FeedbackResolverPolePairNumber provides the number of pole pairs of the resolver.
FeedbackResolverExcitationVoltage provides the information of the excitation voltage as magnitude of the conversion from polar to rectangular coordinates. The unit shall be volt [V].
FeedbackResolverExcitationFrequency provides the excitation frequency of the system. The unit shall be hertz [Hz].
FeedbackResolverRatio provides the transformation ratio of the resolver. It is the ratio of the output voltage to the input voltage when the output voltage is at maximum magnetic coupling. It is a numerical value.
EncoderRotarySpeedMax provides the maximum value for rotational speed. Unit shall be revolution per minute [1/min].
ResolutionRotaryIncremental provides the number of pulses generated per revolution. The unit shall be pulses per revolution [ppr].
ResolutionSingleturnAbsolute provides the number of discrete positions generated by the encoder as unique angular positions of the shaft within one revolution. For example, 12 bits resolution provide 4096 unique angular position values per revolution. It is a numerical integer value.
ResolutionMultiturnAbsolute provides the total number of revolutions defining the total absolute range of the encoder. For example, 12 bit counts up to 4096 revolutions. It is a numerical integer value.
EncoderFlangeSize indicates on a shaft encoder the mounting diameter of the encoder flange, on a hollow shaft encoder the dimension of the pitch circle / the distance from the fixing point to the shaft center.
EncoderFlangeType defines the mechanical design of the flange relevant for the fixing of the encoder in order to avoid that the encoder rotates with the application shaft. For encoder which do not need a mechanical fixing to the application shaft choose “contactless encoder”, this is commonly the case for kit-encoders or linear encoders. The values of the MultiStateValueDiscreteType variable are defined in Table 82 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.
Table 82 – PtEncoderRotaryAttributesType Attribute values for child Nodes
|
BrowsePath |
Value Attribute |
Description Attribute |
||
|
[ { "Value": 0, "DisplayName": "CONTACTLESS", "Description": "Contactless encoder" }, { "Value": 1, "DisplayName": "SYNCHRO", "Description": "Synchro flange" }, { "Value": 2, "DisplayName": "CLAMPING", "Description": "Clamping flange" }, { "Value": 3, "DisplayName": "HOLLOW_SHAFT", "Description": "Hollow shaft flange" }, { "Value": 4, "DisplayName": "BLIND_HOLLOW", "Description": "Blind hollow shaft flange" }, { "Value": 5, "DisplayName": "SERVO_FLANGE", "Description": "Centered flange mount" }, { "Value": 6, "DisplayName": "FACE_MOUNT", "Description": "Face mount with torque compensator" } ] |
Contactless encoder |
||
|
[ { "Value": 0, "DisplayName": "THROUGH-HOLLOW", "Description": "Through hollow shaft type" }, { "Value": 1, "DisplayName": "BLIND-HOLLOW", "Description": "Blind hollow shaft type" }, { "Value": 2, "DisplayName": "TAPERED", "Description": "Tapered shaft type" }, { "Value": 3, "DisplayName": "STRAIGHT", "Description": "Straight shaft type" }, { "Value": 4, "DisplayName": "SOLID", "Description": "Solid shaft type" }, { "Value": 5, "DisplayName": "CONE", "Description": "Cone shaft type" } ] |
|
EncoderShaftType mechanical design to connect rotary encoder to a powertrain shaft. The values of the MultiStateValueDiscreteType variable are defined in Table 82shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.
The 0:EnumValues for the EncoderShaftType have additional CDD entries references which are defined in Table 83.
Table 83 – EncoderShaftType CDD Entries
|
SourceBrowsePath |
TargetBrowsePath |
|
|
|
|
OTHER
|
|
|
THROUGH-HOLLOW
|
|
|
BLIND-HOLLOW
|
|
|
SOLID
|
|
|
CONE
|
|
EncoderShaftSize provides the diameter value of the mounting shaft. The unit shall be millimeter [mm].