This OPC UA ObjectType is used for the root Object representing an extrusion line as overall system. It is formally defined in Table 1.

The instance(s) of ExtrusionLine_InterfaceType shall be located under the DeviceSet Object of the Server (see OPC UA Part 100).

NOTE: In most cases the OPC UA server will be implemented in the line control of the extrusion line so only one instance of ExtrusionLine_InterfaceType will be created. But it is also possible that one OPC UA server is connected to several extrusion lines as one interface to the MES. In this case several instances of ExtrusionLine_InterfaceType will be created.

image006.gif

Figure 1 – ExtrusionLine_MES_InterfaceType Overview

Table 1 – ExtrusionLine_InterfaceType Definition

Attribute

Value

BrowseName

ExtrusionLine_InterfaceType

IsAbstract

False

References

Node Class

BrowseName

DataType

TypeDefinition

Other

Subtype of 0:BaseObjectType defined in OPC UA Part 5

0:HasProperty

Variable

LineId

String

0:PropertyType

M, RW

0:HasProperty

Variable

LineStatus

ProductionStatusEnumeration

0:PropertyType

M

0:HasComponent

Object

MachineInformation

3:MachineInformationType

M

0:HasComponent

Object

MachineConfiguration

3:MachineConfigurationType

M

0:HasComponent

Object

MachineMESConfiguration

3:MachineMESConfigurationType

M

0:HasComponent

Object

MESMessage

3:MESMessageType

O

0:HasComponent

Method

SetMESMessage

O

0:HasComponent

Method

ClearMESMessage

O

0:HasComponent

Object

Users

3:UsersType

M

0:HasProperty

Variable

ConfigurationParameters

ConfigurationParameterType[]

0:PropertyType

M, RO

0:HasComponent

Object

MaterialList

3:MaterialListType

M

0:HasComponent

Object

ProductionParameters

ProductionParametersType

M

0:HasComponent

Object

JobGroups

JobGroupsType

O

0:HasComponent

Object

ProductionDataset Management

3:ProductionDatasetManagementType

O

0:GeneratesEvent

ObjectType

3:LogbookEventType

Defined in OPC 40083

0:GeneratesEvent

ObjectType

3:MessageConditionType

Defined in OPC 40083

The BrowseName of the object instance shall be "ExtrusionLine_<Manufacturer>_<SerialNumber>"

Example: "ExtrusionLine_battenfeld_4".