SupportInfo Interface. It is formally defined in Table 23.

image011.png

Figure 8 – Support information Interface

Table 23 – ISupportInfoType definition

Attribute

Value

BrowseName

ISupportInfoType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the BaseInterfaceType defined in OPC 10001-7

HasComponent

Object

DeviceTypeImage

FolderType

Optional

HasComponent

Object

Documentation

FolderType

Optional

HasComponent

Object

ProtocolSupport

FolderType

Optional

HasComponent

Object

ImageSet

FolderType

Optional

Conformance Units

DI DeviceSupportInfo

Clients need to be aware that the contents that these Variables represent may be large. Reading large values with a single Read operation may not be possible due to configured limits in either the Client or the Server stack. The default maximum size for an array of bytes is 1 megabyte. It is recommended that Clients use the IndexRange in the OPC UA Read Service (see OPC 10000-4) to read these Variables in chunks, for example, one-megabyte chunks. It is up to the Client whether it starts without an index and repeats with an IndexRange only after an error or whether it always uses an IndexRange.

The components of the ISupportInfoType have additional references as defined in Table 24.

Table 24 – ISupportInfoType Additional Subcomponents

Source Path

References

NodeClass

BrowseName

DataType

TypeDefinition

Others

DeviceTypeImage

HasComponent

Variable

<ImageIdentifier>

Image

BaseDataVariableType

MP

Documentation

HasComponent

Variable

<DocumentIdentifier>

ByteString

BaseDataVariableType

MP

ProtocolSupport

HasComponent

Variable

<ProtocolSupportIdentifier>

ByteString

BaseDataVariableType

MP

ImageSet

HasComponent

Variable

<ImageIdentifier>

Image

BaseDataVariableType

MP

Pictures can be exposed as Variables organized in the DeviceTypeImage folder. There may be multiple images of different resolutions. Each image is a separate Variable.

All images are transferred as a ByteString. The DataType of the Variable specifies the image format. OPC UA defines BMP, GIF, JPG and PNG (see OPC 10000-3).

Documents are exposed as Variables organized in the Documentation folder. In most cases they will represent a product manual, which can exist as a set of individual documents.

All documents are transferred as a ByteString. The BrowseName of each Variable will consist of the filename including the extension that can be used to identify the document type. Typical extensions are “.pdf” or “.txt”.

Protocol support files are exposed as Variables organized in the ProtocolSupport folder. They may represent various types of information as defined by a protocol. Examples are a GSD or a CFF file.

All protocol support files are transferred as a ByteString. The BrowseName of each Variable shall consist of the complete filename including the extension that can be used to identify the type of information.

Images that are used within UIElements are exposed as separate Variables rather than embedding them in the element. All image Variables will be aggregated by the ImageSet folder. The UIElement shall specify an image by its name that is also the BrowseName of the image Variable. Clients can cache images so they don't have to be transferred more than once.

The DataType of the Variable specifies the image format. OPC UA defines BMP, GIF, JPG and PNG (see OPC 10000-3).

Compared to DeviceType the ComponentType is more universal. It includes the same components but does not mandate any Properties. This makes it usable for representation of a Device or parts of a Device. Parts include both mechanical and software parts.

The ComponentType applies the VendorNameplate and the TagNameplate Interface. Figure 9 Illustrates the ComponentType. It is formally defined in Table 25.

image012.png

Figure 9 – ComponentType

Table 25 – ComponentType definition

Attribute

Value

BrowseName

ComponentType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the TopologyElementType defined in 4.3.

HasSubtype

ObjectType

DeviceType

Defined in 4.7.

HasSubtype

ObjectType

SoftwareType

Defined in 4.8.

HasInterface

ObjectType

IVendorNameplateType

Defined in 4.5.2.

HasInterface

ObjectType

ITagNameplateType

Defined in 4.5.3.

Applied from IVendorNameplateType

HasProperty

Variable

Manufacturer

LocalizedText

PropertyType

Optional

HasProperty

Variable

ManufacturerUri

String

PropertyType

Optional

HasProperty

Variable

Model

LocalizedText

PropertyType

Optional

HasProperty

Variable

ProductCode

String

PropertyType

Optional

HasProperty

Variable

HardwareRevision

String

PropertyType

Optional

HasProperty

Variable

SoftwareRevision

String

PropertyType

Optional

HasProperty

Variable

DeviceRevision

String

PropertyType

Optional

HasProperty

Variable

DeviceManual

String

PropertyType

Optional

HasProperty

Variable

DeviceClass

String

PropertyType

Optional

HasProperty

Variable

SerialNumber

String

PropertyType

Optional

HasProperty

Variable

ProductInstanceUri

String

PropertyType

Optional

HasProperty

Variable

RevisionCounter

Int32

PropertyType

Optional

Applied from ITagNameplateType

HasProperty

Variable

AssetId

String

PropertyType

Optional

HasProperty

Variable

ComponentName

LocalizedText

PropertyType

Optional

Conformance Units

DI Information Model

The ComponentType is abstract. DeviceType and SoftwareType are subtypes of ComponentType. There will be no instances of a ComponentType itself, only of concrete subtypes.

IVendorNameplateType and its members are described in 4.5.2.

ITagNameplateType and its members are described in 4.5.3.

This ObjectType can be used to define the structure of a Device. Figure 10 shows the DeviceType. It is formally defined in Table 26.

image013.png

Figure 10 – DeviceType

Table 26 – DeviceType definition

Attribute

Value

BrowseName

DeviceType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the ComponentType defined in 4.6

HasInterface

ObjectType

ISupportInfoType

Defined in 4.5.3.

HasInterface

ObjectType

IDeviceHealthType

Defined in 4.5.3.

HasComponent

Object

<CPIdentifier>

ConnectionPointType

OptionalPlaceholder

HasProperty

Variable

SerialNumber

String

PropertyType

Mandatory

HasProperty

Variable

RevisionCounter

Int32

PropertyType

Mandatory

HasProperty

Variable

Manufacturer

LocalizedText

PropertyType

Mandatory

HasProperty

Variable

Model

LocalizedText

PropertyType

Mandatory

HasProperty

Variable

DeviceManual

String

PropertyType

Mandatory

HasProperty

Variable

DeviceRevision

String

PropertyType

Mandatory

HasProperty

Variable

SoftwareRevision

String

PropertyType

Mandatory

HasProperty

Variable

HardwareRevision

String

PropertyType

Mandatory

HasProperty

Variable

DeviceClass

String

PropertyType

Optional

HasProperty

Variable

ManufacturerUri

String

PropertyType

Optional

HasProperty

Variable

ProductCode

String

PropertyType

Optional

HasProperty

Variable

ProductInstanceUri

String

PropertyType

Optional

Applied from IDeviceHealthType

HasComponent

Variable

DeviceHealth

DeviceHealthEnumeration

BaseDataVariableType

Optional

HasComponent

Object

DeviceHealthAlarms

FolderType

Optional

Applied from ISupportInfoType

HasComponent

Object

DeviceTypeImage

FolderType

Optional

HasComponent

Object

Documentation

FolderType

Optional

HasComponent

Object

ProtocolSupport

FolderType

Optional

HasComponent

Object

ImageSet

FolderType

Optional

Conformance Units

DI DeviceType

DeviceType is a subtype of ComponentType which means it inherits all InstanceDeclarations.

The DeviceType ObjectType is abstract. There will be no instances of a DeviceType itself, only of concrete subtypes.

ConnectionPoints (see 5.4) represent the interface (interface card) of a DeviceType instance to a Network. Multiple ConnectionPoints may exist if multiple protocols and/or multiple Communication Profiles are supported.

The Interfaces and their members are described in 4.5. Some of the Properties inherited from the ComponentType are declared mandatory for backward compatibility.

Although mandatory, some of the Properties may not be supported for certain types of Devices. In this case vendors shall provide the following defaults:

Clients can ignore the Properties when they have these defaults.

When Properties are not supported, Servers should initialize the corresponding Property declaration on the DeviceType with the default value. Relevant Browse Service requests can then return a Reference to this Property on the type definition. That way, no extra Nodes are needed.

This ObjectType can be used for software modules of a Device or a part of a Device. SoftwareType is a concrete subtype of ComponentType and can be used directly.

Figure 11 Illustrates the SoftwareType. It is formally defined in Table 27.

image014.png

Figure 11 – SoftwareType

Table 27 SoftwareType definition

Attribute

Value

BrowseName

SoftwareType

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the ComponentType defined in 4.6.

HasProperty

Variable

Manufacturer

LocalizedText

PropertyType

Mandatory

HasProperty

Variable

Model

LocalizedText

PropertyType

Mandatory

HasProperty

Variable

SoftwareRevision

String

PropertyType

Mandatory

Conformance Units

DI Software Component

SoftwareType is a subtype of ComponentType which means it inherits all InstanceDeclarations.

The Properties Manufacturer, Model, and SoftwareRevision inherited from ComponentType are declared mandatory for SoftwareType instances.

The DeviceSet Object is the starting point to locate Devices. It shall either directly or indirectly reference all instances of a subtype of ComponentType with a Hierarchical Reference. For complex Devices that are composed of various components that are also Devices, only the root instance shall be referenced from the DeviceSet Object. The components of such complex Devices shall be locatable by following Hierarchical References from the root instance. An example is the Modular Device defined in 9.4 and also illustrated in Figure 12.

Examples:

  • UA Server represents a monolithic or modular Device: DeviceSet only contains one instance
  • UA Server represents a host system that has access to a number of Devices that it manages: DeviceSet contains several instances that the host provides access to.
  • UA Server represents a gateway Device that acts as representative for Devices that it has access to: DeviceSet contains the gateway Device instance and instances for the Devices that it represents.
  • UA Server represents a robotic system consisting of mechanics and controls. DeviceSet only contains the instance for the root of the robotic system. The mechanics and controls are represented by ComponentType instances which are organized as sub-components of the root instance.

Figure 12 shows the AddressSpace organisation with this standard entry point and examples.

image015.png

Figure 12 – Standard entry point for Devices

The DeviceSet Node is formally defined in Table 28.

Table 28 – DeviceSet definition

Attribute

Value

BrowseName

DeviceSet

References

NodeClass

BrowseName

TypeDefinition

OrganizedBy by the Objects Folder defined in OPC 10000-5

HasTypeDefinition

ObjectType

BaseObjectType

Conformance Units

DI DeviceSet

The DeviceFeatures Object can be used to organize other functional entities that are related to the Devices referenced by the DeviceSet. Companion specifications may standardize such instances and their BrowseNames. Figure 13 shows the AddressSpace organisation with this standard entry point.

image016.png

Figure 13 – Standard entry point for DeviceFeatures

The DeviceFeatures Node is formally defined in Table 29.

Table 29 – DeviceFeatures definition

Attribute

Value

BrowseName

DeviceFeatures

References

NodeClass

BrowseName

TypeDefinition

OrganizedBy by the DeviceSet Object defined in 4.9

HasTypeDefinition

ObjectType

BaseObjectType

Conformance Units

DI DeviceSet

This ObjectType defines the structure of a Block Object. Figure 14 depicts the BlockType hierarchy. It is formally defined in Table 30.

image017.png

Figure 14 – BlockType hierarchy

FFBlockType and PROFIBlockType are examples. They are not further defined in this specification. It is expected that industry groups will standardize general purpose BlockTypes.

Table 30 – BlockType definition

Attribute

Value

BrowseName

BlockType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the TopologyElementType defined in 4.2

HasProperty

Variable

RevisionCounter

Int32

PropertyType

Optional

HasProperty

Variable

ActualMode

LocalizedText

PropertyType

Optional

HasProperty

Variable

PermittedMode

LocalizedText[]

PropertyType

Optional

HasProperty

Variable

NormalMode

LocalizedText[]

PropertyType

Optional

HasProperty

Variable

TargetMode

LocalizedText[]

PropertyType

Optional

Conformance Units

DI Blocks

BlockType is a subtype of TopologyElementType and inherits the elements for Parameters, Methods and FunctionalGroups.

The BlockType is abstract. There will be no instances of a BlockType itself, but there will be instances of subtypes of this Type. In this specification, the term Block generically refers to an instance of any subtype of the BlockType.

The RevisionCounter is an incremental counter indicating the number of times the static data within the Block has been modified. A value of -1 indicates that no revision information is available.

The following Properties refer to the Block Mode (e.g. “Manual”, “Out of Service”).

The ActualMode Property reflects the current mode of operation.

The PermittedMode defines the modes of operation that are allowed for the Block based on application requirements.

The NormalMode is the mode the Block should be set to during normal operating conditions. Depending on the Block configuration, multiple modes may exist.

The TargetMode indicates the mode of operation that is desired for the Block. Depending on the Block configuration, multiple modes may exist.

The DeviceHealth Property defined in 4.5.4 provides a basic way to expose the health state of a device based on NAMUR NE 107.

This section defines AlarmTypes that can be used to indicate an abnormal device condition together with diagnostic information text as defined by NAMUR NE 107 as well as additional manufacturer specific information.

Figure 15 informally describes the AlarmTypes for DeviceHealth.

image018.png

Figure 15 – Device Health Alarm type hierarchy

The DeviceHealthDiagnosticAlarmType is a specialization of the InstrumentDiagnosticAlarmType intended to represent abnormal device conditions as defined by NAMUR NE 107. This type can be used in filters for monitored items. Only subtypes of this type will be used in actual implementations. The Alarm becomes active when the device condition is abnormal. It is formally defined in Table 31.

Table 31 – DeviceHealthDiagnosticAlarmType definition

Attribute

Value

BrowseName

DeviceHealthDiagnosticAlarmType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the InstrumentDiagnosticAlarmType defined in OPC 10000-9.

HasSubtype

ObjectType

FailureAlarmType

Defined in clause 4.12.3

HasSubtype

ObjectType

CheckFunctionAlarmType

Defined in clause 4.12.4

HasSubtype

ObjectType

OffSpecAlarmType

Defined in clause 4.12.5

HasSubtype

ObjectType

MaintenanceRequiredAlarmType

Defined in clause 4.12.6

Conformance Units

DI HealthDiagnosticsAlarm

Conditions of subtypes of DeviceHealthDiagnosticAlarmType become active when the device enters the corresponding abnormal state.

The Message field in the Event notification shall be used for additional information associated with the health status (e.g. the possible cause of the abnormal state and suggested actions to return to normal).

A Device may be in more than one abnormal state at a time in which case multiple Conditions will be active.

The FailureAlarmType is formally defined in Table 32. For description of the FAILURE state see Table 22.

Table 32 – FailureAlarmType definition

Attribute

Value

BrowseName

FailureAlarmType

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the DeviceHealthDiagnosticAlarmType defined in 4.12.2.

Conformance Units

DI HealthDiagnosticsAlarm

The CheckFunctionAlarmType is formally defined in Table 33. For description of the CHECK_FUNCTION state see Table 22.

Table 33 – CheckFunctionAlarmType definition

Attribute

Value

BrowseName

CheckFunctionAlarmType

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the DeviceHealthDiagnosticAlarmType defined in 4.12.2.

Conformance Units

DI HealthDiagnosticsAlarm

The OffSpecAlarmType is formally defined in Table 34. For description of the OFF_SPEC state see Table 22.

Table 34 – OffSpecAlarmType definition

Attribute

Value

BrowseName

OffSpecAlarmType

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the DeviceHealthDiagnosticAlarmType defined in 4.12.2.

Conformance Units

DI HealthDiagnosticsAlarm

The MaintenanceRequiredAlarmType is formally defined in Table 35. For description of the MAINTENANCE_REQUIRED state see Table 22.

Table 35 – MaintenanceRequiredAlarmType definition

Attribute

Value

BrowseName

MaintenanceRequiredAlarmType

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the DeviceHealthDiagnosticAlarmType defined in 4.12.2.

Conformance Units

DI HealthDiagnosticsAlarm