The DefectDetectionSensorType represents a sensor or sensing system fitted to the machine module that detects product defects or a quality sampling point that can be triggered by an operator.
The DefectDetectionSensorType is formally defined in the following table.
Table 56 – DefectDetectionSensorType Definition
|
Attribute |
Value |
||||
|
BrowseName |
DefectDetectionSensorType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the TMCDeviceType, i.e. inheriting the Instance Declarations of that Node. |
|||||
|
0:HasComponent |
Object |
<SensorFunction> |
|
SensorFunctionType |
MP |
|
0:HasComponent |
Object |
Data |
|
0:FolderType |
O |
|
0:HasComponent |
Variable |
DetectionCountMasterTotal |
0:UInt64 |
0:BaseDataVariableType |
M, RO |
|
0:HasComponent |
Variable |
DetectionCountTotal |
0:UInt64 |
0:BaseDataVariableType |
M, RO, HR |
|
0:HasProperty |
Variable |
DetectionMode |
0:Boolean |
0:PropertyType |
M, RW |
|
0:HasComponent |
Method |
SetDetectionMode |
See below. |
O |
|
|
0:GeneratesEvent |
ObjectType |
DetectionModeChangeLogType |
|
|
|
|
Conformance Units |
|||||
|
TMC Quality Assurance and Control |
|||||
The components of the DefectDetectionSensorType are further described below.
|
BrowseName |
Description |
|
SensorFunction |
The sensor functions that the defect detection sensor or system is measuring. |
|
DetectionCountMasterTotal |
The total number of times a detection occurred. The total is never reset to zero. |
|
DetectionCountTotal |
The total number of times a detection occurred. The total is reset to zero only when the ResetProductionTotals method in the MachineModuleProductionType is executed successfully. |
|
DetectionMode |
When DetectionMode is True, the defect detection sensor or system detects defects and the inner sensor functions are enabled, meaning they can be active or not. When DetectionMode is False, the inner sensor functions are also not active. |
The components of the DefectDetectionSensorType have additional subcomponents which are defined in the following table.
Table 57 – DefectDetectionSensorType Additional Subcomponents
|
BrowsePath |
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
Others |
|
Data |
0:HasComponent |
Variable |
<DataItem> |
0:BaseDataType |
0:BaseDataVariableType |
OP, RO |
The Method SetDetectionMode enables or disables the defect detection sensor.
The signature of this Method is specified below. Table 58 specifies the Arguments representation.
Signature
SetDetectionMode (
[in] 0:Boolean Enable,
[out] MethodExecutionFeedbackType ExecutionFeedback);
Table 58 – SetDetectionMode Method Arguments
|
Argument |
Description |
|
Enable |
Specifies if the method enables, when True, or disables, when False, the defect detection sensor. |
|
ExecutionFeedback |
The extended feedback returning a detailed message in case of execution failure. |
The Method SetDetectionMode sets the DetectionMode of the defect detection sensor and of its components, i.e. sensor functions and defect reasons.