Wire Harness Manufacturing - 12.2 Process result related DataTypes

This section contains all DataTypes related to a Part.

This structure contains general result information for a process. Subtypes can add additional fields for process-specific output. This type can also be used by processes with no process-specific output. The structure is defined in Table 62.

The subtypes of the ProcessOutputDataType are used in the ResultData field of the ResultDataType.

If the ProcessOutputDataType (or a subtype of it) is used in the context of the ResultDataType, the ResultEvaluation must be used for the overall result.

Table 62 – ProcessOutputDataType Structure

Name	Type	Description	AllowSubtypes
ProcessOutputDataType	structure	Subtype of the 0:Structure defined in OPC 10000-3.
ToolInstance	String	The actual serial number of the process module or tool (process module or tool), identifying the specific equipment used in the process.	False

Its representation in the AddressSpace is defined in Table 63.

Table 63 – ProcessOutputDataType definition

Attribute		Value
BrowseName		ProcessOutputDataType
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the 0:Structure defined in OPC 10000-3.
Conformance Units
WireHarness ProcessOutputType

12.2.3 ForceCurvePointDataType

This structure provides a data point for a curve. The structure is defined in Table 66.

Note: This DataTypes is simillar tot he XVType but use only UInt32 for smaller memory storage

Table 64 – ForceCurvePointDataType Structure (with field that allows subtypes)

Name	Type	Description	Optional
ForceCurvePointDataType	structure	Subtype of the 0:Structure defined in OPC 10000-3.
X	0:UInt32[]	Position on the X axis of this value	False
Value	0:UInt32[]	The value itself	False

Its representation in the AddressSpace is defined in Table 67.

Table 65 – ForceCurveDataType definition

Attribute		Value
BrowseName		ForceCurvePointDataType
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the 0:Structure defined in OPC 10000-3.
Conformance Units
WireHarness CrimpOutputDataType

12.2.4 ForceCurveDataType

This structure provides data for a curve. The structure is defined in Table 66.

Table 66 – ForceCurveDataType Structure (with field that allows subtypes)

Name	Type	Description	Optional
ForceCurveDataType	structure	Subtype of the 0:Structure defined in OPC 10000-3.
Points	ForceCurvePointDataType[]	Contains the points of the curve.	False
EngineeringUnitsX	EUInformation	Contains the units of the x axis	False
EngineeringUnitsValue	EUInformation	Contains the units of the value axis	False

Its representation in the AddressSpace is defined in Table 67.

Table 67 – ForceCurveDataType definition

Attribute		Value
BrowseName		ForceCurveDataType
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the 0:Structure defined in OPC 10000-3.
Conformance Units
WireHarness CrimpOutputDataType

12.2.5 CrimpOutputDataType

This structure contains generated result information from the crimp process. The structure is defined in Table 68.

Table 68 – CrimpOutputDataType Structure

Name	Type	Description	AllowSubtypes
CrimpOutputDataType	structure	Subtype of ProcessOutputDataType defined in this specification.
ActualCrimpHeight	7:NumericalValue[1]	Measured value of the crimp height.	False
ActualCrimpWidth	7:NumericalValue[1]	Measured value of the crimp width.	False
ActualInsulationCrimpHeight	7:NumericalValue[1]	Measured insulation crimp height.	False
ActualCrimpForceCurve	ForceCurveDataType[1]	The actual crimp force curve for each crimp process. The NominalCrimp curve is sent back during the learning process.	False
ActualCrimpPullOutForce	7:NumericalValue[1]	During the learning process, a reference wire will be measured using a destructive test and this value is assumed for the entire job.	False

Its representation in the AddressSpace is defined in Table 69.

Table 69 – CrimpOutputDataType definition

Attribute		Value
BrowseName		CrimpOutputDataType
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the ProcessOutputDataType defined in this specification.
Conformance Units
WireHarness CrimpOutputDataType

12.2.6 CutOutputDataType

This structure contains generated result information from the cut process. The structure is defined in Table 70.

Table 70 – CutOutputDataType Structure (with field that allows subtypes)

Name	Type	Description	AllowSubtypes
CutOutputDataType	structure	Subtype of CutOutputDataType defined in this specification.
ActualLength	7:NumericalValue[1]	The actual length of the wire.	False

Its representation in the AddressSpace is defined in Table 71.

Table 71 – CutOutputDataType definition

Attribute		Value
BrowseName		CutOutputDataType
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the ProcessOutputDataType defined in this specification.
Conformance Units
WireHarness CutProcessOutputType

12.2.7 SealOutputDataType

This structure contains generated result information from the seal process. The structure is defined in Table 72.

Table 72 – SealOutputDataType Structure (with field that allows subtypes)

Name	Type	Description	AllowSubtypes
SealOutputDataType	structure	Subtype of ProcessOutputDataType defined in this specification.
ActualPosition	7:NumericalValue[1]	Actual seal position, relative to the cable tip.	False

Its representation in the AddressSpace is defined in Table 73.

Table 73 – SealOutputDataType definition

Attribute		Value
BrowseName		SealOutputDataType
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the ProcessOutputDataType defined in this specification.
Conformance Units
WireHarness SealOutputDataType

12.2.8 StripOutputDataType

This structure contains generated result information from the strip process. The structure is defined in Table 74.

Table 74 – StripOutputDataType Structure (with field that allows subtypes)

Name	Type	Description	AllowSubtypes
StripOutputDataType	structure	Subtype of ProcessOutputDataType defined in this specification.
ActualStrippingLength	7:NumericalValue[1]	Denotes the length of the wire that has been stripped. This measurement is crucial for subsequent processes and serves as a redundant definition used as an input parameter for strip monitoring processes.	False

Its representation in the AddressSpace is defined in Table 75.

Table 75 – StripOutputDataType definition

Attribute		Value
BrowseName		StripOutputDataType
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the ProcessOutputDataType defined in this specification.
Conformance Units
WireHarness StripOutputDataType