[DEPRECATED in version 1.02] The ProductionType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
As a minimal implementation please only instantiate the mandatory variables. Set NumberInList to the value 0, fill Name according to the mapping in Annex B.2 and implement State, as described below in the respective sections.
The ProductionType is used to structure information given in the MachineToolType. It groups the information about the production plan and the production statistics.
The ProductionType is formally defined in Table 36.
Table 36 – ProductionType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ProductionType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the 0:BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node. |
|||||
|
0:HasComponent |
Object |
ProductionPlan |
|
ProductionJobListType |
O |
|
0:HasComponent |
Object |
ActiveProgram |
|
ProductionActiveProgramType |
M |
|
0:HasComponent |
Object |
Statistics |
|
ProductionStatisticsType |
O |
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
Conformance Units |
|||||
|
MachineTool MachineToolType Mandatory Nodes |
|||||
|
MachineTool Production Basic |
|||||
ProductionPlan is a list of all job elements currently running and planned for execution.
If there is no job on the machine, there may be no ProductionJob object in the list.
In case the ProductionPlan is used as a dynamic list (i.e., ProductionJobType nodes are being added and deleted), the precondition for deleting any node is that all values of variables represent the final state of the job and are sent to all clients in active subscriptions.
ActiveProgram contains the program that is currently running on the machine. If the machine control discriminates between main and subprograms, this program shall be the main program. It is used in parallel to the ProductionPlan, so it allows for an access of the running program without browsing the jobs in the ProductionPlan. The 0:NumberInList Property of the ActiveProgram shall match the one used in the ProductionPlan for the same program. If the ProductionPlan is not used, it shall be 0.
Statistics is the object that contains statistics information related to production.
[DEPRECATED in version 1.02] The ProductionJobListType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
The ProductionJobListType is a type used for structuring objects of ProductionJobType in an ordered list structure.
The ProductionJobListType is formally defined in Table 37.
Table 37 – ProductionJobListType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ProductionJobListType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the 0:OrderedListType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node. |
|||||
|
0:HasOrderedComponent |
Object |
0:<OrderedObject> |
|
ProductionJobType |
OP |
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
Conformance Units |
|||||
|
MachineTool Production Job |
|||||
|
MachineTool Production Dynamic Job List |
|||||
|
MachineTool Production Job Available |
|||||
0:<OrderedObject > is a placeholder for any number of ProductionJobType instances. To indicate the order of jobs on the machine, the 0:NumberInList parameter of the ProductionJobType is used. This index shall be 0 for the first list element and increase by one for each subsequent list element. If jobs are deleted from the list or inserted into the list, the 0:NumberInList has to be adjusted for all following ProductionJobType instances in the list, such that the 0:NumberInList elements always form a sequential series of numbers. For the DisplayName of the 0: <OrderedObject >, it is recommended to use the value of the Identifier Property of the respective ProductionJobType instance.
The 0:NodeVersion and the 0:GeneralModelChangeEventType inherited from the 0:OrderedListType are intended to be used in the way defined in OPC 10000-3 and 7.3.
[DEPRECATED in version 1.02] The ProductionJobType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
The ProductionJobType provides aggregated production data for running a sequence to produce several parts after one preparation mounting.
Examples for such a mounting are putting four raw parts on a pallet for a machining centre, setting up the fitting diameter bars in a turning centre bar feeder or loading a metal sheet from which hundreds of parts can be cut or punched. This sequence shall represent several parts which will usually (but not always) be several identical products. A job may be executed several times.
The ProductionJobType is formally defined in Table 38.
Table 38 – ProductionJobType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ProductionJobType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the 0:BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node |
|||||
|
0:HasProperty |
Variable |
CustomerOrderIdentifier |
0:String |
0:PropertyType |
O, RO |
|
0:HasProperty |
Variable |
Identifier |
0:String |
0:PropertyType |
M, RO |
|
0:HasProperty |
Variable |
OrderIdentifier |
0:String |
0:PropertyType |
O, RO |
|
0:HasComponent |
Variable |
PartsCompleted |
0:UInt32 |
0:BaseDataVariableType |
O, RO |
|
0:HasComponent |
Object |
PartSets |
|
0:BaseObjectType |
O |
|
0:HasComponent |
Variable |
PartsGood |
0:UInt32 |
0:BaseDataVariableType |
O, RO |
|
0:HasComponent |
Object |
ProductionPrograms |
|
0:OrderedListType |
M |
|
0:HasComponent |
Variable |
RunsCompleted |
0:UInt32 |
0:BaseDataVariableType |
M, RO |
|
0:HasComponent |
Variable |
RunsPlanned |
0:UInt32 |
0:BaseDataVariableType |
M, RO |
|
0:HasComponent |
Object |
State |
|
ProductionJobStateMachineType |
M |
|
0:HasInterface |
ObjectType |
0:IOrderedObjectType |
|
|
|
|
|
|
|
|
|
|
|
Applied from 0:IOrderedObjectType |
|||||
|
0:HasProperty |
Variable |
0:NumberInList |
0:UInt16 |
0:PropertyType |
M, RO |
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
Conformance Units |
|||||
|
MachineTool Production Job |
|||||
|
MachineTool Production Dynamic Job List |
|||||
|
MachineTool Production Job Available |
|||||
|
MachineTool Production Simple Parts Monitoring |
|||||
The components of the ProductionJobType have additional references which are defined in Table 39.
Table 39 – ProductionJobType Additional Subcomponents
|
BrowsePath |
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
Others |
|
PartSets |
0:HasComponent |
Object |
<PartSet> |
|
ProductionPartSetType |
MP |
|
ProductionPrograms |
0:HasOrderedComponent |
Object |
0:<OrderedObject> |
|
ProductionProgramType |
MP |
|
RunsPlanned |
0:HasProperty |
Variable |
IsValid |
Boolean |
PropertyType |
M, RO |
The Identifier is the identifier of the job. This Identifier is used to reference the job in other places of the AddressSpace, e.g., in the ProductionPartTransitionEventType. For this reason, the Identifier shall be unique.
The CustomerOrderIdentifier is used to reference the customer order this job belongs to. This information often originates from an external system handling production organisation (e.g., MES).
The OrderIdentifier is used to reference a company internal order the job belongs to. This information often originates from an external system handling production organisation (e.g., MES).
PartsCompleted indicates how many parts have been completed in the current job including all runs. This counter does not give any indication about the part quality. If PartSets are used, this counter shall be in sync with the respective PartsCompletedPerRun counter.
PartSets contains a list of ProductionPartSetType nodes related to the job. It is a list of the part sets, which contain the parts produced in the current run of the job. For the DisplayName of the <PartSet >, it is recommended to use the value of the Name Property of the respective ProductionPartSetType instance.
PartsGood indicates how many good parts have been completed in the current job including all runs. A part is counted as long as there is no contradicting evidence. Note that such evidence may arise in subsequent processing steps (on different machines), even if a part was counted as good. In this case, the data on the OPC UA Server are not changed retrospectively. If individual Parts are modelled, this counter shall be identical to the number of PartType instances with PartQuality set to Good, CapabilityUnavailable or WillNotBeMeasured.
ProductionPrograms contains a list of ProductionProgramType nodes representing the programs used in the job. This list is made out of at least one instance of ProductionProgramType. The ordering of the programs is displayed using the 0:HasOrderedComponent Reference and the 0:NumberInList component of the ProductionProgramType instance applied from the 0:IOrderedObjectType. The underlying ordering is the call sequence of the programs. The program called first shall have the number 0 and appear first along the OrderedComponents. For the DisplayName of the 0: <OrderedObject >, it is recommended to use the value of the Name Property of the respective ProductionProgramType instance.
The ProductionPrograms may include one single ProductionProgramType instance. If it contains more than one ProductionProgramType instance, the call hierarchy of the programs is not shown in this list. Neither is the relation of programs and channels modelled in the ProductionProgramType. Which programs to include in the list can be chosen by the integrator of the information model (e.g., main program only, subprograms included, …). The list shall include programs relevant to the job and manufacturing of the job, macros and cycles for general purpose tasks are usually not included.
RunsCompleted is a counter that increases after each completed run of the job. This means, the run was not aborted and finished regularly. This counter does not give any indication about the part quality.
RunsPlanned indicates how many times a job should be executed. RunsPlanned has a Property called IsValid, which indicates if the planned number of job runs is known to the machine (True) or not (False). The number of planned job runs not being known occurs in continuous production, that is if the machine is started with the respective job and job runs are repeated endlessly. The production process only ends when the machine is stopped by an external measure (operator or system).
State is an instance representation of the ProductionJobStateMachineType. It indicates the current state the job is in and the transition used to get into this state.
0:NumberInList is used to enumerate ProductionJobType instances used as list elements. This index shall be 0 for the first list element and increase by one for each subsequent list element. If nodes are deleted from the list or inserted into the list, the 0:NumberInList has to be adjusted for all following nodes in the list, such that the 0:NumberInList elements always form a sequential series of numbers.
[DEPRECATED in version 1.02] The ProductionProgramType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
The ProductionProgramType is the representation of a program. A program is a list of operations that the controller performs in sequence. It's usually a machine-readable file which is needed for the controller to fulfil the job.
The ProductionProgramType is formally defined in Table 40.
Table 40 – ProductionProgramType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ProductionProgramType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the 0:BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node |
|||||
|
0:HasProperty |
Variable |
Name |
0:String |
0:PropertyType |
M, RO |
|
0:HasComponent |
Object |
State |
|
ProductionProgramStateMachineType |
O |
|
0:HasInterface |
ObjectType |
0:IOrderedObjectType |
|
|
|
|
|
|
|
|
|
|
|
Applied from 0:IOrderedObjectType |
|||||
|
0:HasProperty |
Variable |
0:NumberInList |
0:UInt16 |
0:PropertyType |
M, RO |
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
Conformance Units |
|||||
|
MachineTool MachineToolType Mandatory Nodes |
|||||
|
MachineTool Production Basic |
|||||
The Name is used to distinguish and identify programs on a machine.
State is an instance representation of the ProductionProgramStateMachineType. It indicates the current state the part is in and the transition used to get into this state.
0:NumberInList is used to enumerate ProductionProgramType instances used as list elements. This index shall be 0 for the first list element and increase by one for each subsequent list element. If nodes are deleted from the list or inserted into the list, the 0:NumberInList has to be adjusted for all following nodes in the list, such that the 0:NumberInList elements always form a sequential series of numbers.
[DEPRECATED in version 1.02] The ProductionActiveProgramType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
The ProductionActiveProgramType is used to represent programs that are currently running within the machine.
The ProductionActiveProgramType is formally defined in Table 41.
Table 41 – ProductionActiveProgramType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ProductionActiveProgramType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the ProductionProgramType defined in 8.4.4 i.e. inheriting the InstanceDeclarations of that Node. |
|||||
|
0:HasComponent |
Variable |
JobNodeId |
0:NodeId |
0:BaseDataVariableType |
O, RO |
|
0:HasComponent |
Variable |
JobIdentifier |
0:String |
0:BaseDataVariableType |
O, RO |
|
0:HasComponent |
Object |
State |
|
ProductionProgramStateMachineType |
M |
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
Conformance Units |
|||||
|
MachineTool MachineToolType Mandatory Nodes |
|||||
|
MachineTool Production Basic |
|||||
JobNodeId contains the 0:NodeId of the ProductionJobType instance this program is used in.
JobIdentifier holds the same content as the Identifier Property of the ProductionJobType instance this program is used in.
State is inherited from the ProductionProgramType and overridden to be mandatory.
[DEPRECATED in version 1.02] The ProductionPartSetType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
The ProductionPartSetType is used to group parts within a production job. It also contains information about the parts in the group.
It is formally defined in Table 42. Its additional subcomponents are defined in Table 43.
Table 42 – ProductionPartSetType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ProductionPartSetType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the 0:BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node |
|||||
|
0:HasProperty |
Variable |
Name |
0:String |
0:PropertyType |
O, RO |
|
0:HasComponent |
Variable |
PartsPlannedPerRun |
0:UInt32 |
0:BaseDataVariableType |
M, RO |
|
0:HasComponent |
Variable |
PartsCompletedPerRun |
0:UInt32 |
0:BaseDataVariableType |
M, RO |
|
0:HasComponent |
Object |
PartsPerRun |
|
0:BaseObjectType |
O |
|
0:HasProperty |
Variable |
ContainsMixedParts |
0:Boolean |
0:PropertyType |
M, RO |
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
Conformance Units |
|||||
|
MachineTool Production Job |
|||||
|
MachineTool Production Dynamic Job List |
|||||
|
MachineTool Production Job Available |
|||||
Table 43 – ProductionPartSetType Additional Subcomponents
|
BrowsePath |
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
Others |
|
PartsPerRun |
0:HasComponent |
Object |
<Part> |
|
ProductionPartType |
MP |
Name is used to specify the type of parts in a group.
PartsPlannedPerRun indicates how many of the parts in this group are intended to be produced in one run of a job.
PartsCompletedPerRun indicates how many parts of this group have been completed in the current run of the job. This counter does not give any indication about the part quality.
PartsPerRun contains a list of the parts in the current run of the job. This list is made out of at least one <Part > instance of ProductionPartType. In each new run of the job, all variables in the part nodes are reset to their initial values. For the DisplayName of the <Part >, it is recommended to use the value of the Name Property of the respective ProductionPartType instance.
ContainsMixedParts indicates if the parts in a ProductionPartSetType may be different from each other (True) or if they are parts of the same type (False).
[DEPRECATED in version 1.02] The ProductionPartType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
The ProductionPartType represents a part. A part is the workpiece of the machine which is treated in the purpose of the machine.
This may be for the purpose of machining, measuring or others, depending on the type of machine.
The ProductionPartType is formally defined in Table 44.
Table 44 – ProductionPartType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ProductionPartType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the 0:BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node |
|||||
|
0:HasProperty |
Variable |
CustomerOrderIdentifier |
0:String |
0:PropertyType |
O, RO |
|
0:HasProperty |
Variable |
Name |
0:String |
0:PropertyType |
M, RO |
|
0:HasProperty |
Variable |
Identifier |
0:String |
0:PropertyType |
O, RO |
|
0:HasComponent |
Variable |
PartQuality |
PartQuality |
0:BaseDataVariableType |
M, RO |
|
0:HasComponent |
Variable |
ProcessIrregularity |
ProcessIrregularity |
0:BaseDataVariableType |
M, RO |
|
0:HasComponent |
Object |
State |
|
ProductionPartStateMachineType |
O |
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
Conformance Units |
|||||
|
MachineTool Production Job |
|||||
|
MachineTool Production Dynamic Job List |
|||||
|
MachineTool Production Job Available |
|||||
The Name is used to name a part in production in a machine. This name can be specific to the part (e.g., “MBL30/PartNo32001”) or to the type of part (e.g., “M8x10 Bolt Type 15”).
The CustomerOrderIdentifier is used to reference the customer order this job belongs to. This information often originates from an external system handling production organisation (e.g., MES).
The Identifier is used to distinguish and identify an individual part in production in a machine. It shall be unique.
PartQuality indicates the part quality. The PartQuality DataType is defined in 12.6.
ProcessIrregularity is used to tell if a process irregularity has been detected. A process irregularity might for example be the breakage of a tool or exceeding a temperature limit on coolant. The ProcessIrregularity DataType is defined in 12.7.
State is an instance representation of the ProductionPartStateMachineType. It indicates the current state in manufacturing the part is in and the transition used to get into this state.
[DEPRECATED in version 1.02] The ProductionStateMachineType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
The ProductionStateMachineType shows the states an element in production can be in and the possible transitions between those states. The states and transitions are depicted in Figure 15. Their representation in the OPC UA address space is given in Table 45. The name of each transition consists of the names of the states it connects: [FromState]To[ToState]. Their References are specified in Table 48.
Figure 15 – The States and Transitions of the ProductionStateMachineType
The ProductionStateMachineType is formally defined in Table 45.
Table 45 – ProductionStateMachineType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ProductionStateMachineType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the 0:FiniteStateMachineType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node. |
|||||
|
0:HasComponent |
Object |
Aborted |
|
0:StateType |
None |
|
0:HasComponent |
Object |
AbortedToInitializing |
|
0:TransitionType |
None |
|
0:HasComponent |
Variable |
0:CurrentState |
0:LocalizedText |
0:FiniteStateVariableType |
M, RO |
|
0:HasComponent |
Object |
Ended |
|
0:StateType |
None |
|
0:HasComponent |
Object |
EndedToInitializing |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
Initializing |
|
0:InitialStateType |
None |
|
0:HasComponent |
Object |
InitializingToAborted |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
InitializingToRunning |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
Interrupted |
|
0:StateType |
None |
|
0:HasComponent |
Object |
InterruptedToAborted |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
InterruptedToRunning |
|
0:TransitionType |
None |
|
0:HasComponent |
Variable |
0:LastTransition |
0:LocalizedText |
0:FiniteTransitionVariableType |
O, RO |
|
0:HasComponent |
Object |
Running |
|
0:StateType |
None |
|
0:HasComponent |
Object |
RunningToAborted |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
RunningToEnded |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
RunningToInterrupted |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
RunningToRunning |
|
0:TransitionType |
None |
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
Conformance Units |
|||||
|
MachineTool Production LastTransition |
|||||
The states and transitions shall have the numbers indicated in Table 47. The 0:Number property of 0:CurrentState and 0:LastTransition shall use those same numbers for the respective state/transition.
The components 0:CurrentState and 0:LastTransition of the ProductionStateMachineType have their optional property 0:Number changed to be mandatory, as defined in Table 46.
Table 46 – ProductionStateMachineType Additional Subcomponents
|
BrowsePath |
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
Others |
|
0:CurrentState |
0:HasProperty |
Variable |
0:Number |
0:UInt32 |
0:PropertyType |
M, RO |
|
0:LastTransition |
0:HasProperty |
Variable |
0:Number |
0:UInt32 |
0:PropertyType |
M, RO |
The state Aborted indicates that the operation of or on an element in production has been irreversibly stopped before finishing.
Ended is reached when the operation of or on an element in production has finished.
Initializing is the state in which the element in production is being prepared. During this state, the machine doesn’t have to be ready for production, although it has to be as soon as the transition InitializingToRunning is used. The production is not yet started.
Interrupted indicates that the execution of or on the element in production has been reversibly halted. This is usually due to an error or an intervention by the operating personnel. It is possible to restart operation of or on the element in production after it was in the interrupted state.
Running indicates that the operation of or on an element in production has been started or re-started and is currently running.
Table 47 – ProductionStateMachineType Attribute values for child Nodes
|
BrowsePath |
Value Attribute |
||
|
0 |
||
|
1 |
||
|
2 |
||
|
3 |
||
|
4 |
||
|
0 |
||
|
1 |
||
|
2 |
||
|
3 |
||
|
4 |
||
|
5 |
||
|
6 |
||
|
7 |
||
|
8 |
||
|
9 |
Fields may be empty which means this Attribute is not defined.
InitializingToRunning is triggered when the operation of or on an element in production starts.
RunningToEnded is triggered when the operation of or on an element in production finishes.
EndedToInitializing is triggered when re-initialization of the operation of or on an element in production starts.
RunningToRunning is triggered when another consecutive run of the operation of or on an element in production in direct succession starts.
RunningToInterrupted is triggered when the operation of or on an element in production is interrupted.
InterruptedToRunning is triggered when an interruption ends and the operation of or on an element in production continues running.
RunningToAborted is triggered when the operation of or on an element in production is aborted while in the Running state.
InterruptedToAborted is triggered when the operation of or on an element in production is aborted while in the Interrupted state.
AbortedToInitializing is triggered if the operation of or on an element in production is being re-initialized after an abort.
InitializingToAborted is triggered when the operation of or on an element in production is aborted while in the Initializing state.
Table 48 – ProductionStateMachineType Additional References
|
SourceBrowsePath |
ReferenceType |
Is Forward |
TargetBrowsePath |
|
AbortedToInitializing |
0:FromState |
True |
Aborted |
|
|
0:ToState |
True |
Initializing |
|
EndedToInitializing |
0:FromState |
True |
Ended |
|
|
0:ToState |
True |
Initializing |
|
InitializingToAborted |
0:FromState |
True |
Initializing |
|
|
0:ToState |
True |
Aborted |
|
InitializingToRunning |
0:FromState |
True |
Initializing |
|
|
0:ToState |
True |
Running |
|
InterruptedToAborted |
0:FromState |
True |
Interrupted |
|
|
0:ToState |
True |
Aborted |
|
InterruptedToRunning |
0:FromState |
True |
Interrupted |
|
|
0:ToState |
True |
Running |
|
RunningToAborted |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Aborted |
|
RunningToEnded |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Ended |
|
RunningToInterrupted |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Interrupted |
|
RunningToRunning |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Running |
[DEPRECATED in version 1.02] The ProductionJobStateMachineType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
The ProductionJobStateMachineType shows the states a production job can be in and the possible transitions between those states.
The ProductionJobStateMachineType is formally defined in Table 49.
Table 49 – ProductionJobStateMachineType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ProductionJobStateMachineType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the ProductionStateMachineType defined in 8.4.8 i.e. inheriting the InstanceDeclarations of that Node. |
|||||
|
0:GeneratesEvent |
ObjectType |
InterruptionConditionType |
|
|
|
|
0:HasComponent |
Object |
Aborted |
|
0:StateType |
None |
|
0:HasComponent |
Object |
AbortedToInitializing |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
Ended |
|
0:StateType |
None |
|
0:HasComponent |
Object |
EndedToInitializing |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
Initializing |
|
0:InitialStateType |
None |
|
0:HasComponent |
Object |
InitializingToAborted |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
InitializingToRunning |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
Interrupted |
|
0:StateType |
None |
|
0:HasComponent |
Object |
InterruptedToAborted |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
InterruptedToRunning |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
Running |
|
0:StateType |
None |
|
0:HasComponent |
Object |
RunningToAborted |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
RunningToEnded |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
RunningToInterrupted |
|
0:TransitionType |
None |
|
0:HasComponent |
Object |
RunningToRunning |
|
0:TransitionType |
None |
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
Conformance Units |
|||||
|
MachineTool Production ProductionJobStateMachineType |
|||||
|
MachineTool Production InterruptionConditionType |
|||||
When a new interruption occurs in the production job, an event of InterruptionConditionType can be sent to clarify the reason for the interruption. This is an option in addition to the Interrupted state of the ProductionStateMachineType. It is possible that other interruptions occur while the state machine is in the Interrupted state, e.g., the first interruption being due to a missing part and while the part is still missing, a utility change becomes necessary. In such a case, Events of InterruptionConditionType may be sent for each subsequent interruption. The transition InterruptedToRunning may only be used if no interruption is active. If the interrupted job is aborted (via InterruptedToAborted), the interruption may persist. If a job is then re-initialized via AbortedToInitializing, there are multiple possible cases. In one case the interruption is solved before the job enters the Initializing state. In this case, the same job can transition to Initializing. Another option, when the ProductionPlan is used statically, the job node can be overwritten with the new job being in the Initializing state. Depending on the production context, the interruption of the old job might persist. When the ProductionPlan is used dynamically, a new job node can be created. Whether the interruption can persist is again depending on the production context.
The ProductionJobStateMachineType allows to send Events of ProductionJobTransitionEventType with every transition, as indicated in Table 51. This makes it possible to send all relevant information of the ProductionJobType the state machine instance belongs to with the TransitionEvent.
The state Aborted indicates that the job has been irreversibly stopped before finishing. If the job enters this state, the state machines of any ProductionProgramType and ProductionPartType instances associated with it shall not remain in the state Running.
Ended is reached when the job has finished all its runs, so the value of RunsCompleted is the same as the one for RunsPlanned.
Initializing is the state in which the job is being prepared. That implies the job being scheduled for production in the near future. In this state, actions like e.g., loading and configuring programs, inserting tools and utilities and mounting workpieces may be conducted.
InitializingToRunning is triggered when the job starts. This can only be triggered if all preconditions to start the job are met. A job is usually started by starting a related control routine. This does not result in changes to the components and properties (other than State) of the ProductionJobType instance being started.
RunningToEnded is triggered when the last run of a job finishes. The value of RunsCompleted in the affected ProductionJobType instance is increased by one (and equal to the value of RunsPlanned) due to this transition. In the ProductionJobTransitionEventType, this increased value is sent. This transition also implies that all parts and programs related to the job will no longer change, so e.g., the quality information for each part is finally set.
EndedToInitializing is triggered when initialization of a new job starts. This transition is only used if the nodes in the ProductionPlan are never added or deleted, but remain static in the address space. In this case, all values of the ProductionJobType instance the state machine belongs to are changed to represent a different job. The values of this new job are sent with the ProductionJobTransitionEventType.
RunningToRunning is triggered when a new run of the job starts. The RunsCompleted of the affected ProductionJobType instance increases by one. The ProductionJobTransitionEventType shall send this increased value.
RunningToInterrupted is triggered when the job is interrupted. The point in time the interruption starts shall be when the machine gets the command to interrupt the job process. To indicate the reason for the interruption, an InterruptionConditionType with the appropriate ConditionClass may be sent. The components and properties (other than State) of the affected ProductionJobType instance stay unchanged.
InterruptedToRunning is triggered when an interruption ends and production continues running. This transition requires that no interruption is active, regardless of what interruption initially led to the RunningToInterrupted transition. The components and properties (other than State) of the affected ProductionJobType instance stay unchanged.
InterruptedToAborted is triggered when the job is aborted while in the Interrupted state. This transition does not require the reason for the interruption to be solved. The components and properties (other than State) of the affected ProductionJobType instance stay unchanged.
AbortedToInitializing is triggered if production is being re-initialized after an abort. This transition is only used if the nodes in the ProductionPlan are never added or deleted, but remain static in the address space. In this case, all values of the ProductionJobType instance the state machine belongs to are changed to represent a different job. The values of this new job are sent with the ProductionJobTransitionEventType.
The states and transitions shall have the numbers indicated in Table 50. The 0:Number property of 0:CurrentState and 0:LastTransition shall use those same numbers for the respective state/transition.
Table 50 – ProductionJobStateMachineType Attribute values for child Nodes
|
BrowsePath |
Value Attribute |
||
|
0 |
||
|
1 |
||
|
2 |
||
|
3 |
||
|
4 |
||
|
0 |
||
|
1 |
||
|
2 |
||
|
3 |
||
|
4 |
||
|
5 |
||
|
6 |
||
|
7 |
||
|
8 |
||
|
9 |
Fields may be empty which means this Attribute is not defined.
Table 51 – ProductionJobStateMachineType Additional References
|
SourceBrowsePath |
ReferenceType |
Is Forward |
TargetBrowsePath |
|
AbortedToInitializing |
0:FromState |
True |
Aborted |
|
|
0:ToState |
True |
Initializing |
|
|
0:HasEffect |
True |
ProductionJobTransitionEventType |
|
EndedToInitializing |
0:FromState |
True |
Ended |
|
|
0:ToState |
True |
Initializing |
|
|
0:HasEffect |
True |
ProductionJobTransitionEventType |
|
InitializingToAborted |
0:FromState |
True |
Initializing |
|
|
0:ToState |
True |
Aborted |
|
|
0:HasEffect |
True |
ProductionJobTransitionEventType |
|
InitializingToRunning |
0:FromState |
True |
Initializing |
|
|
0:ToState |
True |
Running |
|
|
0:HasEffect |
True |
ProductionJobTransitionEventType |
|
InterruptedToAborted |
0:FromState |
True |
Interrupted |
|
|
0:ToState |
True |
Aborted |
|
|
0:HasEffect |
True |
ProductionJobTransitionEventType |
|
InterruptedToRunning |
0:FromState |
True |
Interrupted |
|
|
0:ToState |
True |
Running |
|
|
0:HasEffect |
True |
ProductionJobTransitionEventType |
|
RunningToAborted |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Aborted |
|
|
0:HasEffect |
True |
ProductionJobTransitionEventType |
|
RunningToEnded |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Ended |
|
|
0:HasEffect |
True |
ProductionJobTransitionEventType |
|
RunningToInterrupted |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Interrupted |
|
|
0:HasEffect |
True |
ProductionJobTransitionEventType |
|
RunningToRunning |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Running |
|
|
0:HasEffect |
True |
ProductionJobTransitionEventType |
[DEPRECATED in version 1.02] The ProductionProgramStateMachineType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
The ProductionProgramStateMachineType shows the states a program can be in and the possible transitions between those states. Their representation in the OPC UA address space is given in Table 54. The name of each transition consists of the names of the states it connects: [FromState]To[ToState].
The ProductionProgramStateMachineType is formally defined in Table 52.
Table 52 – ProductionProgramStateMachineType Definition
|
Attribute |
Value |
|||||
|
BrowseName |
ProductionProgramStateMachineType |
|||||
|
IsAbstract |
False |
|||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
|
Subtype of the ProductionStateMachineType defined in 8.4.8 i.e. inheriting the InstanceDeclarations of that Node. |
||||||
|
0:HasComponent |
Object |
Aborted |
|
0:StateType |
None |
|
|
0:HasComponent |
Object |
AbortedToInitializing |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
Ended |
|
0:StateType |
None |
|
|
0:HasComponent |
Object |
EndedToInitializing |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
Initializing |
|
0:InitialStateType |
None |
|
|
0:HasComponent |
Object |
InitializingToAborted |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
InitializingToRunning |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
Interrupted |
|
0:StateType |
None |
|
|
0:HasComponent |
Object |
InterruptedToAborted |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
InterruptedToRunning |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
Running |
|
0:StateType |
None |
|
|
0:HasComponent |
Object |
RunningToAborted |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
RunningToEnded |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
RunningToInterrupted |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
RunningToRunning |
|
0:TransitionType |
None |
|
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
|
Conformance Units |
||||||
|
MachineTool Production ProductionProgramStateMachineType |
||||||
The ProductionProgramStateMachineType allows to send Events of ProductionProgramTransitionEventType with every transition, as indicated in Table 54. This makes it possible to send all relevant information of the ProductionProgramType the state machine instance belongs to with the TransitionEvent.
Initializing is the state in which the program is not yet started.
Interrupted indicates that the execution of the program has been paused and can be continued. This might be due to waiting for the execution of a subprogram or until a certain condition is met, e.g., the doors of the machine are closed.
EndedToInitializing is only used if the nodes in the ProductionPlan are never added or deleted, but remain static in the address space. The Transition is triggered when a new program is loaded. In this case, all values of the ProductionProgramType instance the state machine belongs to are changed to represent a different program. The values of this new job are sent with the ProductionProgramTransitionEventType.
The states and transitions shall have the numbers indicated in Table 53. The 0:Number property of 0:CurrentState and 0:LastTransition shall use those same numbers for the respective state/transition.
Table 53 – ProductionProgramStateMachineType Attribute values for child Nodes
|
BrowsePath |
Value Attribute |
||
|
0 |
||
|
1 |
||
|
2 |
||
|
3 |
||
|
4 |
||
|
0 |
||
|
1 |
||
|
2 |
||
|
3 |
||
|
4 |
||
|
5 |
||
|
6 |
||
|
7 |
||
|
8 |
||
|
9 |
Fields may be empty which means this Attribute is not defined.
Table 54 – ProductionProgramStateMachineType Additional References
|
SourceBrowsePath |
ReferenceType |
Is Forward |
TargetBrowsePath |
|
AbortedToInitializing |
0:FromState |
True |
Aborted |
|
|
0:ToState |
True |
Initializing |
|
|
0:HasEffect |
True |
ProductionProgramTransitionEventType |
|
EndedToInitializing |
0:FromState |
True |
Ended |
|
|
0:ToState |
True |
Initializing |
|
|
0:HasEffect |
True |
ProductionProgramTransitionEventType |
|
InitializingToAborted |
0:FromState |
True |
Initializing |
|
|
0:ToState |
True |
Aborted |
|
|
0:HasEffect |
True |
ProductionProgramTransitionEventType |
|
InitializingToRunning |
0:FromState |
True |
Initializing |
|
|
0:ToState |
True |
Running |
|
|
0:HasEffect |
True |
ProductionProgramTransitionEventType |
|
InterruptedToAborted |
0:FromState |
True |
Interrupted |
|
|
0:ToState |
True |
Aborted |
|
|
0:HasEffect |
True |
ProductionProgramTransitionEventType |
|
InterruptedToRunning |
0:FromState |
True |
Interrupted |
|
|
0:ToState |
True |
Running |
|
|
0:HasEffect |
True |
ProductionProgramTransitionEventType |
|
RunningToAborted |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Aborted |
|
|
0:HasEffect |
True |
ProductionProgramTransitionEventType |
|
RunningToEnded |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Ended |
|
|
0:HasEffect |
True |
ProductionProgramTransitionEventType |
|
RunningToInterrupted |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Interrupted |
|
|
0:HasEffect |
True |
ProductionProgramTransitionEventType |
|
RunningToRunning |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Running |
|
|
0:HasEffect |
True |
ProductionProgramTransitionEventType |
[DEPRECATED in version 1.02] The ProductionPartStateMachineType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added.
The ProductionPartStateMachineType shows the states a part can be in and the possible transitions between those states. Their representation in the OPC UA address space is given in Table 57. The name of each transition consists of the names of the states it connects: [FromState]To[ToState].
The ProductionPartStateMachineType is formally defined in Table 55.
Table 55 – ProductionPartStateMachineType Definition
|
Attribute |
Value |
|||||
|
BrowseName |
ProductionPartStateMachineType |
|||||
|
IsAbstract |
False |
|||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
|
Subtype of the ProductionStateMachineType defined in 8.4.8 i.e. inheriting the InstanceDeclarations of that Node. |
||||||
|
0:HasComponent |
Object |
Aborted |
|
0:StateType |
None |
|
|
0:HasComponent |
Object |
AbortedToInitializing |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
Ended |
|
0:StateType |
None |
|
|
0:HasComponent |
Object |
EndedToInitializing |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
Initializing |
|
0:InitialStateType |
None |
|
|
0:HasComponent |
Object |
InitializingToAborted |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
InitializingToRunning |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
Interrupted |
|
0:StateType |
None |
|
|
0:HasComponent |
Object |
InterruptedToAborted |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
InterruptedToRunning |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
Running |
|
0:StateType |
None |
|
|
0:HasComponent |
Object |
RunningToAborted |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
RunningToEnded |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
RunningToInterrupted |
|
0:TransitionType |
None |
|
|
0:HasComponent |
Object |
RunningToRunning |
|
0:TransitionType |
None |
|
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
|
Conformance Units |
||||||
|
MachineTool Production ProductionPartStateMachineType |
||||||
The ProductionPartStateMachineType allows to send Events of ProductionPartTransitionEventType with every transition, as indicated in Table 57. This makes it possible to send all relevant information of the ProductionPartType the state machine instance belongs to with the TransitionEvent.
Ended is reached when the production on the part has finished. The PartQuality may be changed while in this state, implying that the part is measured after the production process. The part does not have to be mounted inside the machine while in this state.
Initializing implies the part is scheduled for production, but the machining process on the part has not yet started. The part does not have to be mounted inside the machine while in this state.
Running indicates that the processing of the part within the machine has been started or re-started and is currently running.
InitializingToRunning is triggered when the processing of the part starts. This Transition requires the part to be mounted within the machine.
RunningToEnded is triggered when the processing of the part finishes. This Transition does not require an update of the PartQuality.
The states and transitions shall have the numbers indicated in Table 56. The 0:Number property of 0:CurrentState and 0:LastTransition shall use those same numbers for the respective state/transition.
Table 56 – ProductionPartStateMachineType Attribute values for child Nodes
|
BrowsePath |
Value Attribute |
||
|
0 |
||
|
1 |
||
|
2 |
||
|
3 |
||
|
4 |
||
|
0 |
||
|
1 |
||
|
2 |
||
|
3 |
||
|
4 |
||
|
5 |
||
|
6 |
||
|
7 |
||
|
8 |
||
|
9 |
Fields may be empty which means this Attribute is not defined.
Table 57 – ProductionPartStateMachineType Additional References
|
SourceBrowsePath |
ReferenceType |
Is Forward |
TargetBrowsePath |
|
AbortedToInitializing |
0:FromState |
True |
Aborted |
|
|
0:ToState |
True |
Initializing |
|
|
0:HasEffect |
True |
ProductionPartTransitionEventType |
|
EndedToInitializing |
0:FromState |
True |
Ended |
|
|
0:ToState |
True |
Initializing |
|
|
0:HasEffect |
True |
ProductionPartTransitionEventType |
|
InitializingToAborted |
0:FromState |
True |
Initializing |
|
|
0:ToState |
True |
Aborted |
|
|
0:HasEffect |
True |
ProductionPartTransitionEventType |
|
InitializingToRunning |
0:FromState |
True |
Initializing |
|
|
0:ToState |
True |
Running |
|
|
0:HasEffect |
True |
ProductionPartTransitionEventType |
|
InterruptedToAborted |
0:FromState |
True |
Interrupted |
|
|
0:ToState |
True |
Aborted |
|
|
0:HasEffect |
True |
ProductionPartTransitionEventType |
|
InterruptedToRunning |
0:FromState |
True |
Interrupted |
|
|
0:ToState |
True |
Running |
|
|
0:HasEffect |
True |
ProductionPartTransitionEventType |
|
RunningToAborted |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Aborted |
|
|
0:HasEffect |
True |
ProductionPartTransitionEventType |
|
RunningToEnded |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Ended |
|
|
0:HasEffect |
True |
ProductionPartTransitionEventType |
|
RunningToInterrupted |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Interrupted |
|
|
0:HasEffect |
True |
ProductionPartTransitionEventType |
|
RunningToRunning |
0:FromState |
True |
Running |
|
|
0:ToState |
True |
Running |
|
|
0:HasEffect |
True |
ProductionPartTransitionEventType |
[DEPRECATED in version 1.02] The ProductionType containing the ProductionStatisticsType will be replaced by the job management defined in OPC 40001-3 in future versions of this specification. Hence the 0:IsDeprecated Reference was added for the ProductionStatisticsType. The PartsProducedInLifetime counter is added to the 2:OperationCounters in the MachineOperationMonitoringType (see section 8.3.9).
The ProductionStatisticsType aggregates statistics information related to production on the machine.
The ProductionStatisticsType is formally defined in Table 58.
Table 58 – ProductionStatisticsType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ProductionStatisticsType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the 0:BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node. |
|||||
|
0:HasComponent |
Variable |
PartsProducedInLifetime |
0:UInt32 |
0:BaseDataVariableType |
O, RO |
|
0:IsDeprecated |
Object |
MachineTool_v102 |
|
0:BaseObjectType |
|
|
Conformance Units |
|||||
|
MachineTool Production Job |
|||||
|
MachineTool Production PartsProducedInLifetime |
|||||
PartsProducedInLifetime is the counter for the total number of produced parts during the machine’s lifetime. The exact way this number is acquired may differ between different machines. No quality information of PartsProducedInLifetime can be given.