This enumeration WSProgramEnumerationType defines programs according to the Weihenstephan Standards. The WS DataPoint WS_Cur_Prog uses the WSProgramEnumerationType as data type and is defined as follows: Machine programs according to the Weihenstephan Standards.
The enumeration is defined in Table 26.
Table 26 – WSProgramEnumerationType Items
|
Name |
Value |
Description |
|
Undefined (No Program) |
0 |
The machine is switched on, but no program for a special application function has been selected yet or this machine is not needed. |
|
Production |
1 |
The machine functioning according to its specification. |
|
Start Up |
2 |
The machine is in the production start-up phase. This includes for example heating up or waiting for products. |
|
Run Down |
4 |
The machine is at the end of production and runs the machine empty. |
|
Clean |
8 |
A cleaning program is executed in the machine. |
|
Changeover |
16 |
The machine is changed over manually or automatically for the next product depending on parameters. |
|
Maintenance |
32 |
Maintenance and service work is performed on the machine. |
|
Break |
64 |
The machine is in a planned break. |
Its representation in the AddressSpace is defined in Table 27.
Table 27 – WSProgramEnumerationType Definiton
|
Attribute |
Value |
|||||
|
BrowseName |
WSProgramEnumerationType |
|||||
|
IsAbstract |
False |
|||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
|
Subtype of the Enumeration type defined in OPC 10000-5 |
||||||
|
0:HasProperty |
Variable |
0:EnumValues |
0: EnumValueType[] |
|
|
|