The PtOutputFilterAttributesType provides typical asset attributes for load-side filter functionality and is formally defined in Table 107.
Table 107 – PtOutputFilterAttributesType Definition
|
Attribute |
Value |
||||
|
BrowseName |
PtOutputFilterAttributesType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the PtAssetAttributesType defined in chapter 7.7 |
|||||
|
0:HasComponent |
Variable |
OutputFilterType |
0:UInt16 |
0:MultiStateValueDiscreteType |
M, RO |
|
0:HasComponent |
Variable |
OutputFilterPowerLoss |
0:Float |
0:AnalogUnitType |
O, RO |
|
Conformance Units |
|||||
|
Powertrain Attributes Information |
|||||
OutputFilterType provides the type of output filter in a powertrain. The values of the MultiStateValueDiscreteType variable are defined in Table 108 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.
Table 108 – PtOutputFilterAttributesType Attribute values for child Nodes
|
BrowsePath |
Value Attribute |
Description Attribute |
||
|
[ { "Value": 0, "DisplayName": "SINE_WAVE_FILTER", "Description": "Component is a sine-wave filter" }, { "Value": 1, "DisplayName": "DV_DT_FILTER", "Description": "Component is a dv/dt filter" } ] |
|
OutputFilterPowerLoss contains the power loss for the filter operated with rated current/power. The unit shall be watt [W].