Wire Harness Manufacturing - 10.2.2 ObjectType definition

Table 30 – PartManagementType definition

Attribute	Value
BrowseName	PartManagementType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the BaseObjectType defined in the OPC10000-3; i.e., inherits the InstanceDeclarations of that Node.
HasComponent	Method	ClearPart			Mandatory
HasComponent	Variable	Terminals	3:ISA95MaterialDataType[]	BaseDataVariableType	Optional
HasComponent	Variable	Seals	3:ISA95MaterialDataType[]	BaseDataVariableType	Optional
HasComponent	Variable	Sleeves	3:ISA95MaterialDataType[]	BaseDataVariableType	Optional
HasComponent	Variable	Wires	3:ISA95MaterialDataType[]	BaseDataVariableType	Optional
HasComponent	Method	StorePart			Mandatory
HasComponent	Method	FindPartsByType			Optional
Conformance Units
WireHarness PartManagementType

Each Part represents an 3:ISA95MaterialDataType with the Properties shown in Table 15 (VECPartVersion and VECDocumentVersion).

Both Properties (VECPartVersion and VECDocumentVersion) must not provide by the server in the part Lists (Terminals, Seals, Sleeves, Wires) but need to be sent from the client to the server (in the method calls).

The Fields especially of the VECDocumentVersion structure depend on the kind of process and the Part. Table 31 - Table 33 show which fields need to be filled for each Part. The table has four columns. The first column displays the VEC attribute, the second provides an additional commonly used name, followed by a description and an indication of whether the parameter is always required or optional. The VEC attribute can be a direct child of the specification or a child of a subelement; in the latter case, it is separated by a "/".

Wires contain Part information for all wires. Table 31 contains the fields that must be given for this Parameter.

Terminals contain Part information for all terminals. Table 32 contains the fields that must be given for this Parameter.

Seals contain Part information for all seals. Table 33 contains the fields that must be given for this Parameter.

Table 31 – Fields of a Wire

Fields (VEC Attributes)	Alternative Name	Description	Optional/Mandatory field
WireElementSpecification/WireType	WireType	Defines the type of the wire. A wire must not have more than one type. This attribute allows more than one value because the same type can be expressed in multiple reference systems. WireType: Specifies a wire type. A wire type is always defined by a key value. Which wire type is meant by this key value is defined by a standard reference system.	Optional
ConductorSpecification/CrossSectionArea	CrossSection	Specifies the cross-section area of the conductor (e.g., 0.5 mm²). The cross-section area is a nominal value, which refers to the conducting properties of the conductor normalized to the properties of a full material core.	Mandatory
CoreSpecification/OutsideDiameter	ConductorDiameter	Specifies the outside diameter of the core.	Optional
WireElementSpecification/OutsideDiameter	IsoDiameter	Specifies the outside diameter of the WireElement.	Optional
InsulationSpecification/BaseColor	Color_1	Specifies the base color of the outer insulation.	Optional
InsulationSpecification/FirstIdentificationColor	Color_2	Specifies the first identification color of the outer insulation.	Optional
InsulationSpecification/SecondIdentificationColor	Color_3	Specifies the second identification color of the outer insulation.	Optional

Table 32 – Fields of a Terminal

Fields	Alternative Name	Description	Optional/Mandatory field
WireReceptionSpecification/CrimpConnectionLength	OverallCrimpingLength	Distance from the conductor tip (in the direction of the center of the wire) to the beginning of the terminal. Specifies the length of the crimp area, conductor, and insulation crimp (wire reception, see diagram "Terminal Dimensions").	Optional
TerminalSpecification/OverallLength	OverallTerminalLength	Used to circumnavigate obstacles. Specifies the overall length the terminal.	Optional
WireReceptionSpecification/CoreCrimpDetails/Size/Width	NominalCrimpWidth	Defines the expected size of the crimp. The height is measured in the direction of the crimp opening. The width is measured orthogonal to the height and orthogonal to the main axis of the terminal	Optional
WireReceptionSpecification/CoreCrimpDetails/Size/Width/Tolerance	NominalCrimpWidthRange	Specifies the tolerance for the CrimpWidth	Optional
GeneralTechnicalPartSpecification/BoundingBox	MaximalTerminalWidth	Defines the bounding box of the part. BoundingBox: The bounding box is defined for the processed state of the component, as it appears in the finished product. Therefore, it is valid to use the bounding box as simplified geometry of the component for viewing or simple DMU operations. For correct 3D positioning, the bounding may require transformation of the coordinate system of the component (see LocalGeometrySpecification.BoundingBoxPositioning). The bounding box defines the smallest cuboid (box) that can contain a described part completely. If a component has multiple variants, the bounding box is the smallest cuboid that can contain every variant, while maintaining the spatial orientation of the bounding box and component variants. It is valid to use the BoundingBox to describe the dimensions of a component, even if not all dimensions are known (e.g., only length and width). However, it must be possible to transform such a partial bounding box into a complete bounding box by adding the missing dimensions. Used to circumnavigate obstacles. The x,y,z coordinate of the Bouding Box are defined in the Figure 14.	Optional
*7:PartVersion/PrimaryPartType*	TerminalType	For display purposes.	Optional
WireReceptionSpecification/InsulationDisplacementLength	NominalStrippingLength	Specifies the length of the insulation which must be stripped off to fit to this wire reception. This overrides stripping parameters such as StripStartPosition	Optional
WireReceptionSpecification/InsulationDisplacementLength/Tolerance	NominalStrippingLengthRange	Specifies the tolerance for the dimension.	Optional

Figure 14 – Direction of a Terminal (based on VEC)

Table 33 – Fields of a Seal

Fields	Alternative Name	Description	Optional/Mandatory field
GeneralTechnicalPartSpecification/ColorInformation	SealColor	Specifies the color of the part.	Optional
GeneralTechnicalPartSpecification/BoundingBox	SealLength /GeometricSealWidth	Length of the seal	Mandatory