OPC 40250-1: OPC UA for Compressed Air Systems

Part 1: Main Control Systems

Release 1.00.1
2021-07-13

Copyright (c) 2021 OPC Foundation
Generated on 7/18/2021 9:59:02 AM.

This document is subject to the license terms described here.

This document is a copy of the original which can be found here.

Table of Contents

1 Scope

2 Normative references

3 Terms, definitions, and conventions
    3.1 Overview
    3.2 OPC UA for Compressed Air Systems terms
        3.2.1 Airnet
        3.2.2 CASPart
        3.2.3 Component
        3.2.4 Compressed Air System
        3.2.5 ComponentClass
        3.2.6 Customer Distribution Point
        3.2.7 DeviceClass
        3.2.8 FunctionalGroup
        3.2.9 GroupName
        3.2.10 Integrated [Component]
        3.2.11 Isolated [Component]
        3.2.12 Main Control System
        3.2.13 Main Function [of a Component]
        3.2.14 Quantity
        3.2.15 Requirements [of an Airnet]
        3.2.16 Unavailable [Compressor]
    3.3 Abbreviated terms
    3.4 Conventions used in this document
        3.4.1 Conventions for Node descriptions
        3.4.2 NodeIds and BrowseNames
        3.4.3 Common Attributes

4 General information to Compressed Air Systems and OPC UA
    4.1 Introduction to Compressed Air Systems
    4.2 Introduction to OPC Unified Architecture
        4.2.1 What is OPC UA?
        4.2.2 Basics of OPC UA
        4.2.3 Information modelling in OPC UA

5 Use cases
    5.1 Device Identification
    5.2 Configuration
    5.3 Maintenance Management
    5.4 Energy Management
    5.5 Operation

6 OPC UA for Compressed Air Systems Information Model
    6.1 Model Overview
        6.1.1 Variables
        6.1.2 FunctionalGroups
    6.2 Compressed air conditions for downstream machines or systems
    6.3 Airnet Examples
    6.4 Identification
    6.5 Extending FunctionalGroups
    6.6 Alarms and Conditions
        6.6.1 Severity
    6.7 Adding new Components
    6.8 Asset Administration Shell for Compressed Air Systems – Main Control System

7 OPC UA ObjectTypes
    7.1 CASType ObjectType Definition
    7.2 AirnetsType ObjectType Definition
    7.3 ComponentsGroupType ObjectType Definition
    7.4 AirnetType ObjectType Definition
    7.5 AirnetComponentsType ObjectType Definition
    7.6 MCSType ObjectType Definition
    7.7 CASComponentType ObjectType Definition
    7.8 ChargingSystemType ObjectType Definition
    7.9 CompressorType ObjectType Definition
    7.10 ConverterType ObjectType Definition
    7.11 CoolingSystemType ObjectType Definition
    7.12 DrainType ObjectType Definition
    7.13 DryerType ObjectType Definition
    7.14 FilterType ObjectType Definition
    7.15 HeatRecoverySystemType ObjectType Definition
    7.16 ReceiverType ObjectType Definition
    7.17 SensorType ObjectType Definition
    7.18 SeparatorType ObjectType Definition
    7.19 ValveType ObjectType Definition
    7.20 ElectricalQuantitiesType ObjectType Definition
    7.21 ElectricalCircuitType ObjectType Definition
    7.22 FluidQuantitiesType ObjectType Definition
    7.23 ParticleType ObjectType Definition
    7.24 FluidCircuitType ObjectType Definition
    7.25 AnalysisType ObjectType Definition
        7.25.1 Trigger
    7.26 AnalysesType ObjectType Definition
    7.27 CalibrationType ObjectType Definition
    7.28 CASIdentificationType ObjectType Definition
    7.29 ConfigurationType ObjectType Definition
    7.30 AirnetConfigurationType ObjectType Definition
    7.31 MCSConfigurationType ObjectType Definition
        7.31.1 LoadConfigurationFile
        7.31.2 SaveConfigurationFile
    7.32 CommunicationSettingsType ObjectType Definition
    7.33 DesignType ObjectType Definition
    7.34 CompressorDesignType ObjectType Definition
    7.35 ConverterDesignType ObjectType Definition
    7.36 DrainDesignType ObjectType Definition
    7.37 DryerDesignType ObjectType Definition
    7.38 FilterDesignType ObjectType Definition
    7.39 ReceiverDesignType ObjectType Definition
    7.40 SensorDesignType ObjectType Definition
    7.41 SeparatorDesignType ObjectType Definition
    7.42 ValveDesignType ObjectType Definition
    7.43 EventsType ObjectType Definition
    7.44 MaintenanceType ObjectType Definition
    7.45 OperationalType ObjectType Definition
    7.46 AirnetOperationalType ObjectType Definition
    7.47 CompressorOperationalType ObjectType Definition
    7.48 ConverterOperationalType ObjectType Definition
    7.49 DrainOperationalType ObjectType Definition
        7.49.1 DrainTest
    7.50 DryerOperationalType ObjectType Definition
    7.51 ValveOperationalType ObjectType Definition
    7.52 StatisticsType ObjectType Definition
    7.53 CompressorStatisticsType ObjectType Definition

8 OPC UA DataTypes
    8.1 FilterClassDataType
    8.2 SensorTechnologyOptionSet
    8.3 CompressorTypeEnum
    8.4 ConverterTypeEnum
    8.5 DisplacementTypeEnum
    8.6 DrainTypeEnum
    8.7 DryerTypeEnum
    8.8 FilterClassEnum
    8.9 FilterTypeEnum
    8.10 FluidTypeEnum
    8.11 HealthStateEnum
    8.12 AirnetHealthStateEnum
    8.13 IntegratedStateEnum
    8.14 AirnetIntegratedStateEnum
    8.15 IpVersionEnum
    8.16 LubricationTypeEnum
    8.17 OperatingStateEnum
    8.18 AirnetOperatingStateEnum
    8.19 CompressorOperatingStateEnum
    8.20 DryerOperatingStateEnum
    8.21 ReceiverTypeEnum
    8.22 SensorTypeEnum
    8.23 SeparatorTypeEnum
    8.24 ValveTypeEnum

9 Profiles and ConformanceUnits
    9.1 Conformance Units
    9.2 Facets and Profiles
        9.2.1 Overview
        9.2.2 Server
        9.2.3 Client

10 Namespaces
    10.1 Namespace Metadata
    10.2 Handling of OPC UA Namespaces

Annex A (normative) OPC UA for Compressed Air Systems Namespace and mappings

Annex B (normative) Edge Cases for Component and Airnet Handling

Annex C (informative) Bibliography