Search

6 result(s) for off

• OPC-40082-2 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 2: Hot runner devices
  15.1 SetValueActive
  SetValueActive A control zone is switched on and off with this parameter. ActualValueActive shows the current status of the controller. When it is switched on , the power control is realised ... with the predefined ControlType . When it is switched off , there is no power control and no alarms are generated for this zone. Only the actual temperature value is measured cyclically
• OPC-40082-4 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 4: Dosing Systems
  11.15 AbortCleaning
  cleaning sequence. If the device MachineryItemState is NotAvailable , the component State shall switch to Off , otherwise to Ready . Signature AbortCleaning(); Table 24 - AbortCleaning Method AddressSpace Definition Attribute Value BrowseName AbortCleaning
• OPC-40082-6 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 6: Granulate Drying Devices
  11.9 ActivateDesiccantBedController
  Server response is provided in the DesiccantBedControllerStatus Variable. When it is switched off , there is no power control. Only the actual temperature value is measured cyclically. Signature ActivateDesiccantBedController(); Table
• OPC-40082-6 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 6: Granulate Drying Devices
  11.10 DeactivateDesiccantBedController
  DeactivateDesiccantBedController Method to request the desiccant bed controller to be switched off. The Server response is provided in the DesiccantBedControllerStatus Variable. When it is switched off , there is no power
• OPC-40082-6 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 6: Granulate Drying Devices
  13.23 ActivateTemperatureController
  request the activation of the temperature controller of the bin. When it is switched off , there is no power control. Only the actual temperature value is measured cyclically. Signature ActivateTemperatureController
• OPC-40530 – OPC UA for Laser Systems
  7.2.4 LaserSystemState_StateMachine ObjectType Definition
  that Node. 0:HasProperty Variable 0:DefaultInstanceBrowseName 0:QualifiedName 0:PropertyType 0:HasComponent Object Off 0:StateType 0:HasComponent Object EnergySaving 0:StateType 0:HasComponent Object Idle 0:StateType ... Variable (inherited from StateMachineType) contains the information of the current State of the instance. Off is the state used to represent when a laser system is either completely shut down