The InterruptionConditionType is used to indicate interruptions in the production process and give information about the underlying reason.

The InterruptionConditionType is formally defined in Table 78.

Table 78 – InterruptionConditionType Definition

Attribute		Value
BrowseName		InterruptionConditionType
IsAbstract		True
References	NodeClass		BrowseName	DataType	TypeDefinition		Other
Subtype of the 0:ConditionType defined in OPC 10000-9, which means it inherits the InstanceDeclarations of that Node.
0:HasProperty	Variable		IsAutomated	0:Boolean		0:PropertyType		M, RO
Conformance Units
MachineTool Production InterruptionConditionType

IsAutomated being True indicates that the interruption will automatically end in normal operation of the machine. A tool change for example can be automated and handled by the machine itself. The tool change might also not be automated. In that case an operator has to change the tool manually.

To indicate the reason for the process to be interrupted, the Components ConditionClassId and ConditionClassName of the InterruptionConditionType shall indicate the most appropriate ConditionClass. This specification defines special ConditionClasses relevant to the domain of machine tools (see 10). Of the ConditionClasses defined in OPC 10000-9, especially the SafetyConditionClassType shall be considered as well.