The MaterialRejectionPointType describes a device that is capable of rejecting product from the product flow. The MaterialRejectionPointType is formally defined in the following table.
Table 54 – MaterialRejectionPointType Definition
Attribute 
Value 

BrowseName 
MaterialRejectionPointType 

IsAbstract 
False 

References 
Node Class 
BrowseName 
DataType 
TypeDefinition 
Other 
Subtype of the TMCDeviceType, i.e. inheriting the Instance Declarations of that Node. 

0:HasProperty 
Variable 
MaterialDefinition 
MaterialDefinitionType 
0:PropertyType 
M, RO 
0:HasProperty 
Variable 
MES_ID 
0:String 
0:PropertyType 
M, RW 
0:HasComponent 
Variable 
RejectedMaterialMasterTotal 
0:Double 
MaterialQuantityVariableType 
M, RO 
0:HasComponent 
Variable 
RejectedMaterialTotal 
0:Double 
MaterialQuantityVariableType 
M, RO, HR 
0:HasComponent 
Variable 
RejectedMaterialRatio 
0:Double 
0:BaseDataVariableType 
M, RO 
0:HasComponent 
Variable 
RejectionCountMasterTotal 
0:UInt64 
0:BaseDataVariableType 
M, RO 
0:HasComponent 
Variable 
RejectionCountTotal 
0:UInt64 
0:BaseDataVariableType 
M, RO, HR 
0:HasProperty 
Variable 
RejectionMode 
0:Boolean 
0:PropertyType 
M, RW 
0:HasProperty 
Variable 
MaterialPointDefinition 
MaterialPointType 
0:PropertyType 
M, RO 
0:HasComponent 
Variable 
RejectionsRatio 
0:Double 
0:BaseDataVariableType 
M, RO, HR 
0:HasComponent 
Method 
SetRejectionMode 
See below. 
O 

0:GeneratesEvent 
ObjectType 
MaterialRejectedLogType 



0:GeneratesEvent 
ObjectType 
RejectionModeChangeLogType 



Conformance Units 

TMC Data Collection 
Additionally, references of type FlowsTo shall be implemented.
The components of the MaterialRejectionPointType are further described below.
BrowseName 
Description 
MaterialDefinition 
The material definition for the material to be rejected at the rejection trap. 
MES_ID 
Unique identifier for the material point in an external system, e.g. MES. 
RejectedMaterialMasterTotal 
The total material quantity rejected at the rejection trap. The total is never reset to zero. 
RejectedMaterialTotal 
The total material quantity rejected at the rejection trap. The total is reset to zero only when the ResetRejecitonTotals is invoked. 
RejectedMaterialRatio 
The Variable MaterialRejectedRatio is the ratio of the total material rejected (MaterialRejectedTotal) over the total good product and is computed by the underlying system. 
RejectionCountMasterTotal 
The total number of times the rejection trap was triggered. The total is never reset to zero. 
RejectionMode 
When RejectionMode is True, the rejection trap discharges material when triggered, otherwise no material is rejected. 
MaterialPointDefinition 
The Property MaterialPointDefinition contains the identification of the material point and the material that is processed. 
RejectionsRatio 
The Variable RejectionsRatio is the ratio between the good product output total and the rejected quantity total. 
RejectionCountTotal 
The total number of times the rejection trap was triggered. The total is reset to zero only when the ResetRejectionTotals is invoked. 