Laboratory and Analytical Devices - 7.6.12 MultiStateDiscreteControlFunctionType ObjectType Definition

The MultiStateDiscreteControlFunctionType describes a discrete control function (using more than two discrete values). It is formally defined in Table 109.

Table 109 – MultiStateDiscreteControlFunctionType Definition

Attribute	Value
BrowseName	MultiStateDiscreteControlFunctionType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the DiscreteControlFunctionType defined in 7.6.1
0:HasComponent	Variable	CurrentValue	UInt32	MultiStateDiscreteType	M
0:HasComponent	Variable	TargetValue	UInt32	MultiStateDiscreteType	M
Conformance Units
LADS MultiStateDiscreteControlFunctionType

Table 110 – MultiStateDiscreteControlFunctionType AdditionalSubcomponents

BrowsePath	References	NodeClass	BrowseName	DataType	TypeDefinition	Others
ControlFunctionState	HasComponent	Method	StartWithTargetValue			O

The StartWithTargetValue Method starts a Function on the LADS Device with the target value as an argument.

The signature of this Method is specified below. Table 91 and Note: The optional TargetValue can be also empty. In this case it should be handled as it not exiting.Note: The optional TargetValue can be also empty. In this case it should be handled as it not exiting.

Table 92 specify the Arguments and AddressSpace representation, respectively.

Signature

StartWithTargetValue (

[in]UInt32TargetValue)

Table 111 – StartWithTargetValue Method Arguments

Argument	Description
TargetValue	(Optional) This value can be used to set the target value parallel with the start method.

Note: The optional TargetValue can be also empty. In this case it should be handled as it not exiting.

Table 112 – StartWithTargetValue Method AddressSpace Definition