Identification
In the ExtrusionDeviceType, the Object MachineInformation (MachineInformationType from OPC 40083) has been replaced by Identification (MachineIdentificationType from OPC 40001-1).
Table 25 – Comparison of machine identification in v1.01 and v2.0
|
Version 1.01 MachineInformation |
|
Version 2.00 Identification |
|
|
Inherited from ComponentType |
|
||
|
Applied from IVendorNameplateType |
Applied from IVendorNameplateType |
||
|
Manufacturer |
mandatory (override in MachineInformationType) |
Manufacturer |
mandatory |
|
ManufacturerUri |
optional |
ManufacturerUri |
optional |
|
Model |
mandatory (override in MachineInformationType) |
Model |
mandatory (override in instance declaration of Identification Object in ExtrusionDeviceType ) |
|
ProductCode |
optional |
ProductCode |
optional |
|
HardwareRevision |
optional |
HardwareRevision |
optional |
|
SoftwareRevision |
optional |
SoftwareRevision |
optional |
|
DeviceRevision |
optional |
||
|
DeviceManual |
optional |
||
|
DeviceClass |
mandatory (override in MachineInformationType) |
DeviceClass |
mandatory (override in instance declaration of Identification Object in ExtrusionDeviceType ) |
|
SerialNumber |
mandatory (override in MachineInformationType) |
SerialNumber |
mandatory |
|
ProductInstanceUri |
optional |
ProductInstanceUri |
mandatory |
|
RevisionCounter |
optional |
||
|
|
|
|
|
|
Applied from ITagNameplateType |
Applied from ITagNameplateType |
||
|
AssetId |
optional |
AssetId |
optional |
|
ComponentName |
optional |
ComponentName |
optional |
|
|
|
|
|
|
Added in MachineInformationType (OPC 40083) |
|
||
|
ControllerName |
mandatory |
ControllerName |
Added in instance declaration of Identification Object in ExtrusionDeviceType |
|
SupportedLogbookEvents |
mandatory |
SupportedLogbookEvents |
Addid in ExtrusionDeviceType |
|
|
|
|
|
|
|
|
Additional Properties from IMachineryItemVendorNameplateType |
|
|
YearOfConstruction |
optional |
||
|
MonthOfConstruction |
optional |
||
|
InitialOperationDate |
optional |
||
|
|
|
|
|
|
|
|
Additional Property from IMachineTagNameplateType |
|
|
Location |
optional |
||
Status
In the ExtrusionDeviceType, the Variable Status has been replaced by the two state machines MachineryItemState and MachineryOperationMode (see OPC 40001-1). The state machine MachineryItemState is extended by a sub state machine ExtrusionExecutingSubState.
As the status information is now split into two states, there is no one-to-one relation between the old states in version 1.01 and the new ones in version 2.0. For example, MALFUNCTION and MAINTENANCE which are separate states in version 1.01 can occur at the same time with the MachineryItemState OutOfService and MachineryOperationMode Maintenance when there is an error during maintenance.
Table 26 – Comparison of machine status in v1.01 and v2.0
|
Version 1.01ExtrusionDeviceType Status |
Version 2.00 Identification |
||
|
Name |
Value |
||
|
OFFLINE |
0 |
NotAvailable |
|
|
IDLE |
1 |
NotExecuting |
|
|
PREPARING |
2 |
Executing (with any substate) |
Setup |
|
READY_TO_RUN |
3 |
Executing with sub state ReadyToRun |
Processing |
|
MANUAL_RUN |
4 |
Executing with sub state ManualRun |
Processing |
|
CONTROLLED_RUN |
5 |
Executing with sub state ControlledRun |
Processing |
|
MALFUNCTION |
6 |
OutOfService |
|
|
MAINTENANCE |
7 |
Maintenance |
|