The InterruptionConditionTypeis used to indicate interruptions in the production process and give information about the underlying reason.

The InterruptionConditionTypeis formally defined in Table 78.

Table 78– InterruptionConditionType Definition

Attribute

Value

BrowseName

InterruptionConditionType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:ConditionTypedefined in OPC 10000-9, which means it inherits the InstanceDeclarations of that Node.

0:HasProperty

Variable

IsAutomated

0:Boolean

0:PropertyType

M, RO

Conformance Units

MachineTool Production InterruptionConditionType

IsAutomatedbeing True indicates that the interruption will automatically end in normal operation of the machine. A tool change for example can be automated and handled by the machine itself. The tool change might also not be automated. In that case an operator has to change the tool manually.

To indicate the reason for the process to be interrupted, the Components ConditionClassIdand ConditionClassNameof the InterruptionConditionTypeshall indicate the most appropriate ConditionClass. This specification defines special ConditionClassesrelevant to the domain of machine tools (see 10). Of the ConditionClassesdefined in OPC 10000-9, especially the SafetyConditionClassTypeshall be considered as well.