Search

5 result(s) for MaintenanceState

• OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics
  12.2 IMaintenanceEventType
  Subtype of the 0:BaseInterfaceType Type defined in OPC 10000-5 0:HasComponent Object MaintenanceState MaintenanceEvent StateMachineType M 0:HasProperty Variable PlannedDate 0:UtcTime PropertyType O 0:HasProperty Variable EstimatedDowntime ... ConfigurationChanged 0:Boolean PropertyType O Conformance Units AMB Current and Future Maintenance Activities The MaintenanceState provides the information if the maintenance activity is still planned, currently in execution
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  7.1.9.1 GotoMaintenance
  GotoMaintenance The GotoMaintenance Method brings the LADSDevice in the Maintenance state . The signature of this Method is specified below. Table 52 specifies its representation in the AddressSpace . Signature GotoMaintenance () Table
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  7.1.10.2 ResetTask
  means of a device-specific control. Upon successful execution of the ResetTask Method , the MaintenanceState shall be changed to Planned and an accompanying event shall be raised. Also, the ActiveState
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  7.1.10.3 StartTask
  means of a device-specific control. Upon successful execution of the Start Method , the MaintenanceState shall be changed to Executing and an accompanying event shall be raised. The signature
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  7.1.10.4 StopTask
  outcome of the maintenance task. Upon successful execution of the Stop Method , the MaintenanceState shall be changed to Finished and an accompanying event shall be raised. Also, the ActiveState