This Method is used as part of the PackMLExecuteStateMachineType. It allows an OPC UA Client to change the state of this state machine to the Holding state.
Signature
Hold(
);
Method result codes are defined in Table 51
Table 51 - Hold Method result codes
|
Result Code |
Description |
|
Bad_MethodInvalid |
See OPC 10000-4 – Services for the description of this result code. (The Method id does not refer to a Method for the specified Object.) |
|
Bad_NotImplemented |
See OPC 10000-4 – Services for the description of this result code. (Requested operation is not implemented.) |
|
Bad_NodeIdUnknown |
See OPC 10000-4 – Services for the description of this result code. (Used to indicate that the specified Object is not valid) |
|
Bad_InvalidState |
See OPC 10000-4 – Services for the description of this result code. (The operation cannot be completed because the Object is closed, uninitialized or in some other invalid state.) |
|
Bad_MethodInvalid |
See OPC 10000-4 – Services for the description of this result code. (The Method id does not refer to a Method for the specified Object.) |
Table 52 specifies the AddressSpace representation for the Hold Method. Hold has no input or output parameters and has no referenced objects or variables.
Table 52 – Hold Method AddressSpace Definition
|
Attribute |
Value |
||||
|
BrowseName |
Hold |
||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
ModellingRule |
|
|
|
|
|
|
|
|
|
|
|
|
|
|