This Enumeration specifies the values to be used in the Classification property in the MessageConditionType and related logbook events to indicate which machine part has caused the message. These events are fired by the instance of the ExtrusionDeviceType and are defined in OPC 40083.
Table 9 – ExtrusionMessageClassificationEnumeration Definition
|
Name |
Value |
Description |
|
OTHER |
0 |
This value is used if none of the other entries below apply. |
|
LINE_CONTROL |
1 |
Line control |
|
MATERIAL_HANDLING |
2 |
Material handling (from silo to processing machine) |
|
PRE_HEATING |
3 |
Pre-heating, drying of input material |
|
FEEDING |
4 |
Feeding unit |
|
DOSING |
5 |
Dosing unit |
|
EXTRUDER |
6 |
Extruder |
|
VACUUM_STATION |
7 |
Vacuum station |
|
FILTER |
8 |
Filter |
|
MELT_PUMP |
9 |
Melt pump |
|
DIE |
10 |
Profile die, pipe die, … |
|
COOLING |
11 |
Cooling |
|
HAUL_OFF |
12 |
Haul-off |
|
CORRUGATOR |
13 |
Corrugator |
|
SAW |
14 |
Saw |
|
CALIBRATION |
15 |
Calibration |
|
ROLL_STACK |
16 |
Roll stack |
|
MDO |
17 |
Machine direction orientation |
|
BIAX |
18 |
Biaxial orientation |
|
CUTTING |
19 |
Cutting |
|
WINDER |
20 |
Winder |
|
PELLETIZING |
21 |
Pelletizing |
|
DRYER |
22 |
Drying of product/output material (e.g. after underwater cutting) |
|
HANDLING_SYSTEM |
23 |
Handling system for produced products (e.g. robot stacking profiles) |
|
LAMINATION_SYSTEM |
24 |
Lamination system |
|
MEASURING_SYSTEM |
25 |
Measuring System (e.g. thickness measurement) |
|
QUALITY_SYSTEM |
26 |
Quality system (e.g. camera inspection) |
|
MANUAL_INSPECTION |
27 |
Manual inspection (message generated due to quality input by the operator) |
|
MANUAL_OPERATION |
28 |
Manual operation (message generated due to action of the operator, e.g. changing of machine mode) |