This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Surface Technology General Types.
Table 30 – Conformance Units for OPC UA for Surface Technology General Types
|
Category |
Title |
Description |
|
Server |
STBaseController Basic |
There is at least one instance of the STBaseControllerType on the OPC UA server with the optional Nodes StartUp and ShutDown implemented. |
|
Server |
STBaseController MachineryItemState |
There is at least one instance of the STBaseControllerType on the OPC UA server with the optional Node MachineryItemState implemented. |
|
Server |
STBaseController MachineryOperationMode |
There is at least one instance of the STBaseControllerType on the OPC UA server with the optional Node MachineryOperationMode implemented. |
|
Server |
STJobManagement Alias |
There is at least one instance of the STJobManagementType on the OPC UA server. The three optional Nodes STJobManagementAliases, AddAlias and RemoveAlias are implemented. |
Table 31 lists all Profiles defined in this document and defines their URIs.
Table 31 – Profile URIs for Surface Technology General Types
|
Profile |
URI |
|
STBaseController Advanced |
http://opcfoundation.org/UA-Profile/SurfaceTechnology/GeneralTypes/Server/STBaseControllerAdvanced |
The following sections specify the Facets available for Servers that implement the Surface Technology General Types companion specification. Each section defines and describes a Facet or Profile.
Table 32 defines a Profile that defines advanced support of the STBaseControllerType. All it’s optional nodes defined in this companion specification are implemented.
Table 32 – STBaseControllerAdvanced Server Profile
|
Group |
Conformance Unit / Profile Title |
Mandatory / Optional |
|
SurfaceTechnology/GeneralTypes |
STBaseController Basic |
M |
|
SurfaceTechnology/GeneralTypes |
STBaseController MachineryItemState |
M |
|
SurfaceTechnology/GeneralTypes |
STBaseController MachineryOperationMode |
M |