This Property represents the current status of the component. The ComponentStatusEnumeration is defined in Table 2.
Table 2 – ComponentStatusEnumeration Definition
|OFFLINE||0||Component is not connected to OPC UA server.
(Will not be set by component it-self, but e.g. by line control providing Information for the component)
|IDLE||1||Main switch on, no heating (also timer not running), no movement|
|PREPARING||2||Heating timer running, heating active, security check, setting, service mode|
|READY_TO_RUN||3||Temperature for switching drives on reached, drives ready for switching on|
|MANUAL_RUN||4||Component is running with manually set parameters|
|CONTROLLED_RUN||5||Component is running with controlled parameters|
|MALFUNCTION||6||Component has stopped running because of an error (also emergency stop), no re-start possible|
|MAINTENANCE||7||Component is maintained|