10 DeviceZoneType ToC Previous Next

10.19 PumpControlMode ToC Previous Next

Description: Defines to which setpoint or function the pump is controlled. The TypeDefinition is MultiStateValueDiscreteType, so the Properties EnumValues and ValueAsText must be filled with the supported values out of Table 9.

Table 9 – Values for PumpControlMode

EnumValue ValueAsText Description
0 NORMAL Normal Operation: fixed pump rotational speed
1 AUTO Automatic adjustment of the pump rotational speed
2 SPEED Speed controlled: the pump is controlled according to the specified nominal value PumpSpeed
3 FLOW Flow rate controlled: the pump is controlled according to the specified nominal value FlowRate
4 TEMP_DIFF Temperature difference controlled: the pump is controlled according to the specified nominal value TemperatureDifference
5 PRESS_DIFF Pressure difference controlled: the pump is controlled according to the specified nominal value PressureDifference
6 BOOST Boost mode: the pump is operated at the maximum possible rotational pump speed

Previous Next