The BaseToolType serves as a supertype to the ToolType and the MultiToolType. It is an abstract type, meaning it is not instantiated, only the subtypes are.

The BaseToolType is formally defined in Table 58.

Table 58 – BaseToolType Definition

Attribute	Value
BrowseName	BaseToolType
IsAbstract	True
References	Node Class	BrowseName	DataType	TypeDefinition		Other
Subtype of the 0:BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node.
0:HasProperty	Variable	Identifier	0:String		0:PropertyType	O, RO
0:HasComponent	Object	Location			0:BaseObjectType	O
0:HasProperty	Variable	Name	0:String		0:PropertyType	O, RO
Conformance Units
MachineTool Equipment ToolIdentification
MachineTool Equipment Dynamic Tool List

Table 59 – BaseToolType Additional Subcomponents

BrowsePath	References	NodeClass	BrowseName	DataType	TypeDefinition	Others
Location	0:HasProperty	Variable	Name	0:String	0:PropertyType	M, RO
Location	0:HasProperty	Variable	PlaceNumber	0:UInt16	0:PropertyType	M, RO

Identifier is a unique identifier for a tool. The Identifier can be used to provide a unique ID given by a superordinated management system. This ID can’t be generated on the machine, it has to be transferred to the machine by a global tool management system.

The Location indicates where the tool is located, represented by Name, a name for the tool’s location (e.g. the tool magazine) and PlaceNumber, the place number at this location (refer to Table 59). If there is a shared magazine for multiple machines, a tool will be shown in the tool list (see 8.5.1 and 8.5.2) of all machines for which the tool is available.

The Name is used to name a tool to ease recognition. This name can be specific to the tool (e.g. “special_formpress_part294”), to the type of tool (e.g. “8mm drill”) or to the program (e.g. “T3”).