Search

5 result(s) for Task

• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  7.1.2.1 Overview
  follows: Initialization : The Device is in its initializing sequence and cannot perform any other Task . Operate : The Device is in Operating mode. The LADS Client uses this mode for normal ... Shutdown : The Device is in its power-down sequence and cannot perform any other Task . Optionally, there are devices that can be powered off via physical means, especially simpler ones
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  7.1.10.1 Overview
  NameNodeIdDataType 0:PropertyType O Conformance Units LADS MaintenanceTaskType LastExecutionDate is the date when the Task was last performed. Optional, as the Task may have never run before. LastOperatingCycles ... recorded at the time of the last execution of the Task . LastOperatingTime is the total amount of operating time (as defined in Section 9.3 of EN 13306-2017) in milliseconds
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  7.1.10.2 ResetTask
  ResetTask The ResetTask Method resets the execution of the Task so that it is ready to be re-run. Optional, as instruments may not support resetting a maintenance task
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  7.1.10.3 StartTask
  StartTask The Start Method starts the execution of the Task . Optional, as instruments may not support starting a maintenance task via a method call. The same effect can be achieved
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  7.2.2 ResultType ObjectType Definition
  Method which initiates the program run. SupervisoryTaskId is the unique identifier of the specific Task in the supervisory system to which the result belongs. It is provided as an Argument