Devices - 4.12 DeviceHealth Alarm Types

The DeviceHealth Property defined in 4.5.4 provides a basic way to expose the health state of a device based on NAMUR NE 107.

This section defines AlarmTypes that can be used to indicate an abnormal device condition together with diagnostic information text as defined by NAMUR NE 107 as well as additional manufacturer specific information.

Figure 15 informally describes the AlarmTypes for DeviceHealth.

Figure 15 – Device Health Alarm type hierarchy

4.12.2 DeviceHealthDiagnosticAlarmType

The DeviceHealthDiagnosticAlarmType is a specialization of the InstrumentDiagnosticAlarmType intended to represent abnormal device conditions as defined by NAMUR NE 107. This type can be used in filters for monitored items. Only subtypes of this type will be used in actual implementations. The Alarm becomes active when the device condition is abnormal. It is formally defined in Table 31.

Table 31 – DeviceHealthDiagnosticAlarmType definition

Attribute	Value
BrowseName	DeviceHealthDiagnosticAlarmType
IsAbstract	True
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule
Subtype of the InstrumentDiagnosticAlarmType defined in OPC 10000-9.
HasSubtype	ObjectType	FailureAlarmType	Defined in clause 4.12.3
HasSubtype	ObjectType	CheckFunctionAlarmType	Defined in clause 4.12.4
HasSubtype	ObjectType	OffSpecAlarmType	Defined in clause 4.12.5
HasSubtype	ObjectType	MaintenanceRequiredAlarmType	Defined in clause 4.12.6
Conformance Units
DI HealthDiagnosticsAlarm

Conditions of subtypes of DeviceHealthDiagnosticAlarmType become active when the device enters the corresponding abnormal state.

The Message field in the Event notification shall be used for additional information associated with the health status (e.g. the possible cause of the abnormal state and suggested actions to return to normal).

A Device may be in more than one abnormal state at a time in which case multiple Conditions will be active.

4.12.3 FailureAlarmType

The FailureAlarmType is formally defined in Table 32. For description of the FAILURE state see Table 22.

Table 32 – FailureAlarmType definition

Attribute	Value
BrowseName	FailureAlarmType
IsAbstract	False
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule
Subtype of the DeviceHealthDiagnosticAlarmType defined in 4.12.2.

Conformance Units
DI HealthDiagnosticsAlarm

4.12.4 CheckFunctionAlarmType

The CheckFunctionAlarmType is formally defined in Table 33. For description of the CHECK_FUNCTION state see Table 22.

Table 33 – CheckFunctionAlarmType definition

Attribute	Value
BrowseName	CheckFunctionAlarmType
IsAbstract	False
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule
Subtype of the DeviceHealthDiagnosticAlarmType defined in 4.12.2.

Conformance Units
DI HealthDiagnosticsAlarm

4.12.5 OffSpecAlarmType

The OffSpecAlarmType is formally defined in Table 34. For description of the OFF_SPEC state see Table 22.

Table 34 – OffSpecAlarmType definition

Attribute	Value
BrowseName	OffSpecAlarmType
IsAbstract	False
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule
Subtype of the DeviceHealthDiagnosticAlarmType defined in 4.12.2.

Conformance Units
DI HealthDiagnosticsAlarm

4.12.6 MaintenanceRequiredAlarmType

The MaintenanceRequiredAlarmType is formally defined in Table 35. For description of the MAINTENANCE_REQUIRED state see Table 22.

Table 35 – MaintenanceRequiredAlarmType definition

Attribute	Value
BrowseName	MaintenanceRequiredAlarmType
IsAbstract	False
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule
Subtype of the DeviceHealthDiagnosticAlarmType defined in 4.12.2.

Conformance Units
DI HealthDiagnosticsAlarm