The Method SetDeltaCondition enables to adjust the delta condition of the relevant sensor of the WMTP. DeltaCondition represents the delta value that needs to be reached before the WMTP triggers the next measurement transmission. If the relevant sensor of the WMTP does not define the measurement triggering using the DeltaCondition, the default value 0 shall be assumed.

Signature

SetDeltaCondition (

[in]0:NumberDeltaValue

);

NOTE: The DeltaValue parameter must be adapted to the existing measured value of the WMTPMeasurementType. The EngineeringUnit and the DataType of the number must therefore also be used here in this input parameter of the method.

Table 53 – SetDeltaCondition Method Arguments

Argument	Description
DeltaValue	This value represents the new delta between one measurement point to the next that has to be set.

Table 54 – SetDeltaCondition Method AddressSpace Definition

Attribute	Value
BrowseName	SetDeltaCondition
References	Node Class	BrowseName	DataType	TypeDefinition	Other
0:HasProperty	Variable	InputArguments	Argument[]	0:PropertyType	M